Re: The Mother Trucker.. FX Race Cars, Porterbuilt, Dyess Designs 68 coil over build
Its update time again. The frame is back from sandblaster and the reassembly begins. This time the welding of all the holes, and the boxing of the inside of the frame will begin. There will be tubular braces added after the plates are added to the inside frame rails. The c-notches are stitch welded as well. I spent a few hours drilling holes (lightening) some of the front end components ,shock mounts, and inner truss . I will drill the crossmember and the inner frame plating when its done. I did get the front inner fenders from US Body Source. WOW Eric really hooked me up with these!!! Also board member "Putter" did my instrument cluster , Thanks bud you did a nice job!!! My cab is being sandblasted and so the finish metal work will begin on it soon.
On a side note check out the Texas Mile worlds fastest camaro with Joe Honeycutt from a few weeks ago. Robert and I both worked for John Harrison who did the cage install on this car. It has been 263+mph. It was barrell rolled on fire at 220 a few weeks ago. The cage did its job!!!!!!!!!
|