The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Shifter linkage question (https://67-72chevytrucks.com/vboard/showthread.php?t=702744)

mctattooer

03-31-2016 09:33 PM

Shifter linkage question

Got new column with shifter truck has floor shifter wanna go to column. Engine is 327 2 speed powerglide. Anybody know what i need as far as linkages from tranny to colum?

ksshane

04-01-2016 07:48 AM

Re: Shifter linkage question

Bumping so hopefully someone with more experience can help you out.

Not the same problem but.... I had to find a missing part for my clutch linkage and found that LMC has some pretty good exploded diagrams in their online catalog. You might start there.
Once you know what your looking for then you can post in the wanted section and Im sure you can find a used complete linkage from someone that has done the reverse swap.

mctattooer

04-01-2016 07:58 AM

Re: Shifter linkage question

Quote:

Originally Posted by ksshane (Post 7543720)

Thank you

57larry

04-01-2016 11:28 AM

Re: Shifter linkage question

check out Kugel Komponents. they have what you need for linkage. I have it on 2 of my vehicles

mctattooer

04-01-2016 09:16 PM

Re: Shifter linkage question

Quote:

Originally Posted by 57larry (Post 7543912)

check out Kugel Komponents. they have what you need for linkage. I have it on 2 of my vehicles

Thanx but no luck says no power glide

Mike C

04-02-2016 11:36 AM

Re: Shifter linkage question

Lokar might work, check theirs out. If you ever plan to do an overdrive trans (I WOULD!) now might be the time as you are redoing linkages as well.

All times are GMT -4. The time now is 07:07 AM.