SD 1967 4x4 frame, Axles, T-Case, MT & Shafts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67 cst swb** · 01-30-2015, 11:35 AM

I have a 1967 4x4 truck.
cab is completely wasted, beat up and rusty. I can't even get the drivers door open.
front fenders and hood are not worth anything.
What is there:
Frame - longbox, box sides are gone, was a wood floor only a few crossmembers left
Transfer Case - including floor shifter
SMxxx manual transmission - whatever a 67 had
Rear Axle - leaf spring, I can check code if needed.
Front Axle - this is the type with lock in/lock out selector
Drive Shafts - both F & R
Leaf Springs - F & R

Make offer and come get it.

**jmader** · 01-30-2015, 12:32 PM

Title?

**67 cst swb** · 01-30-2015, 12:56 PM

Quote:

Originally Posted by jmader

Title?

Sorry, no.

cypressbog · 01-30-2015, 03:00 PM

If this truck had factory power assist steering I know a member looking for the set-up.

**67 cst swb** · 01-30-2015, 03:12 PM

Quote:

Originally Posted by cypressbog

If this truck had factory power assist steering I know a member looking for the set-up.

I don't think it does, but I will go look today.

57taskforce · 01-30-2015, 07:21 PM

Where is it located at?

**67 cst swb** · 01-31-2015, 10:16 AM

Rapid City, South Dakota

**67 cst swb** · 02-01-2015, 01:53 AM

Quote:

Originally Posted by cypressbog

If this truck had factory power assist steering I know a member looking for the set-up.

Well, I think it had it at one time, but steering box and everything is gone. Only things left are the drag link that goes all the way from left to right.

**67 cst swb** · 02-01-2015, 01:55 AM

It does have
HQ 12 10 W
code axle, so I think that would be a 3.73 and front axle I assume matches ratio-wise.

I did get a few pics if anyone wants me to text them.

Krex · 02-02-2015, 01:12 AM

Can you pm me some photos of frame

Duluth67 · 02-02-2015, 10:13 AM

I am interested in the Trans/t-case. Have you split the two? I need to replace my current SM420/Rockwell T221 as the trans output shaft and t-case input collar are severely worn. Thanks

**67 cst swb** · 02-02-2015, 11:03 AM

Quote:

Originally Posted by Krex

Can you pm me some photos of frame

I can text message you a few photos that I have. I am no longer near it to get specific pictures.
If you would like to PM me your cell number, I can text what I have.

**67 cst swb** · 02-02-2015, 11:07 AM

Quote:

Originally Posted by Duluth67

I am interested in the Trans/t-case. Have you split the two? I need to replace my current SM420/Rockwell T221 as the trans output shaft and t-case input collar are severely worn. Thanks

I have no idea on the condition of what I have. The MT and T-case are still together in the vehicle.

I have no problem selling the MT and T-case to you. But you will have to take everything. I will not separate.

Duluth67 · 02-02-2015, 06:06 PM

Could you clarify "will not separate"? I am interested in both, just want to know the condition of said shafts. Do you want to separate the running gear from the frame, and sell the trans/tcase combo sight-unseen?

**67 cst swb** · 02-02-2015, 06:45 PM

Quote:

Originally Posted by Duluth67

Could you clarify "will not separate"? I am interested in both, just want to know the condition of said shafts. Do you want to separate the running gear from the frame, and sell the trans/tcase combo sight-unseen?

I would prefer to sell the whole truck as is.
I would be happy to text message you pictures of what is there.
I have absolutely no luck getting images uploaded in here.

Duluth67 · 02-03-2015, 06:12 PM

I guess I live a little far to drive to SD. Thanks for the offer.

**67 cst swb** · 02-03-2015, 06:20 PM

Quote:

Originally Posted by Duluth67

I guess I live a little far to drive to SD. Thanks for the offer.

No problem and
Welcome to the board

Oh If I still have this come June and we go to Back to the 50's again.
Maybe I could deliver it that far for free delivery.

