1967 gmc custom seatbelt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chapster · 12-08-2021, 05:53 PM

Is there an aftermarket replacement for my seat belt buckle like in the added pic?

**special-K** · 12-09-2021, 05:59 AM

I don't know of any. That's not a '67 GMC buckle or the '68-up one either. Vans used the same buckles as 68-72s (75s?), so must be newer than that.

**too much stuff** · 12-09-2021, 08:59 AM

That looks like a 66 buckle pictured.

**special-K** · 12-09-2021, 01:36 PM

I guess I never saw a deluxe belt buckle before, or a '66. I've only seen the all metal ones like the Chevys, w/o the bowtie. The other end is bigger like the 68-72s

**chev-obsession** · 12-09-2021, 08:54 PM

Quote:

Originally Posted by too much stuff

That looks like a 66 buckle pictured.

x2

The GMC seat belts for 67 that I’ve seen are a chrome version of the 67 Chevy. No GMC logo, they almost look generic or something you would buy as a replacement. Im sure that someone will chime in.

**special-K** · 12-10-2021, 09:35 AM

Would the male end have the large horizontal slot that 68-75s have, meaning only '67 had the smaller vertical slot? I'm just trying to learn something here. I feel the logo looks later and so does the textured cover. Looks like the spongy vinyl/rubber like used on '73-up knobs and steering wheels

Small picture, but here you see the small vertical slot. These were described as 64-66 deluxe.

chapster · 12-12-2021, 07:55 PM

This is a Canadian truck, wonder if that matters any?

**dagnabbitt** · 12-13-2021, 11:58 AM

Quote:

Originally Posted by chapster

This is a Canadian truck, wonder if that matters any?

It is possible. Oshawa might be the factory that had old parts the longest and received new parts last. I have had some Canadian trucks that have led me to believe that is the case, anyway.

I wonder if it is a super early build-date 67, there were a lot of little things from 66 that ended up on trucks in 67 all over North America. I get the build sheets from GM Heritage for all my (Canadian) trucks, you should check that out.

12-08-2021, 05:53 PM	#1
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	1967 gmc custom seatbelt Is there an aftermarket replacement for my seat belt buckle like in the added pic? Attached Images __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

12-09-2021, 05:59 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: 1967 gmc custom seatbelt I don't know of any. That's not a '67 GMC buckle or the '68-up one either. Vans used the same buckles as 68-72s (75s?), so must be newer than that. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-09-2021, 08:59 AM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: 1967 gmc custom seatbelt That looks like a 66 buckle pictured. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-09-2021, 01:36 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: 1967 gmc custom seatbelt I guess I never saw a deluxe belt buckle before, or a '66. I've only seen the all metal ones like the Chevys, w/o the bowtie. The other end is bigger like the 68-72s __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 12-10-2021 at 09:23 AM.

12-10-2021, 09:35 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: 1967 gmc custom seatbelt Would the male end have the large horizontal slot that 68-75s have, meaning only '67 had the smaller vertical slot? I'm just trying to learn something here. I feel the logo looks later and so does the textured cover. Looks like the spongy vinyl/rubber like used on '73-up knobs and steering wheels Small picture, but here you see the small vertical slot. These were described as 64-66 deluxe. Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-12-2021, 07:55 PM	#7
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: 1967 gmc custom seatbelt This is a Canadian truck, wonder if that matters any? __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.