Quote:
Originally Posted by RKS0069
This is great info! I'm going to pull the trigger on a NV4500 swap, now I just need to figure out if I can use my sm420 bell without the adapter.
|
Your bell housing would be the same as the one I used except that the front bearing retainer hole is the small (4-11/16") diameter instead of the 5-1/8" needed for the NV4500 transmission. You can either have yours bored out to 5-1/8" or find a bell housing from a truck with the SM465 manual transmission. (1968 up)
LockDoc