Did some more mocking up on my engine and trans. Ordered some 4 inch poly bushings but they wont be here until tomorrow. Some of the pics are for me to keep track.
![](http://i20.photobucket.com/albums/b248/Tinydb84/Mobile%20Uploads/20150712_131516.jpg)
Those pics were before I cut the trans tunnel out. Then I cut the tunnel out and mocked everything up.
![](http://i20.photobucket.com/albums/b248/Tinydb84/Mobile%20Uploads/20150712_163207.jpg)
This is where I am going to put the new mounts.
![](http://i20.photobucket.com/albums/b248/Tinydb84/Mobile%20Uploads/20150712_163746.jpg)
Nice tight clearance between the pan and crossmember.
![](http://i20.photobucket.com/albums/b248/Tinydb84/Mobile%20Uploads/20150712_163811.jpg)
Plenty of clearance with the trans
![](http://i20.photobucket.com/albums/b248/Tinydb84/Mobile%20Uploads/20150712_163314.jpg)
Didnt have enough hands to hold and take pics of the oil pan but it will clear the ground with almost an inch to spare.