Well I bascially got my pad build for my building - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 01-25-2013, 09:37 PM

I had to haul in 38 loads of clay to get it leveled up, 19 hours in a dump truck, about drove me crazy, then I had to spread and pack it. Planning on a 36x44 pole style metal building, with 16x8 and 9x8 garage doors in the east gable end and one walk in door, no windows. Have a buddy giving me a break on concrete and a buddy giving me a break building it. Then hopefully by next winter I will have it insulated and finish the inside and heater installed. Having a issue with a bowed power pole, the electric company says its the telephone companies, both have their lines on it. The electric company won't let me build on pad till they get it all straightened out. you can see the pole in first 2 pics, it has a 5 foot bow

teeitup · 01-25-2013, 09:38 PM

Had a little trouble, see the gate in 2nd pic, I was packing the clay with a loaded dump truck, got too far over the edge and down I went into the gate and fence, woops!!!!! Oh well I was going to move gate and fence anyway, lol

pritch · 01-25-2013, 09:57 PM

Looks good! It'll look even better with a concrete slab on it

Looks to me like the 1st pole in your fourth picture is pulling yours over. As long as the wires are not directly over the top of your building, I can't see what their beef is.

**lolife99** · 01-25-2013, 10:01 PM

Congrats on getting started!

teeitup · 01-25-2013, 10:03 PM

Thanks guys, I'm hoping we can get it going why the weather is decent. The electric company guy says I have to be 10 foot away from their power lines, when I'm looking up from building, I moved the building 3 feet south already, but thats as far as I can go, I had to get a variance to go that far.

ETsC10 · 01-26-2013, 11:11 AM

Holy cow, that's a lot of fill. No wonder you're exhausted!

Funny how qwerky stuff like that pole can cause so much
problem with moving forward. Would be an awful shame
if that pesky dump truck got away again and hit a pole...

.

teeitup · 01-27-2013, 12:42 AM

Thanks Ellen, I told my wife what you said about about the dump truck and pole, she thought it was a good idea

PanelDeland · 01-27-2013, 02:02 PM

I would send the power company a letter.State start date on building and see what they say.Otherwise,they may be couple years fixing it.If you can figure out a polite way to tell them you will charge them for any building delay it might help.

paintman · 01-27-2013, 07:54 PM

Just be grateful that you don't live in New Jersey like I do! If you tried to truck in 38 loads of clay in this state it would cost you 50K for soil inspections, soil erosion prevention, and topography engineering. That's just in hopes of obtaining local permits. Plus if you lived anywhere near water all bets are off. That is unless your a local politician. Then you can do anything you want.

teeitup · 01-29-2013, 09:24 PM

Well now the phone co says its not theirs and the power co says its not theirs, I wish they would make up their mind who's it is

hayhauler71 · 01-29-2013, 09:57 PM

Quote:

Originally Posted by teeitup

Well now the phone co says its not theirs and the power co says its not theirs, I wish they would make up their mind who's it is

Tell both it is yours and take care of it with the dump truck

pritch · 01-29-2013, 10:05 PM

Quote:

Originally Posted by teeitup

Well now the phone co says its not theirs and the power co says its not theirs, I wish they would make up their mind who's it is

Kansas, huh. Don't you guys have those freak tornados that can crop up in the middle of the night and blow a chain saw right thru a power pole? I see that all the time on the news

ETsC10 · 01-29-2013, 11:52 PM

**zicc1835** · 01-30-2013, 01:00 AM

Quote:

Originally Posted by paintman

Just be grateful that you don't live in New Jersey like I do! If you tried to truck in 38 loads of clay in this state it would cost you 50K for soil inspections, soil erosion prevention, and topography engineering. That's just in hopes of obtaining local permits. Plus if you lived anywhere near water all bets are off. That is unless your a local politician. Then you can do anything you want.

this is all the truth

good luck with the BIG build Randy hope to get to meet you in my travels

bodyman922 · 02-16-2013, 11:22 PM

I would ask both companies for a legal document proving they do not own the pole. That way you have legal proof they do not want to fix their problem. Put up your building and if they complain you can show them they have released their rights in the situation allowing you to build without their concern.

**thelonerife** · 02-17-2013, 02:13 AM

If no one says its theirs I'd start building. Let them worry about it when it falls.

