How to: Ruin a perfectly good C10 - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 11-07-2011, 12:38 AM

Your wheels look great. It definetly looks like you had some labor in it. Turned out awesome.

Bennett68C10 · 11-07-2011, 08:30 AM

Looks awesome, can't wait to see pics of them finished and on your truck

gringoloco · 11-07-2011, 08:53 AM

Quote:

Originally Posted by Rochlow

SWEET!! Can't wait to see them on the truck.

Me too! Hopefully soon...

Quote:

Originally Posted by VA72C10

Nice!!!

Thanks!

Quote:

Originally Posted by classicchev

COLD WINTER,,,, Unless you moved a little closer to the North Pole, I doubt it gets cold enough not to let the paint dry..

Haha- tis true, it doesn't really get cold here, but the paint doesn't like to stick when cold and flows better warm. Worst case, I break out the propane heater...

Quote:

Originally Posted by mcbassin

Your wheels look great. It definetly looks like you had some labor in it. Turned out awesome.

Thanks!

Quote:

Originally Posted by Bennett--G4L

Looks awesome, can't wait to see pics of them finished and on your truck

Me too! Coming soon...

Posted via Mobile Device

Rochlow · 11-07-2011, 09:14 AM

Trying to decide if I want to order mine this week or wait to see what they look like on your truck.

gringoloco · 11-07-2011, 10:52 AM

Check out showwheels website, there are a few pics of our trucks with the polished version- if you're impatient, like me. They are the exact same size/backspacing as the coys on my old blazer, just shorter tires, so that should give a good idea of fitment. If not, mine should be on in the next couple of weeks...
Posted via Mobile Device

bigblock73 · 11-08-2011, 09:49 PM

Thanks for the feedback on the speaker brackets! I am super pleased you are happy with them and the install...which looks GREAT...went well.

I will be picking up my second order tomorrow...so I have 25 more brackets for sale.

gringoloco · 11-15-2011, 12:34 AM

'Twas a nice, 80*, mid-November day, so I decided to lay some paint. Decided to re-coat all four wheels so that the color and sheen is consistent among them. After a TON of masking tape and a little work- I'm calling this project complete

Just hafta wait for them to fully cure- then mount 'em up!

FYI: The second pic is most accurately representative of the actual color...

SCOTI · 11-15-2011, 12:37 AM

Quote:

Originally Posted by gringoloco

'Twas a nice, 80*, mid-November day, so I decided to lay some paint. Decided to re-coat all four wheels so that the color and sheen is consistent among them. After a TON of masking tape and a little work- I'm calling this project complete

Just hafta wait for them to fully cure- then mount 'em up!

FYI: The second pic is most accurately representative of the actual color...

Not bad for a tall, skinny, newly-wed.

mcbassin · 11-15-2011, 12:56 AM

Those look great! I think you are on to something for sure. I'm ready to see these mounted up on your truck.

71Sleeper · 11-15-2011, 01:08 AM

The hard work paid off. They turned out great!

VA72C10 · 11-15-2011, 03:59 AM

They look great!

Bennett68C10 · 11-15-2011, 07:54 AM

Those turned out great, nice job

72BlckButy · 11-15-2011, 08:37 AM

Those look good!

gringoloco · 11-15-2011, 10:10 AM

Quote:

Originally Posted by SCOTI

Not bad for a tall, skinny, newly-wed.

Haha

yes, I have my moments...

Quote:

Originally Posted by mcbassin

Those look great! I think you are on to something for sure. I'm ready to see these mounted up on your truck.

Maybe so- I hear there may be at least one more set here on the boards done in a similar fashion fairly soon. Ready to see 'em mounted myself- this cure time wait is KILLING me- I just don't trust the mounting machine (or rather, the operator) not to gouge the soft paint...

Quote:

Originally Posted by 71Sleeper

The hard work paid off. They turned out great!

Quote:

Originally Posted by VA72C10

They look great!

Quote:

Originally Posted by Bennett--G4L

Those turned out great, nice job

Quote:

Originally Posted by 72BlckButy

Those look good!

Thanks, thanks, thanks, and thanks! More pics to come soon...

RocketKing · 11-15-2011, 11:37 AM

Fantastic job!

thor · 11-15-2011, 12:44 PM

perfectly ruined. me likey!

big_al_71 · 11-15-2011, 04:15 PM

Great job on the wheels....

gringoloco · 11-15-2011, 05:23 PM

Quote:

Originally Posted by RocketKing

Fantastic job!

Thanks!

Quote:

Originally Posted by thor

perfectly ruined. me likey!

Thanks! Stopped by the tire store at lunch- hoping they don't get actually ruined in the process...

