My 57 Pro Street - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1Bad62Pro/Street · 03-29-2012, 07:03 PM

Looking Good!
I ran across this several weeks ago and forgot to post it on here when you started to mock it up.
http://www.thehollisterroadcompany.c..._Firewall.html

hotrod1 · 03-29-2012, 08:39 PM

Kim:

That looks great. How did you bend the radius on the straight piece? What gauge did you use?

Is that piece overlapped on the firewall? If so, will you just fill it?

ChuckDriver · 03-29-2012, 08:44 PM

Looking good!

Kim57 · 03-29-2012, 09:29 PM

Quote:

Originally Posted by 1Bad62Pro/Street

Looking Good!
I ran across this several weeks ago and forgot to post it on here when you started to mock it up.
http://www.thehollisterroadcompany.c..._Firewall.html

I've seen that one also but after replacing the whole firewall once I didn't want to do it again. I also like the more rounded look.

Quote:

Originally Posted by hotrod1

Kim:

That looks great. How did you bend the radius on the straight piece? What gauge did you use?

Is that piece overlapped on the firewall? If so, will you just fill it?

I had the radius done at a steel supplier. The rest of the bends I did in the garage with a shrinker/stretcher.
I used 16 gauge.
The piece is cut to fit flush with no overlap.

Quote:

Originally Posted by ChuckDriver

Looking good!

Thanks.

Kim

Tri5Nerd · 03-29-2012, 09:38 PM

Once again, great job on the firewall.

Tri5

1Bad62Pro/Street · 03-29-2012, 09:56 PM

Yep, looks real good.
All the fab work is sweet.
What flavor of headers are you gonna run?
Looks like you have enough clearance for some long tube headers.
Well it want be long and you will be ready to you fire that bad boy up!
Hey, Look into Joe Gibbs oil for GM LS engines.

http://www.youtube.com/watch?v=1nz6Mzo3alQ

LS30 - YouTube

Tri5Nerd · 03-29-2012, 11:25 PM

Why spend so much when you can get the german Castro Synth 0-30 for half the price at AutoZone, lots of talk about that on the LSx boards. Make sure it's the bottle that says bottled or made in Germany.

Tri5

Kim57 · 03-30-2012, 12:22 AM

Quote:

Originally Posted by Tri5Nerd

Once again, great job on the firewall.

Tri5

Thanks.

Quote:

Originally Posted by 1Bad62Pro/Street

Yep, looks real good.
All the fab work is sweet.
What flavor of headers are you gonna run?
Looks like you have enough clearance for some long tube headers.
Well it want be long and you will be ready to you fire that bad boy up!
Hey, Look into Joe Gibbs oil for GM LS engines.
http://www.youtube.com/watch?v=1nz6Mzo3alQ
LS30 - YouTube

Right now I'm looking at some Sanderson with 1-3/4 inch primaries.
I can get them in the $400 range.
Not sure if I want to pay the extra cost of the long tubes at this time.

Quote:

Originally Posted by Tri5Nerd

Why spend so much when you can get the german Castro Synth 0-30 for half the price at AutoZone, lots of talk about that on the LSx boards. Make sure it's the bottle that says bottled or made in Germany.

Tri5

I didn't now they had made specifically in Germany. I plan on running a syn oil so I'll have to check it out.
Kim

Rods57 · 03-30-2012, 12:26 AM

looks great, how far back is the piece you built?

Kim57 · 03-30-2012, 12:31 AM

Quote:

Originally Posted by Rods57

looks great, how far back is the piece you built?

Thanks.
It's set back 3"s. It gives me about an inch of clearance behind the intake.
Kim

Kabwe · 03-30-2012, 12:57 PM

Kim,

Once again you did a great job on that firewall everything is looking top notch.

jimig1 · 03-30-2012, 01:12 PM

Looking good! I like seeing others progress. It helps me get going. You have mad fabrication skils.