DesertCat · 02-17-2013, 03:54 AM

Quote:

Originally Posted by teeitup

Thanks guys, I'm hoping we can get it going why the weather is decent. The electric company guy says I have to be 10 foot away from their power lines, when I'm looking up from building, I moved the building 3 feet south already, but thats as far as I can go, I had to get a variance to go that far.

So has the power company stalled your building permit? In your first post you said they wouldn't let you build on your pad until it was resolved. How?

I'm tracking with Bodyman922's comments, if it were me I would have my lawyer write them both a letter. Wouldn't cost much and they are far more likely to take action when they know you are serious.

Usual disclaimers - not a lawyer, have no money, fighting a dry skin condition, work in a train wreck of a country...

teeitup · 02-17-2013, 10:19 AM

Sorry guys I was gone 6 days, got a call before I left and forgot to reply on this thread. Electric company is staking claim to it now and are going to put up a new pole, BUT the guy says it may be 6 weeks to do that and still won't let me start on building. It really sucks because the weather hasn't been that bad here and my guy could of had most of it up by now

teeitup · 02-19-2013, 07:19 PM

WOO HOO got the pole set today, but now its supposed to start snowing here tomorrow night, they are saying 10-15 inches, thats just great!!!!!!! It might be spring now before we get it started. If they would of got the pole deal straightened out weeks ago, we could of had the garage up by now. Here are pics of new pole and the old pole cut off some beside it

teeitup · 03-03-2013, 10:21 PM

Got the laminate poles sat in the ground today, hopefully concrete buddy will get it poured this week

**zicc1835** · 03-04-2013, 12:53 AM

progress .....keep the pics coming

DesertCat · 03-04-2013, 11:48 AM

Cool! Now get back to work!

teeitup · 03-05-2013, 09:07 PM

Zicc1835, more pics Wed after work
Desertcat, it seems thats all I've been doing

Got the drain put in today and most of the poles extended up to 10 foot, my buddy Rod is putting gerts on and finishing poles tomorrow. Concrete guy is coming to set it all up and put sand in tomorrow and they planning on pouring Fri morning. Trusses are coming Mon, I have to figure out how we are going to put up the gable truss on the west side, he said it weighs 300#'s, so I don't think we can lift it up there by hand, I may have rent a boom truck (unless you guys have any other ideas) we won't be able to drive on concrete with backhoe. My boss is coming back tomorrow so I won't be able to help him as much on building till I get off work

Its getting there though, very happy with it all so far, wish it was done though

shortbed70 · 03-05-2013, 10:58 PM

Quote:

Originally Posted by pritch

Kansas, huh. Don't you guys have those freak tornados that can crop up in the middle of the night and blow a chain saw right thru a power pole? I see that all the time on the news

Hahaha... Yes we do! I would insert angry beaver vs chainsaw though... So what size dumptruck were you driving? That's alot of clay...
Posted via Mobile Device

71swb4x4 · 03-05-2013, 11:12 PM

Looking good Randy!!

01-25-2013, 09:37 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Well I bascially got my pad build for my building I had to haul in 38 loads of clay to get it leveled up, 19 hours in a dump truck, about drove me crazy, then I had to spread and pack it. Planning on a 36x44 pole style metal building, with 16x8 and 9x8 garage doors in the east gable end and one walk in door, no windows. Have a buddy giving me a break on concrete and a buddy giving me a break building it. Then hopefully by next winter I will have it insulated and finish the inside and heater installed. Having a issue with a bowed power pole, the electric company says its the telephone companies, both have their lines on it. The electric company won't let me build on pad till they get it all straightened out. you can see the pole in first 2 pics, it has a 5 foot bow Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-25-2013 at 09:45 PM.

01-25-2013, 09:38 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Had a little trouble, see the gate in 2nd pic, I was packing the clay with a loaded dump truck, got too far over the edge and down I went into the gate and fence, woops!!!!! Oh well I was going to move gate and fence anyway, lol Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-25-2013 at 09:43 PM.

