SC 1984 C10 parting out* - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 01-31-2010, 08:23 PM

I think it may be the lines at the bottom of this pic, under the switching valve.

*Stitch* · 01-31-2010, 08:37 PM

ok here's the pic...is it the small lines or the long lines...like I said in the pm, 87bob has first dibs on any of this, but if he passes then you'll be next in line...thanks Joe

*Stitch* · 01-31-2010, 08:31 PM

I went out and got the lines and took a pic...have it up in a second

joe231 · 01-31-2010, 08:45 PM

It is the short ones.....
I'm not 100% sure those are like mine though, I'll have to look
thanks!

gcburdic · 01-31-2010, 11:59 PM

Hi Chuck,

Wondering if you'll part with just the front steering linkage....basically I need the center link, but if it'll be easier to pull the outer/ inner tie rods, pitman arm, I'll do that.....shipping to 28031 or if you're headed to the Charlotte area or Myrtle Beach I could meet a somewhere??...Thanks Geoff

*Stitch* · 02-01-2010, 12:09 AM

let me see what I can do with getting it out alone...on May 8th, I'm going to Salisbury, NC for the Gathering of the Goofs for this site...I could bring it with me to that if that's not too far in the future for you...

I just checked and you should be less than an hour from Salisbury...you come swing by and come to the Gathering of the Goofs and get some grub too...

LOL...just checked the RSVP thread and you're on it...so you'll be there...if for some reason you don't make it, me and my family will be at the camp ground some of the day Sunday also before we head back home...

gcburdic · 02-01-2010, 12:17 AM

That would work out great for me....I'm headed there too!!!

Let me know how much Chuck....you coming to Charlotte Auto Fair in April 8-11??

*Stitch* · 02-01-2010, 12:20 AM

nope...our little boy is due to be born at the end of March, so I probably won't be leaving town until the GOTG except to goto Charleston to show him off the family...that's great that your going too...I'm excited about it...we're getting there Friday night and going to rent a cabin Friday and Saturday night...

*Stitch* · 02-02-2010, 08:52 AM

Shamil, I sent your shift indicator out yesterday...sorry for the delay...thanks for the purchase

Chuck.

Shamil · 02-02-2010, 10:57 AM

is the switch valve in good shape? how much do you need for it?

*Stitch* · 02-02-2010, 08:03 PM

Quote:

Originally Posted by Shamil

is the switch valve in good shape? how much do you need for it?

if you're talking about the switch valve for the dual tanks, then 87bob had first dibs on it...He's supposed to be paying me this weekend for it, if he backs out, then it's yours for $15 plus shipping...he's been pretty intent on getting it, so I'm pretty sure he's going to be buying it...

softballnrd27 · 02-02-2010, 12:36 PM

Ok here is what I need, can you give me a package and individual total and what is available:
Driveshaft
All the harware to mount the lights to the core support
Engine compartment wiring harness
Gauge bezel
Outside door locks
I am in Augusta, GA so I won't need shipping

*Stitch* · 02-02-2010, 08:12 PM

Quote:

Originally Posted by softballnrd27

Ok here is what I need, can you give me a package and individual total and what is available:
Driveshaft
All the harware to mount the lights to the core support
Engine compartment wiring harness
Gauge bezel
Outside door locks
I am in Augusta, GA so I won't need shipping

Driveshaft - I have still - $25

hardware for lights - I don't know exactly you want...I have the springs and the buckets that the lights mount into...the adjustment screws were toast, but they're only $2 and change for a pair of them...if there's something I'm missing let me know...$20 for springs and the mounting buckets

Engine harness - I still have - $30 - this mounts to the backside of the fusebox

headlight harness - I still have - $25

gauge bezel - I still have - $30 - this is for an A/C truck and it hasn't been cut for a cd player and has been painted silver

outside door locks - $15 - this includes two factory GM keys

Total $125 - package deal 10% off $112

let me know what you want...this stuff is going pretty fast...thanks man

Chuck.