Kim57 · 03-30-2012, 11:20 PM

Quote:

Originally Posted by Kabwe

Kim,

Once again you did a great job on that firewall everything is looking top notch.

Thanks Bam.

Quote:

Originally Posted by jimig1

Looking good! I like seeing others progress. It helps me get going. You have mad fabrication skils.

Thanks.
I'm like you I get inspiration from seeing what others on the board do.
Kim

drivea55 · 04-01-2012, 03:20 PM

Firewall is looking great!

Those curves sure are eye appealing!

Brian
Posted via Mobile Device

Kim57 · 04-01-2012, 07:11 PM

Quote:

Originally Posted by drivea55

Firewall is looking great!

Those curves sure are eye appealing!

Brian
Posted via Mobile Device

Thanks.
Kim

_Ogre · 04-01-2012, 09:07 PM

that is nice work kim

i had to enlarge the stock recess to get my hei dist to fit
i've seen part of a wheel barrow tub welded in there too

Kim57 · 04-02-2012, 12:21 AM

Quote:

Originally Posted by _Ogre

that is nice work kim

i had to enlarge the stock recess to get my hei dist to fit
i've seen part of a wheel barrow tub welded in there too

Thanks Ogre.
I've seen the wheel barrow done also and thought about it for a while before doing what I did.
Kim

Daze57 · 04-02-2012, 01:54 AM

excellent work kim - you really have it workin out nicely !

1959Chev · 04-02-2012, 02:39 PM

Kim,
I gotta say this is one of the slickest builds on the forum. You are a metal magician. I've gotten a lot of ideas from your build

Kim57 · 04-04-2012, 12:16 PM

Quote:

Originally Posted by 1959Chev

Kim,
I gotta say this is one of the slickest builds on the forum. You are a metal magician. I've gotten a lot of ideas from your build

Thanks.
I get a lot of inspiration and ideas from the guys on the board also.
Kim

Kim57 · 04-04-2012, 12:19 PM

A little up date.
I needed to make my trans hump so here's what I did.
I made a frame out of some round stock and then made some templates out of heavy card stock.
Kim

Kim57 · 04-04-2012, 12:22 PM

A little welding, bending and grinding and I have something that will be hidden by a center console and carpet.
I'm waiting on some headers to see if they're going to fit before I get the cab back off to finish up the firewall.
Kim

ambryatim · 04-04-2012, 12:37 PM

Very Nice!!! Keep up the excellent work!

hotrod1 · 04-04-2012, 12:43 PM

That's nice! When can u start on mine?

Kim57 · 04-04-2012, 03:58 PM

Quote:

Originally Posted by ambryatim

Very Nice!!! Keep up the excellent work!

Thanks.

Quote:

Originally Posted by hotrod1

That's nice! When can u start on mine?

Thanks. i can start yours on the second Tuesday of next week.
Kim

03-29-2012, 07:03 PM	#526
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: My 57 Pro Street Looking Good! I ran across this several weeks ago and forgot to post it on here when you started to mock it up. http://www.thehollisterroadcompany.c..._Firewall.html __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

03-29-2012, 08:39 PM	#527
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Re: My 57 Pro Street Kim: That looks great. How did you bend the radius on the straight piece? What gauge did you use? Is that piece overlapped on the firewall? If so, will you just fill it?

03-29-2012, 08:44 PM	#528
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,622	Re: My 57 Pro Street Looking good! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

03-29-2012, 09:38 PM	#530
Tri5Nerd Tripple Five Fanatic Join Date: Sep 2006 Location: USA Posts: 658	Re: My 57 Pro Street Once again, great job on the firewall. Tri5 __________________ 1955 Chevy Stepside/LS1 drive train http://67-72chevytrucks.com/vboard/s...d.php?t=371513

