Crewcab build - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PrerunnerRob · 02-05-2008, 02:44 AM

Quote:

Originally Posted by ChiefRocka

You on it today ??

I was, I cut my one of my doors down and got annoyed. This pillarless thing is killing me, I might have just ate a door(but thanks for the spares!

). I'm going to hvae to butt the two cabs together before I can go any further, and the angle of the front of the rear door will have to be changed. Original plans were to angle all of the pillars to match the front windshield pillar, but that is not going to happen. All the pillars are now going to be angled the same as the rear door closing edge, except fot the windshield pillar. The reason that there is an external filler between the two doors originally is to allow for the curved radius of the edge of the front door by the door handle and then following the angled door edge up to the roof. I'm now going to have to have the leading edge of the rear door follow the rounded edge by the door handle of the trailing edge of the front door. After that is done, I'm going to have to reangle the rear door edge forward to match the front door. AHHHHHH!

kdrodworks316 · 02-05-2008, 05:43 AM

I am going to start a ext cab in the spring, watching this thread close for ideas. looks good so far.

Frizzle Fry · 02-05-2008, 09:27 AM

Quote:

Originally Posted by PrerunnerRob

I was, I cut my one of my doors down and got annoyed. This pillarless thing is killing me, I might have just ate a door(but thanks for the spares!

). I'm going to hvae to butt the two cabs together before I can go any further, and the angle of the front of the rear door will have to be changed. Original plans were to angle all of the pillars to match the front windshield pillar, but that is not going to happen. All the pillars are now going to be angled the same as the rear door closing edge, except fot the windshield pillar. The reason that there is an external filler between the two doors originally is to allow for the curved radius of the edge of the front door by the door handle and then following the angled door edge up to the roof. I'm now going to have to have the leading edge of the rear door follow the rounded edge by the door handle of the trailing edge of the front door. After that is done, I'm going to have to reangle the rear door edge forward to match the front door. AHHHHHH!

Geeez... Probably sounds more complicated than it is. I'd like to see this too.

**Captainfab** · 02-05-2008, 02:53 PM

Quote:

Originally Posted by Frizzle Fry

Geeez... Probably sounds more complicated than it is. I'd like to see this too.

X2....sounds like you have it figured out though. I can't wait to see how it looks. It's bound to be a lot better than the original design.

poorboy · 02-08-2008, 07:34 AM

I was going through the pics on my comp and found a few more crew cab pics.

poorboy · 02-08-2008, 07:35 AM

*LILRED66* · 02-08-2008, 07:36 AM

That black thing is a real beauty. Looks like a real top-notch build.

Thanks for posting.

kris's66lwb · 02-08-2008, 08:16 AM

hey lil red do you go to the stove bolt the guy with the black truck is on there and he said that he might sell for the right price or buyer

*LILRED66* · 02-08-2008, 08:22 AM

kris's66lwb:

I jump back and forth from www.stovebolt.com to www.67-72chevytrucks.com. I am sure that thing is out of my price range, as it should be for such a nice build. Thanks for the information.

Woogeroo · 02-08-2008, 08:28 AM

Quote:

Originally Posted by poorboy

I was going through the pics on my comp and found a few more crew cab pics.

http://www.stovebolt.com/gallery/berg_chad_1963.html

The guys email is on the page there.

-W

*LILRED66* · 02-08-2008, 09:47 AM

Woog:

Thanks for the link. I vaguely recall seeing it on www.stovebolt.com. That fellow is one motivated, skilled and well financed individual.

jonzcustomshop · 02-08-2008, 09:59 AM

that orange one is more my speed, I'd love to build it just like that. low -short step. It has the right hood for me too!

Dinos63 · 02-08-2008, 01:08 PM

Quote:

Originally Posted by poorboy

were and who owns that cab?

poorboy · 02-08-2008, 02:06 PM

I don't remember where I got the pics from.

