Well I bascially got my pad build for my building - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-24-2013, 07:40 PM

Thanks Jeff It will be a good place to work on trucks when I get done

Nate We ended up with 5 inches I shoveled whole of the Floor out pretty much wore me out
Posted via Mobile Device

teeitup · 03-24-2013, 08:28 PM

Pics as of today, we finished getting side walls on yesterday before snow storm, got 5 inches of wet snow last night, I shoveled it all out today and we got the inner side wall studs in today

72BlckButy · 03-24-2013, 08:41 PM

Man that's going to be nice.
Posted via Mobile Device

**zicc1835** · 03-24-2013, 09:41 PM

nice progress hope u have better weather ....that storm is headed my way

rambler · 03-25-2013, 01:36 PM

where will the lift going to be at...?

teeitup · 03-25-2013, 08:53 PM

Thanks Nate

Thanks Jess

Sorry Joe, no lift, maybe at a later date, the ceiling is only 10 foot so it would have to be a mid lift is all, plus this has been a bit more expensive to do that I had originally thought

I think he is going to try to start putting tin on roof Tues if its not windy

Thanks Randy

**t korinek** · 03-26-2013, 12:46 AM

Man I'm jealous, of the building, not the snow.
Looking good.
Tom

rmvlt1100 · 03-26-2013, 01:34 PM

Coming along very nice!! I think I would add a bedroom to that build and move out there if I gad the room to build something like that.

Have a good day.
Posted via Mobile Device
Posted via Mobile Device

teeitup · 03-26-2013, 08:29 PM

Thanks Tom, I'm ready for warm weather for sure, the building will be alot easier on me instead of crawling around on the rocks, I did that for way to many years

Thanks rmvlt1100, I may have to do that if my wife sfinds out how much I spent on it to build

He got the north roof on today, south will be on tomorrow. Hoping the outside trim will be all on by Friday night. Electrical should be done by Fri. I may insulate walls Sat and then once the tin comes in for the inside we will start putting it all up, then the lights, heater and garage doors next week.
Then I have to get a load of gravel and get the dog fence put up and the gas meter ran to it by gas company. I'm going to wait and insulate the ceiling this summer

I'm ready for it to be done, its wearing me out, no time to do anything

Thanks again Randy

teeitup · 03-31-2013, 09:05 AM

Progressed some this week

teeitup · 03-31-2013, 09:06 AM

rear view

**lolife99** · 03-31-2013, 09:09 AM

Very nice looking building!

chipflyer · 03-31-2013, 10:59 AM

Guys, I saw this in person yesterday, very nice Randy. You guys should be proud of your work.

Jeff

orngsikL · 03-31-2013, 12:00 PM

gonna be nice!

**72 Super** · 03-31-2013, 07:10 PM

Randy, Wow what a great looking shop, very nice!

Ray

72BlckButy · 03-31-2013, 09:21 PM

Nice looking shop Randy!!!

You don't have to give exact numbers but what kind of expense would someone need to plan for if they were to build a shop like this?
Posted via Mobile Device

**zicc1835** · 03-31-2013, 10:51 PM

very nice .....once you got going it seemed to go up quick ..... i want one

**29od1** · 03-31-2013, 11:46 PM

Looks great Randy! With that white interior you'll actually be able to see in there compared to the pitch black of your blacksmith's shed.

Now when are you going to get back to your real job and start parting???

teeitup · 04-01-2013, 08:01 AM

Thanks Keith

Thanks Jeff, it was good to see you Sat

orniskl, Thanks

Thanks Ray

Thanks Nate, I'll have to do all the figures, its alot more than I first thought

Thanks Jess, its getting there, we have been on it for a month exactly, had 4 days in there he couldn't work because of weather

Thanks David, the white tin is nice but its real light, its shows waves and inperfections, but once I get everything on walls you shouldn't notice it. Parting trucks is alot of easier than building a garage

Thanks all, Randy

72BlckButy · 04-01-2013, 08:09 AM

That's kind of what I figured. Haha.

Would love to have a shop like this but it will be a while.
Posted via Mobile Device

teeitup · 04-18-2013, 07:40 PM

Well I got it all done except getting the heater mounted to ceiling, gas line run to main and insulate the ceiling (I'm doing that this summer). Started hauling in some of my tools and junk, still have to get my benches moved in and everything sorted out and put away. I'll get some pics this weekend when its sunny outside

72BlckButy · 04-18-2013, 08:18 PM

Nice work Randy.

Keep at it buddy. Can't wait to see the final pictures.
Posted via Mobile Device

Dinos63 · 04-19-2013, 06:12 PM

Whoa!! Very nice congrats

**thelonerife** · 04-21-2013, 11:24 PM

I need one of those so bad! Congrats Randy.

teeitup · 07-25-2013, 09:07 PM

Well I'm gaining on it, got the sod laid around it, got most of inside down, still have to hang all the tools up. I have to get heater vent ran outside and ceiling blown with insulation. Paint the fence, then I'm done

03-24-2013, 07:40 PM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks Jeff It will be a good place to work on trucks when I get done Nate We ended up with 5 inches I shoveled whole of the Floor out pretty much wore me out Posted via Mobile Device __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-24-2013, 08:28 PM	#52
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Pics as of today, we finished getting side walls on yesterday before snow storm, got 5 inches of wet snow last night, I shoveled it all out today and we got the inner side wall studs in today Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-24-2013, 08:41 PM	#53
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Well I bascially got my pad build for my building Man that's going to be nice. Posted via Mobile Device __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-24-2013, 09:41 PM	#54
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,111	Re: Well I bascially got my pad build for my building nice progress hope u have better weather ....that storm is headed my way __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

