I spent sometime tonight putting them on to see how they fit. The passenger side fits good with no clearance issues to the frame rail or the motor mount frame brackets. I left the plastic bag they came in on this one to help avoid scratches for now.
The driver side header has an issue fitting the way I wanted. It looks like it will fit and clear every where except for the front tube hits the bracket for the motor mount.
![](http://i266.photobucket.com/albums/ii263/karlk91/Old%20Blue%202010/100_2650.jpg)
The rear most bolt is in the flange, but the front most bolt hole is about an inch off from lining up with the hole in the head. I will just make/modify the motor mount frame bracket to clear, but still bolt in the factory holes.
All in all, I am happy with them. They came with all the hardware and reducers and gaskets. The hardware is metric except for the header bolts, the threads are 3/8"-16, but the head is a small 10mm hex. No problem there. The reducers are nice and have a good polished finish, the flange and reducer flanges are cut on a cnc plasma and are both nice and think. Once I get the motor mount modfied, I will run the pipes on the driver side, hook up the shift linkage, and then redo the brake lines.