Duluth67 · 02-04-2015, 08:17 AM

Thanks 67

**pimpston65** · 03-19-2015, 06:20 AM

Quote:

Originally Posted by 67 cst swb

No problem and
Welcome to the board

Oh If I still have this come June and we go to Back to the 50's again.
Maybe I could deliver it that far for free delivery.

will you sale just the locking hubs? pics also pleas!!!

**67 cst swb** · 03-19-2015, 01:00 PM

My intention is to get the whole thing gone.
But, I guess I might consider it. I do have a pic I can text to you. PM me your cell number.

**pimpston65** · 03-19-2015, 01:31 PM

Quote:

Originally Posted by 67 cst swb

My intention is to get the whole thing gone.
But, I guess I might consider it. I do have a pic I can text to you. PM me your cell number.

PM sent

**67 cst swb** · 03-19-2015, 02:50 PM

pics sent in text msg

01-30-2015, 11:35 AM	#1
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	1967 4x4 frame, Axles, T-Case, MT & Shafts I have a 1967 4x4 truck. cab is completely wasted, beat up and rusty. I can't even get the drivers door open. front fenders and hood are not worth anything. What is there: Frame - longbox, box sides are gone, was a wood floor only a few crossmembers left Transfer Case - including floor shifter SMxxx manual transmission - whatever a 67 had Rear Axle - leaf spring, I can check code if needed. Front Axle - this is the type with lock in/lock out selector Drive Shafts - both F & R Leaf Springs - F & R Make offer and come get it. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 02-02-2015 at 11:14 AM.

01-30-2015, 12:32 PM	#2
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Title? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

01-30-2015, 03:00 PM	#4
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts If this truck had factory power assist steering I know a member looking for the set-up.

01-30-2015, 07:21 PM	#6
57taskforce All about them K’s Join Date: Jun 2014 Location: Farmington, New Mexico Posts: 6,265	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Where is it located at? __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's ‘87 IROC-Z all original 50K mile survivor TPI 305 IROC Blue ‘10 Camaro 2SS/RS Aqua Blue Metallic #93 -version 2.0

01-31-2015, 10:16 AM	#7
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Rapid City, South Dakota __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red

02-01-2015, 01:55 AM	#9
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts It does have HQ 12 10 W code axle, so I think that would be a 3.73 and front axle I assume matches ratio-wise. I did get a few pics if anyone wants me to text them. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red

02-02-2015, 01:12 AM	#10
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Can you pm me some photos of frame

02-02-2015, 10:13 AM	#11
Duluth67 Registered User Join Date: Jan 2015 Location: Duluth Posts: 42	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts I am interested in the Trans/t-case. Have you split the two? I need to replace my current SM420/Rockwell T221 as the trans output shaft and t-case input collar are severely worn. Thanks

02-02-2015, 06:06 PM	#14
Duluth67 Registered User Join Date: Jan 2015 Location: Duluth Posts: 42	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Could you clarify "will not separate"? I am interested in both, just want to know the condition of said shafts. Do you want to separate the running gear from the frame, and sell the trans/tcase combo sight-unseen?

02-03-2015, 06:12 PM	#16
Duluth67 Registered User Join Date: Jan 2015 Location: Duluth Posts: 42	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts I guess I live a little far to drive to SD. Thanks for the offer.

02-04-2015, 08:17 AM	#18
Duluth67 Registered User Join Date: Jan 2015 Location: Duluth Posts: 42	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts Thanks 67

03-19-2015, 01:00 PM	#20
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts My intention is to get the whole thing gone. But, I guess I might consider it. I do have a pic I can text to you. PM me your cell number. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red Last edited by 67 cst swb; 03-19-2015 at 01:10 PM.

03-19-2015, 02:50 PM	#22
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 4x4 frame, Axles, T-Case, MT & Shafts pics sent in text msg __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.