Taylor plug wires made in Missouri - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67 twins** · 10-09-2021, 07:12 AM

I had bought a set of Taylor plug wires for the wife's truck because she wanted hot pink & Taylor is what popped up doing a Google search. They were well made wires & I was happy with them. Come to find out they are made right here in Missouri. Which is better than Accell which was my go to brand back in the day but is now made in China

I do believe that henceforth Taylor is my brand.

**special-K** · 10-09-2021, 07:23 AM

Taylor has been my plug wire company for as long as I can remember. I'm glad to hear they are still all American. I was afraid this thread would be to say otherwise. Glad to hear
"Made In USA"!

**Getter-Done** · 10-09-2021, 09:44 AM

This will be my brand of wires now

**truckster** · 10-09-2021, 10:25 AM

I put the Taylor wires for a 76 Corvette on my Blazer. The fit is pretty good and they're well made. I'd definitely buy them again.

**FleetsidePaul** · 10-09-2021, 10:28 AM

Quote:

Originally Posted by Getter-Done

This will be my brand of wires now

Same here.

**1970 CST Short Wide** · 10-09-2021, 11:43 PM

I have Taylor on my truck, been using them for years. Good Product

**The Rocknrod** · 10-11-2021, 04:05 PM

I've always used Taylor on my builds.

Shifty One · 10-11-2021, 04:44 PM

I've been using them since the 80's, but my most recent set was for a Corvette. I called their tech line, and explained to the rep that I wanted a set of the 10.5mm wires. He asked what kind of ignition system I was running that required such a big wire. I answered "relatively stock, they just look bad-ass"!
Made his day, I think....

Killer Bee · 10-11-2021, 07:52 PM

been supporting my shomies and never knew it

10-09-2021, 07:12 AM	#1
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 591	Taylor plug wires made in Missouri I had bought a set of Taylor plug wires for the wife's truck because she wanted hot pink & Taylor is what popped up doing a Google search. They were well made wires & I was happy with them. Come to find out they are made right here in Missouri. Which is better than Accell which was my go to brand back in the day but is now made in China I do believe that henceforth Taylor is my brand. __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

10-09-2021, 07:23 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Taylor plug wires made in Missouri Taylor has been my plug wire company for as long as I can remember. I'm glad to hear they are still all American. I was afraid this thread would be to say otherwise. Glad to hear "Made In USA"! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-09-2021 at 08:21 PM.

10-09-2021, 09:44 AM	#3
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,795	Re: Taylor plug wires made in Missouri This will be my brand of wires now __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

10-09-2021, 10:25 AM	#4
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,821	Re: Taylor plug wires made in Missouri I put the Taylor wires for a 76 Corvette on my Blazer. The fit is pretty good and they're well made. I'd definitely buy them again. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

10-09-2021, 11:43 PM	#6
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,064	Re: Taylor plug wires made in Missouri I have Taylor on my truck, been using them for years. Good Product __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

10-11-2021, 04:05 PM	#7
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Taylor plug wires made in Missouri I've always used Taylor on my builds. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-11-2021, 04:44 PM	#8
Shifty One Registered User Join Date: Dec 2014 Location: Tucson, AZ Posts: 576	Re: Taylor plug wires made in Missouri I've been using them since the 80's, but my most recent set was for a Corvette. I called their tech line, and explained to the rep that I wanted a set of the 10.5mm wires. He asked what kind of ignition system I was running that required such a big wire. I answered "relatively stock, they just look bad-ass"! Made his day, I think.... __________________ 1987 V20 farm-hand rescue 1998 C2500 lot-rot rescue

10-11-2021, 07:52 PM	#9
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,736	Re: Taylor plug wires made in Missouri been supporting my shomies and never knew it __________________ *I started out with nothing - and I still have most of it*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.