Doing LS Swap - I have no idea what I'm doing! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

EagleChief · 05-26-2021, 01:41 PM

Well, time to start getting around to the truck again. Had a slight delay, as Mother's Day and wife's birthday came around - so, new kitchen sink & faucet and some concert tickets kinda set me back a bit.

Anyway, just purchased the sending unit and fuel pump for the Wrangler fuel tank swap. Decided to go that route. I still need to get the tank. After searching on here and reading up on the Wrangler tank swap, I ended up getting the sending unit for a '87 S10 Blazer, an AC Delco #EP381 fuel pump. Will I still need the pressure regulator? From what I can tell, that pump is rated at 60psi and 155lph. And, I'm guessing I'll still want a fuel filter in line, right?

05-26-2021, 01:41 PM	#10
EagleChief Registered User Join Date: Sep 2016 Location: Tulsa, OK Posts: 410	Re: Doing LS Swap - I have no idea what I'm doing! Well, time to start getting around to the truck again. Had a slight delay, as Mother's Day and wife's birthday came around - so, new kitchen sink & faucet and some concert tickets kinda set me back a bit. Anyway, just purchased the sending unit and fuel pump for the Wrangler fuel tank swap. Decided to go that route. I still need to get the tank. After searching on here and reading up on the Wrangler tank swap, I ended up getting the sending unit for a '87 S10 Blazer, an AC Delco #EP381 fuel pump. Will I still need the pressure regulator? From what I can tell, that pump is rated at 60psi and 155lph. And, I'm guessing I'll still want a fuel filter in line, right? __________________ 1971 C10 - Hugger Orange/White My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=780197 LS Swap Thread: https://67-72chevytrucks.com/vboard/...d.php?t=811460



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.