Frizzle Fry · 02-08-2008, 02:36 PM

Quote:

Originally Posted by Dinos63

were and who owns that cab?

http://67-72chevytrucks.com/vboard/s...hlight=crewcab

Dinos63 · 02-09-2008, 05:15 AM

Quote:

Originally Posted by Frizzle Fry

http://67-72chevytrucks.com/vboard/s...hlight=crewcab

THANKS FRIZ , I TALK TO HIM BUT HE DOSEN'T REMEMBER WERE IT IT WAS AT , THANKS AGAIN DINO

Frizzle Fry · 02-09-2008, 06:29 AM

Quote:

Originally Posted by Dinos63

THANKS FRIZ , I TALK TO HIM BUT HE DOSEN'T REMEMBER WERE IT IT WAS AT , THANKS AGIAN DINO

No prob. I hope you find one. I'm starting to want one myself!

PrerunnerRob · 02-09-2008, 10:10 AM

Alright, I need ideas on how to butt the doors together...
Since it will be pillarless from the outside, the two door lower egdes will line up with each other. Since the angle of the trailing edge of the front door, and the leading edge of the rear door dont match, I'm going to have to modify one of them to match. Now the difficult part here is in the fact that the trailing edge of the front door has a radius edge as it transitions from the flat door edge to the angled window frame. So if I want to make the rear door follow, I'm going to have to cut into the rear door and re-angle the leading edge of the the window frame to follow the front door. If you can't visualise it, just take a look at your drivers door and try to figure out how to butt another door behind it. Anyone have any suggestions or ideas on this?

jonzcustomshop · 02-09-2008, 11:11 AM

ok . here is my thinking.
keep going as if there is a 1-2 inch filler panel between the door posts.

most 4 doors have a thicker middle post, so it shouldn't look wrong.

straighten out the rear edge of the front door to but up to the rear door.

add material to the rear of the rear post on the front door, and the front of the front post on the rear door.

See quick pic.
I still used the one with all the posts the same as the windshield.

Is your rear door going to be suicide still?
Are you planning for all the doors to open seperatley, or only rear if front are already open?

62 C60 · 02-09-2008, 11:37 AM

put the striker on the floor and put the latch at the bottom of the door.

just my

**ChiefRocka** · 02-09-2008, 12:10 PM

OK....man here is an easy way out....weld both doors together to make them one....

Then Lambo the whole thing with like 12 lambo gas struts....simple.

protrash64 · 02-09-2008, 12:43 PM

..........and make each one open from a different end of the cab!!!!!!!!!

kdrodworks316 · 02-09-2008, 02:11 PM

make the window post angles match and suicide the back door. use roof and floor stikers like the new chevys. you will only be able to open the back when the front is open.

greg64 · 02-09-2008, 02:12 PM

Quote:

Originally Posted by ChiefRocka

OK....man here is an easy way out....weld both doors together to make them one....

Then Lambo the whole thing with like 12 lambo gas struts....simple.

Hell, I was thinking the same thing! But I figured this ISN'T what Rob wants to hear.

kdrodworks316 · 02-09-2008, 02:13 PM

anyone know where that orange cab is? I need that in my shop.

02-05-2008, 05:43 AM	#127
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: Crewcab build I am going to start a ext cab in the spring, watching this thread close for ideas. looks good so far.

02-08-2008, 07:34 AM	#130
poorboy Senior Member Join Date: Jun 2006 Location: Oregon City, Or Posts: 758	Re: Crewcab build I was going through the pics on my comp and found a few more crew cab pics. __________________ 63 short fleet Patina build http://67-72chevytrucks.com/vboard/s...d.php?t=287751 Man I want another one.

02-08-2008, 07:35 AM	#131
poorboy Senior Member Join Date: Jun 2006 Location: Oregon City, Or Posts: 758	Re: Crewcab build __________________ 63 short fleet Patina build http://67-72chevytrucks.com/vboard/s...d.php?t=287751 Man I want another one.

02-08-2008, 07:36 AM	#132
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Crewcab build That black thing is a real beauty. Looks like a real top-notch build. Thanks for posting.

