Leveling chassis
1 Attachment(s)
I'm getting ready to cut c notches and do other chassis work on a bare frame. What points do you all use for leveling, are these spots good to use for front to back &side to side?
|
Re: Leveling chassis
Bump, anyone?
|
Re: Leveling chassis
Looks good. I like to use the bed mounts cause they're normally parallel to the frame.
|
Re: Leveling chassis
I always use the top of the frame. Check it in three places front, middle and back to ensure no twist.
Jimmy |
Re: Leveling chassis
Thanks guys, I'll do just that next week when I get back out in the garage.
|
Re: Leveling chassis
Quote:
When I built my chassis, I checked @ the front (as far up front as possible); near the center (between front & rear cab mounts), & @ the end of the rails. |
All times are GMT -4. The time now is 09:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com