Quote:
Originally Posted by Alan's Classic
First I have a question. The bed parts that come from Mar-K are galvanized if I'm not mistaken. What do ya'll use to prep it for primer?
|
Alan, its been awhile since I did that, but since it is new, I would just wipe the panel down with a good wax and grease remover, let that dry and scuff with a red scotch brite pad, wipe down again and let dry then shoot 2 coats of DP90. After that, top coat as you prefer.
You want to scuff the surface of the galvanized to create a profile for the paint (DP90) to adhere properly. You do not want to remove all of the zinc coating, just as little as needed to get a good scuff so that the paint sticks.
Looking good as usual!!!!!