Quote:
Originally Posted by Smitz70
Cool. Thanks Lockdoc, for the quick reply. I dont know what that relay is for but if it is not for my fan I will not worry about it right now.
One more issue.. When I move the fan switch, I get 12v at high position, nothing on the other positions. Is this the resistor?
|
I would think so unless your new switch is faulty. There are 2 wire coils on the resistor board, see if one of them is broken. Gently pry the wiring plug off with a small screw driver, working from side to side. It takes a 5/16 nut driver to remove the two hex head screws
Leon.