Bracket Questuions

[lkt1954]

I posted better pictures in a post below.


I'm working on my 69 C10- 350 engine, hedman headers, short water pump, power steering and adding A/C from Cold Air.

I need some bracket help:
1) top left picture I presume this is the correct power steering bracket.
2) bottom left is all the other brackets I have. Again I presume the bracket on the right and the bottom are correct alternator brackets. The alternator that was on the truck the base where the long bolt goes through is as wide as the bracket- so it doesn't fit. I checked an alternator at the parts store and the bottom bolt hole is 2" wide. Are these the correct alternator brackets?
3) to right picture is the brackets for the alternator from Cold Aid. The top right bracket in the picture will not bolt to the headers unless I notch to clear the first tube. Do I need to uses these brackets or will original style brackets work with the power steering and adding A/C?
4) If the bracket in the top left picture is correct for the P/S then I need to find the bracket circled in the picture.

Am I missing something here? This is a little confusing for me today.

Thanks
Larry