TX body trim sell-off extravaganza - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tlcrz1972 · 09-20-2013, 10:13 PM

I’m ready to thin down some more parts that I won’t be using.

What I will show pictures of will be all of the body side moulding trim that I have.

There is 2 incomplete sets of Suburban upper trim, I will sell them off by the piece, or otherwise.

And I have a lot of 69-72 upper and lower moulding pieces for long bed and a few pieces for a longhorn in various conditions. Some have the attach clips some don’t. And the really bad stuff will donate the clips to the better stuff. And what doesn’t sell will most likely end up in my aluminum recycling tub.

I do have the bed trim set for a 68 long bed, condition is kinda good, but some screws have been installed through them.

Look at the pictures many of them are labeled so it will keep the confusion to a minimum. I usually go first one to inquire about a part gets first dibbs at it and then second call get's a chance if the first one declines to buy it etc.
If your first to ask about a part and then you try to bargain with me over my price, and if someone posts interest in it I’ll deal with them and see what kind of deal we can make.

All shipping is extra, and I would like to have several orders made before I go to the post office or other shipping service to get quotes on shipping. So I might not get it quoted or shipped for a couple of days. I do have work that I have to do this around.

And larger parts can be shipped, but shipping them is a pain, and making boxes or crates does cost me. So picking up the larger stuff is always preferred.

Plus keep all inquiries on the thread. And we will PM after the deal is made.

And on paypal payments above $20.00 there will be a 3.045% add on for their take of the transaction.
Money orders and cash are good alternatives as well.

Attention everyone:[COLOR="DarkOrange"]

Please keep all inquiries on this thread, it helps me keep up with everyones wants and needs. So I don't miss your request.

And again all shipping is extra.

If that minimal cost will break you it might just break me.
Plus I have to get the shipping materials to get the parts to you, so that should be fair.

Thanks

Now for some parts and prices:
Suburban upper trim
Some of them have overspray on the lower edge, but it appears with a little time the paint will rub off, and all of it appears to polish up nicely.
All the trim is in good driver condition, some small scratches, dents and dings, and the long ones have a little bend/bow to them but once installed it won't be an issue.

LH rear 1/4 trim sold
RH rear 1/4 trim $42.00 (1 available) (w/o attach hole)
RH front door trim sold
RH rear door trim sold
Tail gate hatch trim sold
Barn door trim RH & LH pieces sold
RH & LH rear corner piecessold

I have a qty of 27 (twenty seven) of the push in spring clips for suburban upper trim in good complete used condition. all sold

And a qty of 5 (five) of the threaded type clips for suburban upper trim in good complete used condition. all sold

Now for the rest of the trim:
Some of the trim is in good driver condition some is not all that good, some small and some large scratches, some dents and dings, some are bent, some the paint or woodgrain is good condition others are not. Please inquire.

Prices will range from $12.00 on the real nice stuff to $5.00 for the not so good stuff. When inquiring reference the number by the trim so I know which one your looking at.

pictures #1 & 2 LH 1/4 trim

more pictures to follow:

tlcrz1972 · 09-20-2013, 10:18 PM

pictures of upper & lower front cab corner trim, emblems, Rh taillight trim

more to follow:

tlcrz1972 · 09-20-2013, 10:26 PM

picture 1: Rh & LH lower front fender and grill bowtie

picture 2: LH lower front fender trim

picture 3: LH lower front fender trim

picture 4: headlight attach rings sold

picture 5: lower RH long bed trim

more to follow:

tlcrz1972 · 09-20-2013, 10:30 PM

pictures #1, 2 & 3: lower longbed trim

picture #4: lower bed trim and door trim

Picture #5: overview shot

More to come:

tlcrz1972 · 09-20-2013, 10:34 PM

picture #1: Lower door trim

Picture #2: lower door trim and upper door trim and upper fender trim

Picture #3: upper fender trim

picture #4 & 5: upper longbed trim 1 piece sold 2 remain

more to come:

**davischevy** · 09-20-2013, 10:34 PM

What pieces of Longhorn trim do you have?