03-25-2013, 01:36 PM	#55
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: Well I bascially got my pad build for my building where will the lift going to be at...? __________________ No matter where you are..... There you are... Buckaroo Banzi

03-25-2013, 08:53 PM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks Nate Thanks Jess Sorry Joe, no lift, maybe at a later date, the ceiling is only 10 foot so it would have to be a mid lift is all, plus this has been a bit more expensive to do that I had originally thought I think he is going to try to start putting tin on roof Tues if its not windy Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-26-2013, 12:46 AM	#57
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,189	Re: Well I bascially got my pad build for my building Man I'm jealous, of the building, not the snow. Looking good. Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-26-2013, 01:34 PM	#58
rmvlt1100 Registered User Join Date: Jan 2012 Location: Crest Hill, IL Posts: 337	Re: Well I bascially got my pad build for my building Coming along very nice!! I think I would add a bedroom to that build and move out there if I gad the room to build something like that. Have a good day. Posted via Mobile Device Posted via Mobile Device __________________ This is my Build A 5.3L 1965 C-10 Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=502100

03-26-2013, 08:29 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks Tom, I'm ready for warm weather for sure, the building will be alot easier on me instead of crawling around on the rocks, I did that for way to many years Thanks rmvlt1100, I may have to do that if my wife sfinds out how much I spent on it to build He got the north roof on today, south will be on tomorrow. Hoping the outside trim will be all on by Friday night. Electrical should be done by Fri. I may insulate walls Sat and then once the tin comes in for the inside we will start putting it all up, then the lights, heater and garage doors next week. Then I have to get a load of gravel and get the dog fence put up and the gas meter ran to it by gas company. I'm going to wait and insulate the ceiling this summer I'm ready for it to be done, its wearing me out, no time to do anything Thanks again Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2013, 09:05 AM	#60
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Progressed some this week Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2013, 09:06 AM	#61
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building rear view Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2013, 09:09 AM	#62
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Well I bascially got my pad build for my building Very nice looking building! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-31-2013, 10:59 AM	#63
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Well I bascially got my pad build for my building Guys, I saw this in person yesterday, very nice Randy. You guys should be proud of your work. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

03-31-2013, 12:00 PM	#64
orngsikL Registered User Join Date: Oct 2011 Location: Watson, Louisiana Posts: 312	Re: Well I bascially got my pad build for my building gonna be nice! __________________ build thread - 1972 C/10 "Ethyl" 1974 C/10 " Paw Paw" C/10 Club Louisiana instagram - @esso_c10 @projectpawpaw

03-31-2013, 07:10 PM	#65
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,678	Re: Well I bascially got my pad build for my building Randy, Wow what a great looking shop, very nice! Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White



Register or Log In To remove these advertisements.

03-31-2013, 09:21 PM	#66
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Well I bascially got my pad build for my building Nice looking shop Randy!!! You don't have to give exact numbers but what kind of expense would someone need to plan for if they were to build a shop like this? Posted via Mobile Device __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-31-2013, 10:51 PM	#67
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,111	Re: Well I bascially got my pad build for my building very nice .....once you got going it seemed to go up quick ..... i want one __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

03-31-2013, 11:46 PM	#68
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Well I bascially got my pad build for my building Looks great Randy! With that white interior you'll actually be able to see in there compared to the pitch black of your blacksmith's shed. Now when are you going to get back to your real job and start parting???

04-01-2013, 08:01 AM	#69
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks Keith Thanks Jeff, it was good to see you Sat orniskl, Thanks Thanks Ray Thanks Nate, I'll have to do all the figures, its alot more than I first thought Thanks Jess, its getting there, we have been on it for a month exactly, had 4 days in there he couldn't work because of weather Thanks David, the white tin is nice but its real light, its shows waves and inperfections, but once I get everything on walls you shouldn't notice it. Parting trucks is alot of easier than building a garage Thanks all, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-01-2013, 08:09 AM	#70
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Well I bascially got my pad build for my building That's kind of what I figured. Haha. Would love to have a shop like this but it will be a while. Posted via Mobile Device __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-18-2013, 07:40 PM	#71
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Well I got it all done except getting the heater mounted to ceiling, gas line run to main and insulate the ceiling (I'm doing that this summer). Started hauling in some of my tools and junk, still have to get my benches moved in and everything sorted out and put away. I'll get some pics this weekend when its sunny outside __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-18-2013, 08:18 PM	#72
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Well I bascially got my pad build for my building Nice work Randy. Keep at it buddy. Can't wait to see the final pictures. Posted via Mobile Device __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-19-2013, 06:12 PM	#73
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Well I bascially got my pad build for my building Whoa!! Very nice congrats __________________ CHEVY ONLY... Nothin Else !

04-21-2013, 11:24 PM	#74
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Well I bascially got my pad build for my building I need one of those so bad! Congrats Randy. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

07-25-2013, 09:07 PM	#75
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Well I'm gaining on it, got the sod laid around it, got most of inside down, still have to hang all the tools up. I have to get heater vent ran outside and ceiling blown with insulation. Paint the fence, then I'm done Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.