MS New Holley 600cfm carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

usmcchevy · 06-19-2010, 05:01 PM

New Holley 600cfm carb. Manual choke, mech secondaries. $150 SHIPPED in the lower 48 sold pending payment

Numbers are 4776-7 2182

*Dylan · 06-19-2010, 05:10 PM

Could we work out something if I bought both the carb and the intake?

usmcchevy · 06-19-2010, 05:26 PM

$340 Shipped for both the intake and carb.

*Dylan · 06-20-2010, 02:51 AM

Argh, I'll have to pass. As moving out is more of a priority at the moment. Bump for a good deal.

usmcchevy · 06-20-2010, 07:58 PM

TTT still have it!

usmcchevy · 06-21-2010, 05:51 PM

UP! lower price

peleni · 06-22-2010, 12:08 PM

Is that a spreadbore?

usmcchevy · 06-22-2010, 12:40 PM

Quote:

Originally Posted by peleni

Is that a spreadbore?

Square bore, Adapters are available from summit or pretty much any place though.

peleni · 06-22-2010, 03:27 PM

Am looking for a 4175 650 cfm manual choke, thanks for the reply though

CCCC · 06-22-2010, 11:03 PM

May be interested but do not know much about this carb or its applications. Please pardon the inquiries - and if this is more than you want to deal with, I understand.

s it a dependable type (free from a lot of tinkering and adjustments) and does the 600 CFM rating make it applicable to standard 350 SB and 402 BB applications (compared to Q-jet of same apps)?

Looks like it requires a fuel line setup that will feed two inlets - correct?

May I assume that the mechanical secondaries are activated my an extended position of the same control rod that operates the primaries, and is this an easy bolt-up fit for the fuel feet rods for engine types noted above?

Does any manual control choke fitting/cable come with it?

Thanks for any info.

CCCC

usmcchevy · 06-22-2010, 11:57 PM

May be interested but do not know much about this carb or its applications. Please pardon the inquiries - and if this is more than you want to deal with, I understand.
No problem, I will answer any and all questions to the best of my knowledge. Be fore warned though, some people are very opinionated about their carb choices and applications.

s it a dependable type (free from a lot of tinkering and adjustments) and does the 600 CFM rating make it applicable to standard 350 SB and 402 BB applications (compared to Q-jet of same apps)? It is a Holley mechanical secondary carb, which in my experience is about as dependable as carbs get. In general 600cfm is enough for a warmed over 350 or a mild 402. If you are looking to tow, some like a smaller 2 barrel carb better for more torque. For street driving and strip duty 600 is about right.

Looks like it requires a fuel line setup that will feed two inlets - correct? Yes, you need something like this to hook it up.
http://www.summitracing.com/parts/SUM-G3110/

May I assume that the mechanical secondaries are activated my an extended position of the same control rod that operates the primaries, and is this an easy bolt-up fit for the fuel feet rods for engine types noted above? Yes, the mechanical secondarys start opening about 1/2 throttle and all four barrels are fully open at full throttle. You can use your factory fuel line from your fuel pump or make a new one to go to the part i linked to above.

Does any manual control choke fitting/cable come with it? No, you would need to use your factory one or get another.

Let me know if you have any more questions.

usmcchevy · 06-24-2010, 09:05 PM

TTT

This thing is $340 from summit!
http://www.summitracing.com/parts/HLY-0-4776C/

Willing to trade for 67-68 hood.

usmcchevy · 08-05-2010, 02:55 PM

Still have this, offers?

**ScottH** · 08-05-2010, 03:12 PM

$120 shipped?

usmcchevy · 08-05-2010, 06:51 PM

Quote:

Originally Posted by ScottH

$120 shipped?

Sure, sending PM with payment info.

06-19-2010, 05:01 PM	#1
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	New Holley 600cfm carb New Holley 600cfm carb. Manual choke, mech secondaries. $150 SHIPPED in the lower 48 sold pending payment Numbers are 4776-7 2182 __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index Last edited by usmcchevy; 08-05-2010 at 10:45 PM.