Thanks,
Larry

tlcrz1972 · 09-20-2013, 10:44 PM

pictures #1, 2, 3, 4 '71-'72 front windshield trim
I have enough for 2 full sets $85.00 plus shipping

and one extra LH and lower piece, $18.00 each

several corner and center clips $5.00 ea

Condition is good driver; some dents dings, scratches etc.

WV1967LWB · 09-20-2013, 10:47 PM

Interested in the 68 LWB trim
Posted via Mobile Device

tlcrz1972 · 09-20-2013, 10:55 PM

pictures 1 & 2: rear cab divider trim (1 LH and 1 RH) $20.00 ea 1 set sold

One piece is damaged $5.00

And I have one cab divider center dividing piece sold

picture #3 & 4: longhorn LH fwd and LH rear lower trim

picture #5: longhorn upper trim (some bends, some dents, some screw holes)

more to follow:

tlcrz1972 · 09-20-2013, 11:00 PM

picture #1: lower fwd RH longhorn bed trim

picture #2, 3, 4: '68 longbed RH trim sold

more to follow:

tlcrz1972 · 09-20-2013, 11:04 PM

pictures 1, 2, 3: '68 longbed LH trim sold

picture 4: '69-72 rear light trim

That's most of it I may add a few more pictures later.

Thanks

WV1967LWB · 09-20-2013, 11:13 PM

Give me a price for all the 1968 LWB trim shipped to 25403.
Hopefully I can straighten a few of those pieces out.
Posted via Mobile Device

**Bgrdmoose** · 09-20-2013, 11:45 PM

Barn door trim to 98144.
Thanks
Posted via Mobile Device

chuckmc8 · 09-21-2013, 04:35 AM

I need the 67/68 RH taillight trim ( I think they are the same as 69) and the trim piece that goes across the tailgate. Shipping to 30135 please

towbar · 09-21-2013, 09:11 AM

looking for good driver taillight bezels for 69-72 as well as the lower tailgate trim for a C/10 deluxe (without tailgate band)

tlcrz1972 · 09-21-2013, 09:48 AM

OK, There are some pictures I posted after your post.

look at them and verify if the parts are what you are interested in.

How's $60.00 plus shipping sound?

Quote:

Originally Posted by WV1967LWB

Interested in the 68 LWB trim
Posted via Mobile Device

tlcrz1972 · 09-21-2013, 09:53 AM

I'm asking $42.00 ea

And I'll ship them to you for $10.00

Quote:

Originally Posted by Bgrdmoose

Barn door trim to 98144.
Thanks
Posted via Mobile Device

tlcrz1972 · 09-21-2013, 09:54 AM

Sorry, I don't have those parts.

Quote:

Originally Posted by towbar

looking for good driver taillight bezels for 69-72 as well as the lower tailgate trim for a C/10 deluxe (without tailgate band)

**cst204x4** · 09-21-2013, 09:57 AM

Interested in a pair of cab divider trim if dent free shipped to 48817 thanks Mike
Posted via Mobile Device

tlcrz1972 · 09-21-2013, 09:57 AM

I have a LH tail light trim piece but feel it is to banged up.
Sorry no tailgate trim.

QUOTE=chuckmc8;6279026]I need the 67/68 RH taillight trim ( I think they are the same as 69) and the trim piece that goes across the tailgate. Shipping to 30135 please[/QUOTE]

tlcrz1972 · 09-21-2013, 10:09 AM

Being dent free is the challenge, I have one RH piece that is pretty good, but will need a good polishing job to make it shine.

Quote:

Originally Posted by cst204x4

Interested in a pair of cab divider trim if dent free shipped to 48817 thanks Mike
Posted via Mobile Device

tommys72 · 09-21-2013, 10:20 AM

I need a piece of upper long bed trim, and two head light rings for my 72, price plus shipping to 28540 please
Posted via Mobile Device

tlcrz1972 · 09-21-2013, 11:10 AM

The only upper bed trim I have is in post #5 pictures 4 & 5.

The piece has not been screwed through, but has it's dents and dings, and is a little bowed, but might laydown good to the body when attached by clips.

I have two fairly good head light rings labeled "A" & "D" in post #3 picture 4

I'll do $10.00 plus shipping on the long bed trim piece. And I'll have to get it quoted for shipping.