01-25-2013, 09:57 PM	#3
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Well I bascially got my pad build for my building Looks good! It'll look even better with a concrete slab on it Looks to me like the 1st pole in your fourth picture is pulling yours over. As long as the wires are not directly over the top of your building, I can't see what their beef is. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

01-25-2013, 10:01 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Well I bascially got my pad build for my building Congrats on getting started! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-25-2013, 10:03 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks guys, I'm hoping we can get it going why the weather is decent. The electric company guy says I have to be 10 foot away from their power lines, when I'm looking up from building, I moved the building 3 feet south already, but thats as far as I can go, I had to get a variance to go that far. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-26-2013, 11:11 AM	#6
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Well I bascially got my pad build for my building Holy cow, that's a lot of fill. No wonder you're exhausted! Funny how qwerky stuff like that pole can cause so much problem with moving forward. Would be an awful shame if that pesky dump truck got away again and hit a pole... . __________________ . Forum Guidelines and Rules Buying and Selling Code of Conduct Become a Board Supporter! Truck FAQ Ellen... the boards artsy-fartsy, eclectic, truck-lovin' gal-member...

01-27-2013, 12:42 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks Ellen, I told my wife what you said about about the dump truck and pole, she thought it was a good idea __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-27-2013, 02:02 PM	#8
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Well I bascially got my pad build for my building I would send the power company a letter.State start date on building and see what they say.Otherwise,they may be couple years fixing it.If you can figure out a polite way to tell them you will charge them for any building delay it might help. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-27-2013, 07:54 PM	#9
paintman Registered User Join Date: Dec 2010 Location: washington NJ Posts: 766	Re: Well I bascially got my pad build for my building Just be grateful that you don't live in New Jersey like I do! If you tried to truck in 38 loads of clay in this state it would cost you 50K for soil inspections, soil erosion prevention, and topography engineering. That's just in hopes of obtaining local permits. Plus if you lived anywhere near water all bets are off. That is unless your a local politician. Then you can do anything you want.

01-29-2013, 09:24 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Well now the phone co says its not theirs and the power co says its not theirs, I wish they would make up their mind who's it is __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-29-2013, 11:52 PM	#13
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Well I bascially got my pad build for my building

02-16-2013, 11:22 PM	#15
bodyman922 Registered User Join Date: Apr 2011 Location: Minnesota Posts: 38	Re: Well I bascially got my pad build for my building I would ask both companies for a legal document proving they do not own the pole. That way you have legal proof they do not want to fix their problem. Put up your building and if they complain you can show them they have released their rights in the situation allowing you to build without their concern.

02-17-2013, 02:13 AM	#16
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Well I bascially got my pad build for my building If no one says its theirs I'd start building. Let them worry about it when it falls. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

02-17-2013, 10:19 AM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Sorry guys I was gone 6 days, got a call before I left and forgot to reply on this thread. Electric company is staking claim to it now and are going to put up a new pole, BUT the guy says it may be 6 weeks to do that and still won't let me start on building. It really sucks because the weather hasn't been that bad here and my guy could of had most of it up by now __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2013, 07:19 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building WOO HOO got the pole set today, but now its supposed to start snowing here tomorrow night, they are saying 10-15 inches, thats just great!!!!!!! It might be spring now before we get it started. If they would of got the pole deal straightened out weeks ago, we could of had the garage up by now. Here are pics of new pole and the old pole cut off some beside it Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

03-03-2013, 10:21 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Got the laminate poles sat in the ground today, hopefully concrete buddy will get it poured this week Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-04-2013, 12:53 AM	#21
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,111	Re: Well I bascially got my pad build for my building progress .....keep the pics coming __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

03-04-2013, 11:48 AM	#22
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Well I bascially got my pad build for my building Cool! Now get back to work! __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

03-05-2013, 09:07 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Zicc1835, more pics Wed after work Desertcat, it seems thats all I've been doing Got the drain put in today and most of the poles extended up to 10 foot, my buddy Rod is putting gerts on and finishing poles tomorrow. Concrete guy is coming to set it all up and put sand in tomorrow and they planning on pouring Fri morning. Trusses are coming Mon, I have to figure out how we are going to put up the gable truss on the west side, he said it weighs 300#'s, so I don't think we can lift it up there by hand, I may have rent a boom truck (unless you guys have any other ideas) we won't be able to drive on concrete with backhoe. My boss is coming back tomorrow so I won't be able to help him as much on building till I get off work Its getting there though, very happy with it all so far, wish it was done though __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-05-2013, 11:12 PM	#25
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Well I bascially got my pad build for my building Looking good Randy!! __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

Register or Log In To remove these advertisements.