"Midnight Rider" 1970 C10 SWB Fleetside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**omodified** · 01-09-2021, 10:21 PM

Back to work! Let's start tearing the front of this thing apart.

Removed front shocks and front shock mounts.

Removed front sway bar and tie rods.

Removed front brake hoses.

Remove front brake drums.

Removed front hubs and brake components.

Removed front backing plates from spindle. Removed front springs. (In disclosure, I was able to remove the front springs so easily at this point because I cut a half coil off when I installed them.)

Removed spindles.

Remove upper control arms.

Removed engine stands.

Removed lower control arms.

01-09-2021, 10:21 PM	#11
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,003	Re: "Midnight Rider" 1970 C10 SWB Fleetside Back to work! Let's start tearing the front of this thing apart. Removed front shocks and front shock mounts. Removed front sway bar and tie rods. Removed front brake hoses. Remove front brake drums. Removed front hubs and brake components. Removed front backing plates from spindle. Removed front springs. (In disclosure, I was able to remove the front springs so easily at this point because I cut a half coil off when I installed them.) Removed spindles. Remove upper control arms. Removed engine stands. Removed lower control arms. __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848 Last edited by omodified; 01-09-2021 at 11:22 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.