bag mouting questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gunkis84 · 01-10-2008, 04:33 PM

hey i got my rear bag setup today and was wondering how the bag mounts to the stock location.. the stock location has a one hole design and the actual bag has 3 holes for mounting.. what do i do? i have plates that came with the bag.. and what i was thinking that maybe i offset the bag off the trailing arm to allow for the screws to go into the bag.. if that makes any sence.. but pics of peoples installs would be great.. thanks

ps got this setup from kp components the bags i have for the rear are slam specialties

Bagged Nissan · 01-10-2008, 04:40 PM

slams give you three holes so they mount in both firestone and airlift patterns. You will stock a bolt through the 1 hole of your trailing arm, into the center hole in the slam bag. If you offset the bag, it will twist the stock trailing arm and twist it.

gunkis84 · 01-10-2008, 07:01 PM

gotcha makes alot of sence!! i really appreciate it

gringoloco · 01-10-2008, 07:30 PM

You can also drill for the other two holes on the trailing arms if you want to. Most people just run one long Grade 8 bolt through the arm (me included). Check out MrShelly's thread in the FAQ for pics of bags in the stock mounting location.

gunkis84 · 01-11-2008, 03:48 AM

k thanks

01-10-2008, 04:33 PM	#1
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	bag mouting questions hey i got my rear bag setup today and was wondering how the bag mounts to the stock location.. the stock location has a one hole design and the actual bag has 3 holes for mounting.. what do i do? i have plates that came with the bag.. and what i was thinking that maybe i offset the bag off the trailing arm to allow for the screws to go into the bag.. if that makes any sence.. but pics of peoples installs would be great.. thanks ps got this setup from kp components the bags i have for the rear are slam specialties

01-10-2008, 04:40 PM	#2
Bagged Nissan the fab shack Join Date: Feb 2007 Location: hell Posts: 66	Re: bag mouting questions slams give you three holes so they mount in both firestone and airlift patterns. You will stock a bolt through the 1 hole of your trailing arm, into the center hole in the slam bag. If you offset the bag, it will twist the stock trailing arm and twist it.

01-10-2008, 07:01 PM	#3
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: bag mouting questions gotcha makes alot of sence!! i really appreciate it

01-10-2008, 07:30 PM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: bag mouting questions You can also drill for the other two holes on the trailing arms if you want to. Most people just run one long Grade 8 bolt through the arm (me included). Check out MrShelly's thread in the FAQ for pics of bags in the stock mounting location. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-10-2008 at 07:32 PM.

01-11-2008, 03:48 AM	#5
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: bag mouting questions k thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.