The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

big.l.a · 07-20-2002, 11:27 PM

Just Install Tilt In my 71. Anyone who is doing this upgrade
using a Tilt from a 70's to early 80's van. Make sure you have
the Back-up/neutral switch when you remove the column from
the Van. I pulled one from a 74 GMC STX. and the switch was
mounted on the side of the tranny(Get all the wiring and the linkage to just in case you need it From the tranny). That's if your have a T350 tranny.It will save you another trip to the bone yard. Also a good Web site Is Shane's 67-72 Chevy Page.

07-20-2002, 11:27 PM	#1
big.l.a Registered User Join Date: Jan 2002 Location: Allen, TX. USA Posts: 210	One for the Book On Tilt Install Just Install Tilt In my 71. Anyone who is doing this upgrade using a Tilt from a 70's to early 80's van. Make sure you have the Back-up/neutral switch when you remove the column from the Van. I pulled one from a 74 GMC STX. and the switch was mounted on the side of the tranny(Get all the wiring and the linkage to just in case you need it From the tranny). That's if your have a T350 tranny.It will save you another trip to the bone yard. Also a good Web site Is Shane's 67-72 Chevy Page. __________________ 71 C10 LWB With Edelbrock 7101& 1406 Carb Accel HEI Blue Print Accel 8.8 Wires Soon to have possi & 186 Camel hump heads Dropped 2-1/2F&4R Dynomax Headers Duals Flowtech Aftburners Tonneau Cover Frm 89 F150 79 Monte C