Quote:

Originally Posted by big_al_71

Great job on the wheels....

Love the new avatar, big_al, looks like she's waiting for something...

mcbassin · 11-15-2011, 05:26 PM

Quote:

Originally Posted by gringoloco

Thanks!

Thanks! Stopped by the tire store at lunch- hoping they don't get actually ruined in the process...

Love the new avatar, big_al, looks like she's waiting for something...

I hope they don't scratch them after all that work.

I was thinking his truck is floating when I saw it

big_al_71 · 11-15-2011, 05:51 PM

Quote:

Originally Posted by gringoloco

Thanks!

Thanks! Stopped by the tire store at lunch- hoping they don't get actually ruined in the process...

Love the new avatar, big_al, looks like she's waiting for something...

True!!!

yes!!!!!

gringoloco · 11-15-2011, 09:36 PM

Sneaky preview...

Posted via Mobile Device

stealthy '69 · 11-15-2011, 09:51 PM

Lookin' good, now stop teasing us. Put the center caps on and get 'em mounted up.

VA72C10 · 11-15-2011, 09:53 PM

Nice!!! The rubber looks great on them!

**67cheby** · 11-15-2011, 09:57 PM

what we dont want to see them setting in the garage.....we know they are on the truck now quit holding out and give us a pic !! dont mess with us or we will be on you like a spider monkey !!

gringoloco · 11-15-2011, 11:56 PM

Okay, okay, okay

Here's a pic mounted...

11-07-2011, 12:38 AM	#576
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: How to: Ruin a perfectly good C10 Your wheels look great. It definetly looks like you had some labor in it. Turned out awesome. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-07-2011, 08:30 AM	#577
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: How to: Ruin a perfectly good C10 Looks awesome, can't wait to see pics of them finished and on your truck __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

11-07-2011, 09:14 AM	#579
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: How to: Ruin a perfectly good C10 Trying to decide if I want to order mine this week or wait to see what they look like on your truck.

11-07-2011, 10:52 AM	#580
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Check out showwheels website, there are a few pics of our trucks with the polished version- if you're impatient, like me. They are the exact same size/backspacing as the coys on my old blazer, just shorter tires, so that should give a good idea of fitment. If not, mine should be on in the next couple of weeks... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 11-07-2011 at 10:55 AM. Reason: Brain fart

11-08-2011, 09:49 PM	#581
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: How to: Ruin a perfectly good C10 Thanks for the feedback on the speaker brackets! I am super pleased you are happy with them and the install...which looks GREAT...went well. I will be picking up my second order tomorrow...so I have 25 more brackets for sale. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

11-15-2011, 12:34 AM	#582
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 'Twas a nice, 80, mid-November day, so I decided to lay some paint. Decided to re-coat all four wheels so that the color and sheen is consistent among them. After a TON of masking tape and a little work- I'm calling this project complete Just hafta wait for them to fully cure- then mount 'em up! FYI: The second pic is most accurately representative of the actual color... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide* How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-15-2011, 12:56 AM	#584
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: How to: Ruin a perfectly good C10 Those look great! I think you are on to something for sure. I'm ready to see these mounted up on your truck. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-15-2011, 01:08 AM	#585
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: How to: Ruin a perfectly good C10 The hard work paid off. They turned out great! __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

11-15-2011, 03:59 AM	#586
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: How to: Ruin a perfectly good C10 They look great! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-15-2011, 07:54 AM	#587
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: How to: Ruin a perfectly good C10 Those turned out great, nice job __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

11-15-2011, 08:37 AM	#588
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: How to: Ruin a perfectly good C10 Those look good! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-15-2011, 11:37 AM	#590
RocketKing Registered User Join Date: Dec 2008 Location: Berryville, AR Posts: 792	Re: How to: Ruin a perfectly good C10 Fantastic job! __________________ Rex

11-15-2011, 12:44 PM	#591
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: How to: Ruin a perfectly good C10 perfectly ruined. me likey! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

11-15-2011, 04:15 PM	#592
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: How to: Ruin a perfectly good C10 Great job on the wheels.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-15-2011, 09:36 PM	#596
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Sneaky preview... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 11-15-2011 at 11:57 PM.



Register or Log In To remove these advertisements.

11-15-2011, 09:53 PM	#598
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: How to: Ruin a perfectly good C10 Nice!!! The rubber looks great on them! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-15-2011, 09:57 PM	#599
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 what we dont want to see them setting in the garage.....we know they are on the truck now quit holding out and give us a pic !! dont mess with us or we will be on you like a spider monkey !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-15-2011, 11:56 PM	#600
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Okay, okay, okay Here's a pic mounted... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

Register or Log In To remove these advertisements.