|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-25-2011, 01:51 PM
|
#1 |
|
Registered User
Join Date: Aug 2010
Location: North Wales, PA
Posts: 82
|
Straight 6 Tins... Oil Pan, Valve Cover, etc.
Hey I have a 68' Chevy C10, with a 250 inline 6 that I'm rebuilding right now. I found all my internal parts, pistons, rings, cam, and what not.
My problem is I can't find a stock Oil Pan or Valve Cover anywhere... PLEASE HELP |
|
|
|
12-25-2011, 02:00 PM
|
#2 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Straight 6 Tins... Oil Pan, Valve Cover, etc.
As far as I know you only have 2 choices.Either used or aftermarket.There will be no stock appearing aftermarket ones and so if that's the direction you want to go,you will need to find good used ones or at least some you can straighten. There are a few choices out there for aftermarketbut you can usually buy smallblock sets cheaper.Good luck with your build.
BTW 230,and IIRC the other 6 cyl tin will fit,except for 292.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
12-25-2011, 03:37 PM
|
#3 |
|
Registered User
Join Date: Feb 2009
Location: stockton ca.
Posts: 502
|
Re: Straight 6 Tins... Oil Pan, Valve Cover, etc.
I have a brand new repo chrome valve cover I wont use if ur interested...but try eBay used good used factory stuff..
Posted via Mobile Device
__________________
94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ |__\__ ..........|__(O)______(O)] ........................ |
|
|
|
|
12-25-2011, 03:50 PM
|
#4 |
|
Registered User
Join Date: Sep 2011
Location: Eau Claire, Wisconsin
Posts: 415
|
Re: Straight 6 Tins... Oil Pan, Valve Cover, etc.
I have a nice set on my inline 250 in my 68 c10. I am going to part out the truck as the frame broke. I dont know what kind of price you were thinking as the motor runs great, but if i got a decent price I would pull whatever motor parts you need off of it. If interested PM me.Thanks
__________________
1969 shortbed c/10 1998 GMC sierra |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
