|
06-29-2014, 02:43 PM
|
#1 |
|
Registered User
Join Date: Dec 2008
Location: NW-Ohio
Posts: 2,525
|
Mayday, Pimp Down
Mayday, Pimp Down, went out for a drive the other night, all was well, drove around and back home just fine. Go to take it out last night and the engine sounds bad. I need Dr Car Stat!!!
https://www.youtube.com/watch?v=5Bw6G1XZreg |
|
|
|
06-29-2014, 05:43 PM
|
#2 |
|
Registered User
Join Date: Dec 2008
Location: NW-Ohio
Posts: 2,525
|
Re: Mayday, Pimp Down
so hard the fathom how it ran fine the night before, not a sign of trouble, then next day a death rattle.
|
|
|
|
|
06-30-2014, 02:15 PM
|
#3 |
|
Registered User
Join Date: Dec 2008
Location: NW-Ohio
Posts: 2,525
|
Re: Mayday, Pimp Down
not fuel pump
valve cover off and nothing looks or operates wrong, yet I didn't see oil come out the push rods. But they all do spin. hooked up gauge, quickly shoots to 30-40psi on start. Has to be oil not getting to lifters buy why suddenly with no sign....... |
|
|
|
|
07-18-2014, 07:39 PM
|
#4 |
|
Registered User
Join Date: Dec 2008
Location: NW-Ohio
Posts: 2,525
|
Re: Mayday, Pimp Down
giant blob of small chunks of hard carbon pooled right at the pick up and stuck in it.
new melling pick up with 5/8 tube coming...... funny it is a clean engine, no sludge, how many years did it took to build up enough? |
|
|
|
|
07-22-2014, 09:46 PM
|
#5 |
|
Registered User
Join Date: Feb 2007
Location: Marana, Arizona
Posts: 3,416
|
Re: Mayday, Pimp Down
In the 5.0 for the better half's Volvo. Its was super clean in the pan but had a huge "chunk" of sludge in the LH valve cover. Because the exhaust manifold rose up on that side slowly cooking the oil? Maybe something like that happened in a oil passage in your engine? Just a thought.
__________________
"I feel the need for speed!"... as soon as I am done with my nap. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
