SC Complete Cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 01-07-2014, 06:13 PM

Ok guy's here is a chance to get the best of the best. This is 100% Chevy truck cluster. No it's not perfect but... You are getting a completely redone by member TBONE1964 stock chevy dash with Tach, speed warning, clock, and all the other working gauges. All gauges are Chevy parts no aftermarkets. The cluster was sent to TBONE1964 to have all new decals installed on the Tach, speedo.
This cluster is 100% working GM stuff. I collected all the parts myself over the past 20 years and it was in my truck up until last summer. I want to be up front about this because it's a lot of money to spend but if you buy it you know what you have.
1 issue and I think I have it fixed. The speed warning plastic gear that the cable attached to was broke on the speedo. TBONE1964 said he thought he had it fixed but it broke again the first time I tried it. Not his fault by no means it's plastic, so what I did was drill and ran a all threaded rod to join the 2 peices and so far it seems to be holding together. This is the only thing I can say that is are was wrong with it. So anyway the big question...how much! I think for what I have it's worth a price of $850.00 + shipping, LMC has the tach dash for $600.00 something so this to me is a bargin.
The cluster is a nice peice but it's not perfect nor is it a orignal cluster so don't talk about what it should be, it's what it is and that's a nice working all GM parts with the stamps on the gauges to prove it. It will have the factory wiring for the tach and buzzer with the buzzer not being the orignal buzzer but a Chevy car seat belt buzzer. The clock wiring isn't included but all it is, is a hot and a ground. You can contact me here if interested.

**TBONE1964** · 01-07-2014, 07:28 PM

Good luck with the sale Andy. It is a niece piece and I can say that first hand. I wish someone would find some speed warning parts in the stash somewhere. I am working on another one currently that also needs a gear. I am happy that you were able to get it going. It is touchy when you are working on some of this stuff when the parts are so hard to find.

Andy4639 · 01-07-2014, 08:07 PM

Quote:

Originally Posted by TBONE1964

Good luck with the sale Andy. It is a niece piece and I can say that first hand. I wish someone would find some speed warning parts in the stash somewhere. I am working on another one currently that also needs a gear. I am happy that you were able to get it going. It is touchy when you are working on some of this stuff when the parts are so hard to find.

Sent you a PM on how I fixed it. So it may help you out. Thanks again. I got busy putting it back together and listing it and forgot to PM you. It does have to be set right also. It starts at 25MPH and goes up if you set it where it goes below that it comes off the gear and I think that's what broke it to begin with the needle gear is a 3/4 gear so you have to get it center of the other one for it to work.
I think it's a fair price for what it is.

**jocko** · 01-07-2014, 08:13 PM

that thing is nice, all the right bells n whistles. good luck on the sale.

Andy4639 · 01-13-2014, 08:37 PM

You want find a better cluster with all these goodies in it and they are 100% GM parts. No aftermarket stuff.

Andy4639 · 01-18-2014, 05:52 PM

Somebody make me a good offer. I want this sold.
This is a like new cluster.

Andy4639 · 01-26-2014, 11:12 PM

Best offer over $600.00

Some one needs this orignal cluster for that orignal truck.

Andy4639 · 01-27-2014, 02:56 AM

TTT

Andy4639 · 01-28-2014, 07:52 PM

Don't let it get away!

You will regret not buying this!

Andy4639 · 02-02-2014, 10:07 PM

TTT

Where are all the orignal truck owners when you need them!

72junky · 02-08-2014, 01:07 PM

Here is a bump for you Andy! That is a really nice dash seeing it in person! Great meeting you today! Thanks for the manifolds! Big help!

72junky

Andy4639 · 02-10-2014, 08:13 AM

Quote:

Originally Posted by 72junky

Here is a bump for you Andy! That is a really nice dash seeing it in person! Great meeting you today! Thanks for the manifolds! Big help!

72junky

Thanks man. Be safe on the road this week and hope to see you and Billy next Saturday. Make me a offer!

Come on guys somebody needs this dash cluster. Make me a realistic offer and it just maybe will be yours. I don't need it anymore,

puppyluppy · 02-10-2014, 10:14 AM

Is that a OEM clock where the vacuum gauge usually is found? I have never seen a clock there before! Anyone who knows please tell me! A clock would be a much more useful option than the Vacuum gauge with is very short movement.
PuppyLuppy

**70shortfleet** · 02-10-2014, 01:25 PM

Quote:

Originally Posted by puppyluppy

Is that a OEM clock where the vacuum gauge usually is found? I have never seen a clock there before! Anyone who knows please tell me! A clock would be a much more useful option than the Vacuum gauge with is very short movement.
PuppyLuppy

Clock is not original, it has been added to the cluster

puppyluppy · 02-10-2014, 01:40 PM

The clock looks so perfect! Does it have any identifier on it? I saw the back.

Thank you for taking time to reply!

You are just like the other 9000 all very nice and helpful people I have met here!