03-29-2012, 11:25 PM	#532
Tri5Nerd Tripple Five Fanatic Join Date: Sep 2006 Location: USA Posts: 658	Re: My 57 Pro Street Why spend so much when you can get the german Castro Synth 0-30 for half the price at AutoZone, lots of talk about that on the LSx boards. Make sure it's the bottle that says bottled or made in Germany. Tri5 __________________ 1955 Chevy Stepside/LS1 drive train http://67-72chevytrucks.com/vboard/s...d.php?t=371513

03-30-2012, 12:26 AM	#534
Rods57 Registered User Join Date: Feb 2011 Location: Boise, Idaho Posts: 610	Re: My 57 Pro Street looks great, how far back is the piece you built? __________________ My 57 Build http://67-72chevytrucks.com/vboard/s...d.php?t=471289

03-30-2012, 12:57 PM	#536
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: My 57 Pro Street Kim, Once again you did a great job on that firewall everything is looking top notch.

03-30-2012, 01:12 PM	#537
jimig1 Registered User Join Date: Jul 2010 Location: Elk River, MN Posts: 614	Re: My 57 Pro Street Looking good! I like seeing others progress. It helps me get going. You have mad fabrication skils. __________________ 55 2nd series Chevy Pickup 2019 Chevy Equinox(Daily driver) 2011 Chevy Malibu (Wife's car) MSRA Member I went to a bookstore and asked the saleswoman, "Where's the self-help section?" She said if she told me, it would defeat the purpose. -George Carlin

04-01-2012, 03:20 PM	#539
drivea55 Registered User Join Date: Oct 2009 Location: Monson,MA Posts: 503	Re: My 57 Pro Street Firewall is looking great! Those curves sure are eye appealing! Brian Posted via Mobile Device __________________ current project; 1950 GMC "Junk Yard Dawg" http://67-72chevytrucks.com/vboard/s...d.php?t=635960 ___________________________________________ SOLD to "ONEBADFIVEFIVE" http://67-72chevytrucks.com/vboard/s...d.php?t=436406

04-01-2012, 09:07 PM	#541
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,677	Re: My 57 Pro Street that is nice work kim i had to enlarge the stock recess to get my hei dist to fit i've seen part of a wheel barrow tub welded in there too __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

04-02-2012, 01:54 AM	#543
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: My 57 Pro Street excellent work kim - you really have it workin out nicely !

04-02-2012, 02:39 PM	#544
1959Chev Registered User Join Date: Aug 2011 Location: Hattiesburg, MS Posts: 109	Re: My 57 Pro Street Kim, I gotta say this is one of the slickest builds on the forum. You are a metal magician. I've gotten a lot of ideas from your build __________________ 2006 Chevy Silverado 3500(Duaramax/Allison) - DD 1997 Honda Civic - Work Beater 1981 Chevy Malibu - Race Car 1959 Chevy Truck - Project http://67-72chevytrucks.com/vboard/s...d.php?t=481442 2006 Honda Accord - Wife's ride

04-04-2012, 12:19 PM	#546
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: My 57 Pro Street A little up date. I needed to make my trans hump so here's what I did. I made a frame out of some round stock and then made some templates out of heavy card stock. Kim Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

04-04-2012, 12:22 PM	#547
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: My 57 Pro Street A little welding, bending and grinding and I have something that will be hidden by a center console and carpet. I'm waiting on some headers to see if they're going to fit before I get the cab back off to finish up the firewall. Kim Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

04-04-2012, 12:37 PM	#548
ambryatim Registered User Join Date: Aug 2009 Location: Corinth, TX Posts: 210	Re: My 57 Pro Street Very Nice!!! Keep up the excellent work! __________________ Better to have it and not need it, then to need it and not have it. Fork In The Road....Cummins Build My Build Thread... Alternative A/C Mounting for LS Engines 4L60E Transmission Rebuild Info Trailing Arm How To



Register or Log In To remove these advertisements.

04-04-2012, 12:43 PM	#549
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Re: My 57 Pro Street That's nice! When can u start on mine?

Register or Log In To remove these advertisements.