Wanted: Junk inner fenders in the K.C. area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammed67 · 09-29-2003, 11:34 AM

I'm looking for some junk (rusty, dented) inner fenders. If anybody in the Kansas City area has some they'd like to get rid of, let me know.

Thanks,

Jason

teeitup · 09-29-2003, 12:29 PM

Jason, I think I have a few around here, I'll check. Randy

*Shane* · 09-29-2003, 12:32 PM

I am not in your area, but I have a set that you can have. We just need to figure out shipping.

nu2-72 · 09-29-2003, 05:48 PM

I am sure I have some. You are joking though, right? Junky inners in the KC area? Second saltiest area behind Bonneville. Nothing but rustfree stuff here. LOL Let me know, I got lots of scrap you can have.

Slammed67 · 09-29-2003, 05:57 PM

Yeah, I'm going against the status quo and am going to buy up all the rusty sheet metal. Then when all the rust free stuff is gone, I'll be sitting on a gold mine!!

Just kidding of course. I'm looking for a set to "experiment" with and if I use some nice rust free ones, CPNE might get upset

How far are you from K.C.?

teeitup · 09-29-2003, 07:47 PM

I looked Jason, I got 3 of them around here you can have too, if not they are going to scrap soon. Randy

nu2-72 · 09-29-2003, 07:54 PM

Depends where you are. I can be at the airport in 45 minutes. Straight up 29 past St. Joseph.
Randy is about 45 minutes from the Speedway. That about right Randy? I think that is about how long it took to meet 71Stepside and Lost Wages.

**68 Stepside** · 09-29-2003, 08:06 PM

Uh oh, sounds like Slammed is preparing to break out everyone's favorite sheetmetal "artist", BozAll

teeitup · 09-29-2003, 08:08 PM

Thats pretty close Kevin, it might be easier for Jason to get to your place, he's on the east side.

dinnut · 09-30-2003, 12:11 AM

dont tell cpne about this thread... shhhhhh

Ruckus · 09-30-2003, 12:38 AM

I've got a couple here in Lawrence you can have. I sure don't need 'em!
Eric

rolnlow · 10-04-2003, 08:01 AM

I think OI have a couple in independence call me 591-0256

Ronnie

nu2-72 · 10-04-2003, 10:11 AM

Ronnie, I have your old ones.
Jason, do you want them or can I throw them away? RSVP

Slammed67 · 10-04-2003, 01:14 PM

Eric, let me check round at the local junkyards first and if I can't find some, I'll take yours...... you are probably the closest to me.

nu2-72 · 10-05-2003, 12:44 AM

Gone

rolnlow · 10-05-2003, 12:54 PM

jay, I do have 2 of them. I am in independence, mo just real close to you.

Slammed67 · 10-06-2003, 10:48 PM

rolnlow hooked me up. Thanks!

rambler · 10-07-2003, 11:47 AM

Now what are you going to do with them????

Slammed67 · 10-07-2003, 12:04 PM

I'm going to cut them up into little pieces and make Christmas ornaments for CPNE

But all kidding aside, I’m going to try and modify them (raise them up) for more tire clearance when my air suspension is lowered all the way.

**CPNE** · 10-07-2003, 12:55 PM

Quote:

Originally posted by Slammed67
I'm going to cut them up into little pieces and make Christmas ornaments for CPNE

But all kidding aside, I’m going to try and modify them (raise them up) for more tire clearance when my air suspension is lowered all the way.

I'm Jewish, but your heart is in the right place.

I understand that the dash radio cutouts can be folded and shaped into Dradles (sp) with minimal effort.

09-29-2003, 11:34 AM	#1
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Wanted: Junk inner fenders in the K.C. area I'm looking for some junk (rusty, dented) inner fenders. If anybody in the Kansas City area has some they'd like to get rid of, let me know. Thanks, Jason __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

09-29-2003, 12:29 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Jason, I think I have a few around here, I'll check. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-29-2003, 05:48 PM	#4
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I am sure I have some. You are joking though, right? Junky inners in the KC area? Second saltiest area behind Bonneville. Nothing but rustfree stuff here. LOL Let me know, I got lots of scrap you can have. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

09-29-2003, 05:57 PM	#5
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Yeah, I'm going against the status quo and am going to buy up all the rusty sheet metal. Then when all the rust free stuff is gone, I'll be sitting on a gold mine!! Just kidding of course. I'm looking for a set to "experiment" with and if I use some nice rust free ones, CPNE might get upset How far are you from K.C.? __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

09-29-2003, 07:47 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I looked Jason, I got 3 of them around here you can have too, if not they are going to scrap soon. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-29-2003, 12:32 PM	#3
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	I am not in your area, but I have a set that you can have. We just need to figure out shipping.

09-29-2003, 07:54 PM	#7
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Depends where you are. I can be at the airport in 45 minutes. Straight up 29 past St. Joseph. Randy is about 45 minutes from the Speedway. That about right Randy? I think that is about how long it took to meet 71Stepside and Lost Wages. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

09-29-2003, 08:06 PM	#8
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Uh oh, sounds like Slammed is preparing to break out everyone's favorite sheetmetal "artist", BozAll Attached Images __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

09-29-2003, 08:08 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Thats pretty close Kevin, it might be easier for Jason to get to your place, he's on the east side. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-30-2003, 12:11 AM	#10
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	dont tell cpne about this thread... shhhhhh __________________ 70 longbed 496/th400/Ford 9"

09-30-2003, 12:38 AM	#11
Ruckus Registered User Join Date: Jul 2003 Location: Lawrence, KS Posts: 127	I've got a couple here in Lawrence you can have. I sure don't need 'em! Eric __________________ 1971 GMC LWB 350/350--SOLD 1970 Chevy LWB 350/350--SOLD 2000 VW VR6!

10-04-2003, 08:01 AM	#12
rolnlow Registered User Join Date: Nov 2001 Location: independence mo usa Posts: 333	I think OI have a couple in independence call me 591-0256 Ronnie

10-04-2003, 10:11 AM	#13
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Ronnie, I have your old ones. Jason, do you want them or can I throw them away? RSVP __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

10-04-2003, 01:14 PM	#14
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Eric, let me check round at the local junkyards first and if I can't find some, I'll take yours...... you are probably the closest to me. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

10-05-2003, 12:44 AM	#15
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Gone __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide



Register or Log In To remove these advertisements.

10-05-2003, 12:54 PM	#16
rolnlow Registered User Join Date: Nov 2001 Location: independence mo usa Posts: 333	jay, I do have 2 of them. I am in independence, mo just real close to you.

10-06-2003, 10:48 PM	#17
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	rolnlow hooked me up. Thanks! __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

10-07-2003, 11:47 AM	#18
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Now what are you going to do with them???? __________________ No matter where you are..... There you are... Buckaroo Banzi

10-07-2003, 12:04 PM	#19
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	I'm going to cut them up into little pieces and make Christmas ornaments for CPNE But all kidding aside, I’m going to try and modify them (raise them up) for more tire clearance when my air suspension is lowered all the way. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

Register or Log In To remove these advertisements.