Andy4639 · 02-10-2014, 06:48 PM

The clock if you read the orignal post I said came out of a later model truck. it's a GM quarts clock and it does work. Is it orignal no as stated also. Yes it's more useful than a air brake vacum gauge that tells you nothing while driving except you have vacum which if you didn't the truck wouldn't run!

Andy4639 · 02-12-2014, 07:09 PM

OK some one needs this! Just need to make a offer. These don't show up that often and when they do most are never complete. I want to help someone out that understands these dashes ar not the everyday dash. If you know your trucks then you should know the price is as good as it can be. This isn't a LMC dash.
The clock is a nice touch I think for this setup. It works and is much more useful than a vacum gauge.
Vacum gauges weren't a option on 1/2 tons either.

**undertaker72** · 02-13-2014, 10:36 PM

pm sent

01-07-2014, 06:13 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Complete Cluster Ok guy's here is a chance to get the best of the best. This is 100% Chevy truck cluster. No it's not perfect but... You are getting a completely redone by member TBONE1964 stock chevy dash with Tach, speed warning, clock, and all the other working gauges. All gauges are Chevy parts no aftermarkets. The cluster was sent to TBONE1964 to have all new decals installed on the Tach, speedo. This cluster is 100% working GM stuff. I collected all the parts myself over the past 20 years and it was in my truck up until last summer. I want to be up front about this because it's a lot of money to spend but if you buy it you know what you have. 1 issue and I think I have it fixed. The speed warning plastic gear that the cable attached to was broke on the speedo. TBONE1964 said he thought he had it fixed but it broke again the first time I tried it. Not his fault by no means it's plastic, so what I did was drill and ran a all threaded rod to join the 2 peices and so far it seems to be holding together. This is the only thing I can say that is are was wrong with it. So anyway the big question...how much! I think for what I have it's worth a price of $850.00 + shipping, LMC has the tach dash for $600.00 something so this to me is a bargin. The cluster is a nice peice but it's not perfect nor is it a orignal cluster so don't talk about what it should be, it's what it is and that's a nice working all GM parts with the stamps on the gauges to prove it. It will have the factory wiring for the tach and buzzer with the buzzer not being the orignal buzzer but a Chevy car seat belt buzzer. The clock wiring isn't included but all it is, is a hot and a ground. You can contact me here if interested. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-07-2014, 07:28 PM	#2
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Complete Cluster Good luck with the sale Andy. It is a niece piece and I can say that first hand. I wish someone would find some speed warning parts in the stash somewhere. I am working on another one currently that also needs a gear. I am happy that you were able to get it going. It is touchy when you are working on some of this stuff when the parts are so hard to find. __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

01-07-2014, 08:13 PM	#4
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,938	Re: Complete Cluster that thing is nice, all the right bells n whistles. good luck on the sale.

01-13-2014, 08:37 PM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Complete Cluster You want find a better cluster with all these goodies in it and they are 100% GM parts. No aftermarket stuff. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-18-2014, 05:52 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Complete Cluster Somebody make me a good offer. I want this sold. This is a like new cluster. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-26-2014, 11:12 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Complete Cluster Best offer over $600.00 Some one needs this orignal cluster for that orignal truck. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-27-2014, 02:56 AM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Complete Cluster TTT __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-28-2014, 07:52 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Complete Cluster Don't let it get away! You will regret not buying this! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-02-2014, 10:07 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Complete Cluster TTT Where are all the orignal truck owners when you need them! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-08-2014, 01:07 PM	#11
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: Complete Cluster Here is a bump for you Andy! That is a really nice dash seeing it in person! Great meeting you today! Thanks for the manifolds! Big help! 72junky __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post

02-10-2014, 10:14 AM	#13
puppyluppy Registered User Join Date: Aug 2011 Location: macon ga Posts: 123	Re: Complete Cluster Is that a OEM clock where the vacuum gauge usually is found? I have never seen a clock there before! Anyone who knows please tell me! A clock would be a much more useful option than the Vacuum gauge with is very short movement. PuppyLuppy

02-10-2014, 01:40 PM	#15
puppyluppy Registered User Join Date: Aug 2011 Location: macon ga Posts: 123	Re: Complete Cluster The clock looks so perfect! Does it have any identifier on it? I saw the back. Thank you for taking time to reply! You are just like the other 9000 all very nice and helpful people I have met here!

02-10-2014, 06:48 PM	#16
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Complete Cluster The clock if you read the orignal post I said came out of a later model truck. it's a GM quarts clock and it does work. Is it orignal no as stated also. Yes it's more useful than a air brake vacum gauge that tells you nothing while driving except you have vacum which if you didn't the truck wouldn't run! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-12-2014, 07:09 PM	#17
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Complete Cluster OK some one needs this! Just need to make a offer. These don't show up that often and when they do most are never complete. I want to help someone out that understands these dashes ar not the everyday dash. If you know your trucks then you should know the price is as good as it can be. This isn't a LMC dash. The clock is a nice touch I think for this setup. It works and is much more useful than a vacum gauge. Vacum gauges weren't a option on 1/2 tons either. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-13-2014, 10:36 PM	#18
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Complete Cluster pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.