FL Wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nsb29** · 02-11-2022, 03:15 PM

I need an Original pinion nut and washer for my 65 12 bolt The original hardened washer is the most important part but nut not so much so
Thanks

duallyjams · 02-12-2022, 06:21 PM

Are you looking for a new or used ?

**nsb29** · 02-12-2022, 07:41 PM

Quote:

Originally Posted by duallyjams

Are you looking for a new or used ?

Used washer, as the original washer is hardened the ones you get are stamped from mild steel and become concaved before crushing the sleeve I have called several companies who offer a replacement nuts and washers and they don’t know if they’re washer is hardened or not the ones you get from Richmond gear are not nuts you can get anywhere

**MT65** · 02-13-2022, 12:04 PM

Quote:

Originally Posted by nsb29

Used washer, as the original washer is hardened the ones you get are stamped from mild steel and become concaved before crushing the sleeve I have called several companies who offer a replacement nuts and washers and they don’t know if they’re washer is hardened or not the ones you get from Richmond gear are not nuts you can get anywhere

Why don’t you case harden it yourself, I’m sure the temperature necessary, probably red hot is out there to be found, a container of used oil to quench it and you have your part….

**nsb29** · 02-13-2022, 03:47 PM

Quote:

Originally Posted by MT65

Why don’t you case harden it yourself, I’m sure the temperature necessary, probably red hot is out there to be found, a container of used oil to quench it and you have your part….

And if you over temper it ?
It will brake
I know there are a lot of scrap 12 bolts sum one will have one or sum one will tell me who sells a hardened one

**MT65** · 02-13-2022, 07:31 PM

Being this is under compression with something behind it, I would highly doubt that, its not rocket science, I watch my friends who make precision parts for weapons do it regularly, just get your temperature you need to hit and make it happen…or just wait for someone…….

**nsb29** · 02-14-2022, 12:35 PM

Quote:

Originally Posted by MT65

Being this is under compression with something behind it, I would highly doubt that, its not rocket science, I watch my friends who make precision parts for weapons do it regularly, just get your temperature you need to hit and make it happen…or just wait for someone…….

We’ve all watched forged in fire

**MT65** · 02-14-2022, 10:39 PM

You may have , myself, not so much, I prefer to deal with professionals, not wanna be….

**nsb29** · 02-15-2022, 11:24 AM

Quote:

Originally Posted by mt65

you may have , myself, not so much, i prefer to deal with professionals, not wanna be….

lmao

**The Rocknrod** · 02-15-2022, 11:56 AM

Says it's hardened - https://www.strangeengineering.net/p...n-washer.html/

**nsb29** · 02-15-2022, 04:38 PM

Yeah I checked them out but like so many times it isn’t what it says it is the opening in the yolk is 1.58 the washer they sell is 1.73 Dennys drivelines says they have the nut and washer I’ll check them out Yukon gear Richmond gear all of them say made in the USA but they buy all the parts from somewhere else

**uncle** · 02-24-2022, 09:04 AM

Ever find one? I probably have one. Will check this weekend.

**nsb29** · 02-24-2022, 11:45 AM

Yes I did finally end up coming up with one there is a guy on eBay that makes them two OEM specifications the ones you get in the kits are junk the most important thing to remember is don’t loose your original one LMAO Thanks for the offer

**The Rocknrod** · 02-25-2022, 11:05 AM

Quote:

Originally Posted by nsb29

Yes I did finally end up coming up with one there is a guy on eBay that makes them two OEM specifications the ones you get in the kits are junk the most important thing to remember is don’t loose your original one LMAO Thanks for the offer

You got a link or a seller name?

**nsb29** · 03-01-2022, 05:37 PM

Name: 4D09C5D2-86EA-4219-A7F1-1FDC79C51CA0.jpg
Views: 166
Size: 26.2 KB

Quote:

Originally Posted by the rocknrod

you got a link or a seller name?

**The Rocknrod** · 03-01-2022, 05:41 PM

Thanks, your seller All Powersports Drivetrain - https://www.ebay.com/itm/19239887496...0AAOSw-09aNBZx
Quick has them also - https://www.ebay.com/itm/39143528587...EAAOSwYmZXElEz
Big difference I see.

**nsb29** · 03-02-2022, 10:49 AM

It’s hard to know looking at a picture but the one from Quick looks like they are just stamped steel like the junk that comes in the kits so I went with powersports and its quality

02-11-2022, 03:15 PM	#1
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Wanted I need an Original pinion nut and washer for my 65 12 bolt The original hardened washer is the most important part but nut not so much so Thanks __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent

02-12-2022, 06:21 PM	#2
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Wanted Are you looking for a new or used ? __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

02-13-2022, 07:31 PM	#6
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 437	Re: Wanted Being this is under compression with something behind it, I would highly doubt that, its not rocket science, I watch my friends who make precision parts for weapons do it regularly, just get your temperature you need to hit and make it happen…or just wait for someone…….

02-14-2022, 10:39 PM	#8
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 437	Re: Wanted You may have , myself, not so much, I prefer to deal with professionals, not wanna be….

02-15-2022, 11:56 AM	#10
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Wanted Says it's hardened - https://www.strangeengineering.net/p...n-washer.html/ __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-15-2022, 04:38 PM	#11
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Wanted Yeah I checked them out but like so many times it isn’t what it says it is the opening in the yolk is 1.58 the washer they sell is 1.73 Dennys drivelines says they have the nut and washer I’ll check them out Yukon gear Richmond gear all of them say made in the USA but they buy all the parts from somewhere else __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent

02-24-2022, 09:04 AM	#12
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,283	Re: Wanted Ever find one? I probably have one. Will check this weekend.

02-24-2022, 11:45 AM	#13
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Wanted Yes I did finally end up coming up with one there is a guy on eBay that makes them two OEM specifications the ones you get in the kits are junk the most important thing to remember is don’t loose your original one LMAO Thanks for the offer __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent

03-01-2022, 05:41 PM	#16
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Wanted Thanks, your seller All Powersports Drivetrain - https://www.ebay.com/itm/19239887496...0AAOSw-09aNBZx Quick has them also - https://www.ebay.com/itm/39143528587...EAAOSwYmZXElEz Big difference I see. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-02-2022, 10:49 AM	#17
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Wanted It’s hard to know looking at a picture but the one from Quick looks like they are just stamped steel like the junk that comes in the kits so I went with powersports and its quality __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent Last edited by nsb29; 03-02-2022 at 11:04 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.