06-19-2010, 05:10 PM	#2
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: New Holley 600cfm carb Could we work out something if I bought both the carb and the intake? __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

06-19-2010, 05:26 PM	#3
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: New Holley 600cfm carb $340 Shipped for both the intake and carb. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

06-20-2010, 02:51 AM	#4
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: New Holley 600cfm carb Argh, I'll have to pass. As moving out is more of a priority at the moment. Bump for a good deal. __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

06-20-2010, 07:58 PM	#5
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: New Holley 600cfm carb TTT still have it! __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

06-21-2010, 05:51 PM	#6
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: New Holley 600cfm carb UP! lower price __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

06-22-2010, 12:08 PM	#7
peleni Registered User Join Date: Apr 2009 Location: Austin, Texas Posts: 16	Re: New Holley 600cfm carb Is that a spreadbore?

06-22-2010, 03:27 PM	#9
peleni Registered User Join Date: Apr 2009 Location: Austin, Texas Posts: 16	Re: New Holley 600cfm carb Am looking for a 4175 650 cfm manual choke, thanks for the reply though

06-22-2010, 11:03 PM	#10
CCCC Registered User Join Date: Mar 2007 Location: San Pedro River, SE Arizona Posts: 734	Re: New Holley 600cfm carb May be interested but do not know much about this carb or its applications. Please pardon the inquiries - and if this is more than you want to deal with, I understand. s it a dependable type (free from a lot of tinkering and adjustments) and does the 600 CFM rating make it applicable to standard 350 SB and 402 BB applications (compared to Q-jet of same apps)? Looks like it requires a fuel line setup that will feed two inlets - correct? May I assume that the mechanical secondaries are activated my an extended position of the same control rod that operates the primaries, and is this an easy bolt-up fit for the fuel feet rods for engine types noted above? Does any manual control choke fitting/cable come with it? Thanks for any info. CCCC __________________ CCCC 67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison Moved but still in the family 70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350 Recently sent to new homes 72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp

06-22-2010, 11:57 PM	#11
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: New Holley 600cfm carb May be interested but do not know much about this carb or its applications. Please pardon the inquiries - and if this is more than you want to deal with, I understand. No problem, I will answer any and all questions to the best of my knowledge. Be fore warned though, some people are very opinionated about their carb choices and applications. s it a dependable type (free from a lot of tinkering and adjustments) and does the 600 CFM rating make it applicable to standard 350 SB and 402 BB applications (compared to Q-jet of same apps)? It is a Holley mechanical secondary carb, which in my experience is about as dependable as carbs get. In general 600cfm is enough for a warmed over 350 or a mild 402. If you are looking to tow, some like a smaller 2 barrel carb better for more torque. For street driving and strip duty 600 is about right. Looks like it requires a fuel line setup that will feed two inlets - correct? Yes, you need something like this to hook it up. http://www.summitracing.com/parts/SUM-G3110/ May I assume that the mechanical secondaries are activated my an extended position of the same control rod that operates the primaries, and is this an easy bolt-up fit for the fuel feet rods for engine types noted above? Yes, the mechanical secondarys start opening about 1/2 throttle and all four barrels are fully open at full throttle. You can use your factory fuel line from your fuel pump or make a new one to go to the part i linked to above. Does any manual control choke fitting/cable come with it? No, you would need to use your factory one or get another. Let me know if you have any more questions. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

06-24-2010, 09:05 PM	#12
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: New Holley 600cfm carb TTT This thing is $340 from summit! http://www.summitracing.com/parts/HLY-0-4776C/ Willing to trade for 67-68 hood. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

08-05-2010, 02:55 PM	#13
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: New Holley 600cfm carb Still have this, offers? __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

08-05-2010, 03:12 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Re: New Holley 600cfm carb $120 shipped? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.