And go $16.00 for both light rings, with $7.00 for shipping them. Sorry I't won't be feasible to try and ship them together.

Quote:

Originally Posted by tommys72

I need a piece of upper long bed trim, and two head light rings for my 72, price plus shipping to 28540 please
Posted via Mobile Device

tommys72 · 09-21-2013, 11:57 AM

Quote:

Originally Posted by tlcrz1972

The only upper bed trim I have is in post #5 pictures 4 & 5.

The piece has not been screwed through, but has it's dents and dings, and is a little bowed, but might laydown good to the body when attached by clips.

I have two fairly good head light rings labeled "A" & "D" in post #3 picture 4

I'll do $10.00 plus shipping on the long bed trim piece. And I'll have to get it quoted for shipping.

And go $16.00 for both light rings, with $7.00 for shipping them. Sorry I't won't be feasible to try and ship them together.

A little bowed is better than what I have now. ..ill take the trim and rings. Pm me your info and total price for the items
Posted via Mobile Device

**cst204x4** · 09-21-2013, 02:58 PM

I will take the RH cab trim and any clips you have for it. How bad is the lh trim? Also interested in any oe clips for upper truck moulding. Thanks Mike
Posted via Mobile Device

09-20-2013, 10:34 PM	#6
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,794	Re: body trim sell-off extravaganza What pieces of Longhorn trim do you have? Thanks, Larry

09-20-2013, 10:44 PM	#7
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza pictures #1, 2, 3, 4 '71-'72 front windshield trim I have enough for 2 full sets $85.00 plus shipping and one extra LH and lower piece, $18.00 each several corner and center clips $5.00 ea Condition is good driver; some dents dings, scratches etc. Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

09-20-2013, 10:47 PM	#8
WV1967LWB Registered User Join Date: Apr 2012 Location: Martinsburg, WV Posts: 19	Re: body trim sell-off extravaganza Interested in the 68 LWB trim Posted via Mobile Device

09-20-2013, 10:55 PM	#9
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza pictures 1 & 2: rear cab divider trim (1 LH and 1 RH) $20.00 ea 1 set sold One piece is damaged $5.00 And I have one cab divider center dividing piece sold picture #3 & 4: longhorn LH fwd and LH rear lower trim picture #5: longhorn upper trim (some bends, some dents, some screw holes) more to follow: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 10-11-2013 at 04:59 PM. Reason: sold

09-20-2013, 11:00 PM	#10
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza picture #1: lower fwd RH longhorn bed trim picture #2, 3, 4: '68 longbed RH trim sold more to follow: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 10-11-2013 at 04:58 PM.

09-20-2013, 10:13 PM	#1
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	body trim sell-off extravaganza I’m ready to thin down some more parts that I won’t be using. What I will show pictures of will be all of the body side moulding trim that I have. There is 2 incomplete sets of Suburban upper trim, I will sell them off by the piece, or otherwise. And I have a lot of 69-72 upper and lower moulding pieces for long bed and a few pieces for a longhorn in various conditions. Some have the attach clips some don’t. And the really bad stuff will donate the clips to the better stuff. And what doesn’t sell will most likely end up in my aluminum recycling tub. I do have the bed trim set for a 68 long bed, condition is kinda good, but some screws have been installed through them. Look at the pictures many of them are labeled so it will keep the confusion to a minimum. I usually go first one to inquire about a part gets first dibbs at it and then second call get's a chance if the first one declines to buy it etc. If your first to ask about a part and then you try to bargain with me over my price, and if someone posts interest in it I’ll deal with them and see what kind of deal we can make. All shipping is extra, and I would like to have several orders made before I go to the post office or other shipping service to get quotes on shipping. So I might not get it quoted or shipped for a couple of days. I do have work that I have to do this around. And larger parts can be shipped, but shipping them is a pain, and making boxes or crates does cost me. So picking up the larger stuff is always preferred. Plus keep all inquiries on the thread. And we will PM after the deal is made. And on paypal payments above $20.00 there will be a 3.045% add on for their take of the transaction. Money orders and cash are good alternatives as well. Attention everyone:[COLOR="DarkOrange"] Please keep all inquiries on this thread, it helps me keep up with everyones wants and needs. So I don't miss your request. And again all shipping is extra. If that minimal cost will break you it might just break me. Plus I have to get the shipping materials to get the parts to you, so that should be fair. Thanks Now for some parts and prices: Suburban upper trim Some of them have overspray on the lower edge, but it appears with a little time the paint will rub off, and all of it appears to polish up nicely. All the trim is in good driver condition, some small scratches, dents and dings, and the long ones have a little bend/bow to them but once installed it won't be an issue. LH rear 1/4 trim sold RH rear 1/4 trim $42.00 (1 available) (w/o attach hole) RH front door trim sold RH rear door trim sold Tail gate hatch trim sold Barn door trim RH & LH pieces sold RH & LH rear corner piecessold I have a qty of 27 (twenty seven) of the push in spring clips for suburban upper trim in good complete used condition. all sold And a qty of 5 (five) of the threaded type clips for suburban upper trim in good complete used condition. all sold Now for the rest of the trim: Some of the trim is in good driver condition some is not all that good, some small and some large scratches, some dents and dings, some are bent, some the paint or woodgrain is good condition others are not. Please inquire. Prices will range from $12.00 on the real nice stuff to $5.00 for the not so good stuff. When inquiring reference the number by the trim so I know which one your looking at. pictures #1 & 2 LH 1/4 trim more pictures to follow: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 11-28-2013 at 12:03 PM. Reason: clr$sldsld

