Is this piece available? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

In The Ten Ring · 07-12-2015, 09:33 PM

My original rubber channel that holds the wiring for the front end lights is hard and cracked. Is this piece available from the vendors on this site?

This is the rubber piece that runs along the top of the radiator core support and attaches to it with 5 (or is it 7?) tiny bolts.

**Tim Christian** · 07-12-2015, 09:36 PM

Yes it is available usually sold as a pair with the short one that goes on the firewall also.

**FirstOwner69** · 07-12-2015, 09:49 PM

Quote:

Originally Posted by Tim Christian

Yes it is available usually sold as a pair with the short one that goes on the firewall also.

X2

Commonly called a wire gutter.

ho70 · 07-12-2015, 11:55 PM

$20 bucks for the two pieces at classic industries (only catalogue I had close by)

swamp rat · 07-14-2015, 11:45 PM

Expect them to be pretty hard , flexable but they tend to not have a nice shape to them, maybe a heat gun would help straighten them out? Or maybe i just got a bad poorly stored set?

**71CHEVYSHORTBED402** · 07-15-2015, 12:03 AM

I picked up some gutters from Classic Heartbeat. One for the firewall, one for the radiator.

07-12-2015, 09:33 PM	#1
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Is this piece available? My original rubber channel that holds the wiring for the front end lights is hard and cracked. Is this piece available from the vendors on this site? This is the rubber piece that runs along the top of the radiator core support and attaches to it with 5 (or is it 7?) tiny bolts.

07-12-2015, 09:36 PM	#2
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: Is this piece available? Yes it is available usually sold as a pair with the short one that goes on the firewall also.

07-12-2015, 11:55 PM	#4
ho70 Registered User Join Date: Nov 2013 Location: Winnipeg, Mb Posts: 1,115	Re: Is this piece available? $20 bucks for the two pieces at classic industries (only catalogue I had close by)

07-14-2015, 11:45 PM	#5
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Is this piece available? Expect them to be pretty hard , flexable but they tend to not have a nice shape to them, maybe a heat gun would help straighten them out? Or maybe i just got a bad poorly stored set? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

07-15-2015, 12:03 AM	#6
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,187	Re: Is this piece available? I picked up some gutters from Classic Heartbeat. One for the firewall, one for the radiator. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.