Door pins and bushings
 

Are they serviceable seperate from the hinges ? Or do I need new hinges? What about the door checks?
Thanks
Posted via Mobile Device

Re: Door pins and bushings
 

i dont know if anybody makes a kit a lot of people say the repops are not too good maybe somebody will chime in

Re: Door pins and bushings
 

you can change the pins and bushings in them any parts store has them

Re: Door pins and bushings
 

Im pretty sure the last set I got was from shucks in the help section..

Re: Door pins and bushings
 

You can replace bushings and pins with the hinges on the truck. Much easier. I heated the hinges a little with a propane torch and tapped out the pins with an air hammer. Supported the door with some jack stands.

Re: Door pins and bushings
 

Its just a bolt and a bushing. they all can be fixed. no offense but hinges are easy to fix. they make all kinds of bushings stock and oversized and pins to fit. or any shop can fab pins. give the size of your opening and we can fit the bushing for an off the shelf pin.

Re: Door pins and bushings
 

Auto zone and most parts stores have the pins n bushings. The friction door checks are a different story. No parts for those. A few have tried making something that worked. I have no idea if they were successful.

Re: Door pins and bushings
 

You can get the door hinges with the check built in but not seperate for around 30 dollars each