Does this look like the correct inner fender wells?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**desert-rat** · 04-27-2021, 03:21 PM

1969 GMC 3/4 2WD.
Went on a shopping spree this weekend with my over time money.
Looking over the parts I bought. Got most of what I needed this time around, but they only had the passenger side fender well. I don't have the old ones to match up with. Also, besides the fender, where else does this mount to?? Thanks.

my67c20 · 04-27-2021, 04:40 PM

Yes, that is correct. 2 holes on top mount to fender, square hole is to frame, holes in front to core support and holes around wheel arc go to fender. If this was drivers it would have some mounting holes for an L-shaped bar to mount around steering shaft

sick472 · 04-27-2021, 04:50 PM

I believe my67 meant to say the the square hole is where it mounts to the cab frame. I'm not even sure what is is called. Cab Sub Frame, maybe?

**desert-rat** · 04-27-2021, 06:09 PM

Well that's a relief to know that I got the correct fender. Gotta get the driver side in 2 weeks. Its on back order. I'm over here trying to line up the holes to the frame. Lol. I forgot it doesn't mount that way. Thanks for the replies.

**LockDoc** · 04-27-2021, 09:39 PM

-
This is what the bolts look like that fit into the square holes and into the cab brace. The washers are about 2 1/2" in diameter.

LockDoc

04-27-2021, 03:21 PM	#1
desert-rat Senior Member Join Date: Jan 2013 Location: 3,018 feet above the SoCal/Mojave Desert region. Posts: 357	Does this look like the correct inner fender wells?? 1969 GMC 3/4 2WD. Went on a shopping spree this weekend with my over time money. Looking over the parts I bought. Got most of what I needed this time around, but they only had the passenger side fender well. I don't have the old ones to match up with. Also, besides the fender, where else does this mount to?? Thanks. Attached Images Last edited by desert-rat; 04-27-2021 at 06:11 PM.

04-27-2021, 04:40 PM	#2
my67c20 Registered User Join Date: Jun 2002 Location: Tucson AZ by way of WI & CA Posts: 507	Re: Does this look like the correct inner fender wells?? Yes, that is correct. 2 holes on top mount to fender, square hole is to frame, holes in front to core support and holes around wheel arc go to fender. If this was drivers it would have some mounting holes for an L-shaped bar to mount around steering shaft

04-27-2021, 04:50 PM	#3
sick472 Registered User Join Date: Jul 2015 Location: Sedalia Mo. Posts: 1,130	Re: Does this look like the correct inner fender wells?? I believe my67 meant to say the the square hole is where it mounts to the cab frame. I'm not even sure what is is called. Cab Sub Frame, maybe? __________________ He who is without oil shall throw the first rod. Compressions 8.7:1 1972 C10 1976 C10 (parts truck) 1985 K20

04-27-2021, 06:09 PM	#4
desert-rat Senior Member Join Date: Jan 2013 Location: 3,018 feet above the SoCal/Mojave Desert region. Posts: 357	Re: Does this look like the correct inner fender wells?? Well that's a relief to know that I got the correct fender. Gotta get the driver side in 2 weeks. Its on back order. I'm over here trying to line up the holes to the frame. Lol. I forgot it doesn't mount that way. Thanks for the replies.

04-27-2021, 09:39 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,346	Re: Does this look like the correct inner fender wells?? - This is what the bolts look like that fit into the square holes and into the cab brace. The washers are about 2 1/2" in diameter. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.