09-20-2013, 10:18 PM	#2
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza pictures of upper & lower front cab corner trim, emblems, Rh taillight trim more to follow: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

09-20-2013, 10:26 PM	#3
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza picture 1: Rh & LH lower front fender and grill bowtie picture 2: LH lower front fender trim picture 3: LH lower front fender trim picture 4: headlight attach rings sold picture 5: lower RH long bed trim more to follow: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 10-11-2013 at 05:00 PM. Reason: sold

09-20-2013, 10:30 PM	#4
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza pictures #1, 2 & 3: lower longbed trim picture #4: lower bed trim and door trim Picture #5: overview shot More to come: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

09-20-2013, 11:04 PM	#11
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza pictures 1, 2, 3: '68 longbed LH trim sold picture 4: '69-72 rear light trim That's most of it I may add a few more pictures later. Thanks Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 10-11-2013 at 04:57 PM. Reason: 68sold

09-20-2013, 11:13 PM	#12
WV1967LWB Registered User Join Date: Apr 2012 Location: Martinsburg, WV Posts: 19	Re: body trim sell-off extravaganza Give me a price for all the 1968 LWB trim shipped to 25403. Hopefully I can straighten a few of those pieces out. Posted via Mobile Device

09-20-2013, 11:45 PM	#13
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 436	Re: body trim sell-off extravaganza Barn door trim to 98144. Thanks Posted via Mobile Device

09-21-2013, 04:35 AM	#14
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: body trim sell-off extravaganza I need the 67/68 RH taillight trim ( I think they are the same as 69) and the trim piece that goes across the tailgate. Shipping to 30135 please __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

09-21-2013, 09:11 AM	#15
towbar Registered User Join Date: Jul 2012 Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!! Posts: 537	Re: body trim sell-off extravaganza looking for good driver taillight bezels for 69-72 as well as the lower tailgate trim for a C/10 deluxe (without tailgate band)

09-21-2013, 09:57 AM	#19
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 1,999	Re: body trim sell-off extravaganza Interested in a pair of cab divider trim if dent free shipped to 48817 thanks Mike Posted via Mobile Device __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles



Register or Log In To remove these advertisements.

09-21-2013, 10:20 AM	#22
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,075	Re: body trim sell-off extravaganza I need a piece of upper long bed trim, and two head light rings for my 72, price plus shipping to 28540 please Posted via Mobile Device __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son

09-21-2013, 02:58 PM	#25
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 1,999	Re: body trim sell-off extravaganza I will take the RH cab trim and any clips you have for it. How bad is the lh trim? Also interested in any oe clips for upper truck moulding. Thanks Mike Posted via Mobile Device __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

Register or Log In To remove these advertisements.