The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board > 1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-18-2019, 11:48 PM   #1
pwdcougar
Registered User
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 1,302
Re: NJ Suburban

Sandblasting indoors is a bad idea. My positive pressure mask idea worked perfectly but I’ll be cleaning the abrasive dust out of my garage for years.

Paul
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"
1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 01-19-2019, 02:47 PM   #2
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,344
Re: NJ Suburban

Quote:
Originally Posted by pwdcougar View Post
Sandblasting indoors is a bad idea. My positive pressure mask idea worked perfectly but I’ll be cleaning the abrasive dust out of my garage for years.

Paul

I've never tried it. I use the cabinet inside and my big pressurized blaster outside. The only problem is I can only do the bigger stuff when the weather is decent.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 01-19-2019, 03:30 PM   #3
pwdcougar
Registered User
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 1,302
Re: NJ Suburban

Quote:
Originally Posted by LockDoc View Post
I've never tried it. I use the cabinet inside and my big pressurized blaster outside. The only problem is I can only do the bigger stuff when the weather is decent.

LockDoc
Leon I set up plastic on all sides of the shell with binder clips every 6 inches or so. The excess plastic went along the floor and overlapped underneath a couple feet all the way around. I didn’t realize that the pressure of my mask and the pressure of the sandblasting gun would push all of the super fine particles out. Then I set up a fan that vented the booth out the side door of the garage. By then though the damage was done! The fine dust sticks to everything and has to be wiped off. After finishing and taking the boot down I opened both doors and got out my backpack leaf blower. I’ve almost got all of the sand out of the nooks and crannies on the shell and I have to say it looks really good.

Paul
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"
1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 01-20-2019, 01:26 AM   #4
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,344
Re: NJ Suburban

Quote:
Originally Posted by pwdcougar View Post
Leon I set up plastic on all sides of the shell with binder clips every 6 inches or so. The excess plastic went along the floor and overlapped underneath a couple feet all the way around. I didn’t realize that the pressure of my mask and the pressure of the sandblasting gun would push all of the super fine particles out. Then I set up a fan that vented the booth out the side door of the garage. By then though the damage was done! The fine dust sticks to everything and has to be wiped off. After finishing and taking the boot down I opened both doors and got out my backpack leaf blower. I’ve almost got all of the sand out of the nooks and crannies on the shell and I have to say it looks really good.

Paul

Good deal. Sounds like you had a lot of extra work to do though. That's a bummer.....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com