Quote:
Originally Posted by SCOTI
Not much progress as I'm trying to source parts which ultimately effect planning direction....
I picked up the aluminum material that will be used for re-positioning the rear axles center-line back approx 1.5". My plan was to utilize a solid piece of alum but the limited size & amount I needed rendered a significant jump in price. I decided to go w/what was readily available & used some 'drop' material from my local steel yard. One local metal supplier wanted $70+ for what I needed (which I had a few choice words for), so my steel yard let me scour through their alum scrap stack & these 2pcs (.500" x 3" x 21" total) cost me < $7. I'll have to stack them but it really won't impact their function....
|
Scoti - I thought that the Porterbuilt TA's moved the center line of the rear axle back that 1.5"? or am I missing something?? What about just moving the cross member back the required 1.5"?
On another note, can you get a measurement for me? I no longer have a stock rear end houseing. I need to know how far part the mounting pads on the axle are? A measurement from the center of the rear hole (for the u-bolt) to the center of the other rear hole and the same for the front holes would be helpful. Thanks in advance.