02-08-2008, 08:16 AM	#133
kris's66lwb resident wrencher Join Date: Dec 2006 Location: ramona california Posts: 720	Re: Crewcab build hey lil red do you go to the stove bolt the guy with the black truck is on there and he said that he might sell for the right price or buyer

02-08-2008, 08:22 AM	#134
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Crewcab build kris's66lwb: I jump back and forth from www.stovebolt.com to www.67-72chevytrucks.com. I am sure that thing is out of my price range, as it should be for such a nice build. Thanks for the information. Last edited by LILRED66; 02-08-2008 at 08:22 AM.

02-08-2008, 09:47 AM	#136
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Crewcab build Woog: Thanks for the link. I vaguely recall seeing it on www.stovebolt.com. That fellow is one motivated, skilled and well financed individual.

02-08-2008, 09:59 AM	#137
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Crewcab build that orange one is more my speed, I'd love to build it just like that. low -short step. It has the right hood for me too!

02-08-2008, 02:06 PM	#139
poorboy Senior Member Join Date: Jun 2006 Location: Oregon City, Or Posts: 758	Re: Crewcab build I don't remember where I got the pics from. __________________ 63 short fleet Patina build http://67-72chevytrucks.com/vboard/s...d.php?t=287751 Man I want another one.

02-09-2008, 10:10 AM	#143
PrerunnerRob Registered User Join Date: Jan 2007 Location: San Jose Posts: 847	Re: Crewcab build Alright, I need ideas on how to butt the doors together... Since it will be pillarless from the outside, the two door lower egdes will line up with each other. Since the angle of the trailing edge of the front door, and the leading edge of the rear door dont match, I'm going to have to modify one of them to match. Now the difficult part here is in the fact that the trailing edge of the front door has a radius edge as it transitions from the flat door edge to the angled window frame. So if I want to make the rear door follow, I'm going to have to cut into the rear door and re-angle the leading edge of the the window frame to follow the front door. If you can't visualise it, just take a look at your drivers door and try to figure out how to butt another door behind it. Anyone have any suggestions or ideas on this?

02-09-2008, 11:11 AM	#144
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Crewcab build ok . here is my thinking. keep going as if there is a 1-2 inch filler panel between the door posts. most 4 doors have a thicker middle post, so it shouldn't look wrong. straighten out the rear edge of the front door to but up to the rear door. add material to the rear of the rear post on the front door, and the front of the front post on the rear door. See quick pic. I still used the one with all the posts the same as the windshield. Is your rear door going to be suicide still? Are you planning for all the doors to open seperatley, or only rear if front are already open? Attached Images Last edited by jonzcustomshop; 02-09-2008 at 11:12 AM.

02-09-2008, 11:37 AM	#145
62 C60 Registered User Join Date: Dec 2007 Location: Surrounded by corn in, Indiana Posts: 404	Re: Crewcab build put the striker on the floor and put the latch at the bottom of the door. just my __________________ -Jake 1962 C60 261 I6 5+2spd I like to be different Interior- Puke green dash, brown vinyl seat from an 87. Exterior- Rust 1993 Full Size Blazer 4x4 Stock for now. If you have a truck everyone is your friend. When they need to move.

02-09-2008, 12:10 PM	#146
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Crewcab build OK....man here is an easy way out....weld both doors together to make them one.... Then Lambo the whole thing with like 12 lambo gas struts....simple. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

02-09-2008, 12:43 PM	#147
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Crewcab build ..........and make each one open from a different end of the cab!!!!!!!!! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-09-2008, 02:11 PM	#148
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: Crewcab build make the window post angles match and suicide the back door. use roof and floor stikers like the new chevys. you will only be able to open the back when the front is open.



Register or Log In To remove these advertisements.

02-09-2008, 02:13 PM	#150
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: Crewcab build anyone know where that orange cab is? I need that in my shop.

Register or Log In To remove these advertisements.