*Stitch* · 02-07-2010, 02:29 PM

defroster vent pics...$10

I'll have more pics of other stuff up tonight...in the process of taking more stuff off...thanks...

*Stitch* · 02-09-2010, 02:05 AM

ok so I took some more pics of stuff off this truck...it was getting dark, so I had to lighten up some of the pics...as you can see the cab is in excellent shape, no rust at all, just alittle surface rust from where I think the heater core leaked at one time in the pass floor board...I will meet with you up two hours away to deliver this...the cab is stripped and ready to be transferred to my trailer...on to the pics...

*Stitch* · 02-09-2010, 02:08 AM

more....

*Stitch* · 02-09-2010, 02:11 AM

and more...

Pic 3 - Brake pedal assembly $10
Pic 4 - Emergency brake pedal assembly $10
Pic 5 - accelerator pedal assembly $10

softballnrd27 · 02-03-2010, 12:01 AM

Can you get a few close up shots of the gauge bezel? I would like everything but the headlight harness. I already have one.

*Stitch* · 02-03-2010, 12:34 AM

Quote:

Originally Posted by softballnrd27

Can you get a few close up shots of the gauge bezel? I would like everything but the headlight harness. I already have one.

The first pic is of mine on top and my dad's on the bottom....both are for sale, but once one sells, the other is not for sale...I need one of them...the second pic is of my dad's...it's painted silver when the brushed aluminum was...the third pic is of mine...it's been cut for a cd player...there are a couple of small blemishes in the finish...the fourth pic is of the largest of the blemishes...my dad's has no blemishes because it's painted...

my dad's $30
mine $50

joejbal · 02-03-2010, 12:07 PM

what is the status on the steering box?

*Stitch* · 02-03-2010, 08:25 PM

Quote:

Originally Posted by joejbal

what is the status on the steering box?

I can fit it in a large flat rate box through USPS...so it's going to be $30 plus $15 shipping for a total of $45...you can pm me for paypal info...thanks man

Chuck.

benms79 · 02-04-2010, 12:22 AM

how much for steering wheel? 27804

*Stitch* · 02-04-2010, 12:43 AM

Quote:

Originally Posted by benms79

how much for steering wheel? 27804

steering wheel is $20 plus ship...if you want, I'm coming to the gathering of the goofs May 8th up in salisbury, nc...I could meet you up there with it to do away with the shipping or I could ship it...you let me know...thanks man...

Chuck.

benms79 · 02-04-2010, 06:10 AM

Quote:

Originally Posted by Fat Hoe

steering wheel is $20 plus ship...if you want, I'm coming to the gathering of the goofs May 8th up in salisbury, nc...I could meet you up there with it to do away with the shipping or I could ship it...you let me know...thanks man...

Chuck.

ok,got a good pic of it? also interested in door panels top and bottom,pics?

*Stitch* · 02-04-2010, 08:51 AM

I'll get one up tonight when I get home from work...

the upper door panels don't have the strips behind the straps or the straps, they do still have the armrests and pockets that are both in good shape...also, if I remember correctly, the window felt at the top is also in good shape...I'll get pics of those up also...

one of the lower door panel carpet pieces has a hole in it...the chrome strip at the top of the lower panel and the vents in each one are in excellent shape...I can take them off and ship them seperate so it'll be cheaper if you'd like or you can have them whole...or you could pick these up in May also...I'll get pics of them up tonight...thanks man

01-31-2010, 08:23 PM	#1
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1984 C10 parting out* I think it may be the lines at the bottom of this pic, under the switching valve. __________________ *CHEVY ONLY*

01-31-2010, 08:37 PM	#2
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* ok here's the pic...is it the small lines or the long lines...like I said in the pm, 87bob has first dibs on any of this, but if he passes then you'll be next in line...thanks Joe Attached Images

01-31-2010, 08:31 PM	#3
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* I went out and got the lines and took a pic...have it up in a second Last edited by Stitch; 01-31-2010 at 08:35 PM.

01-31-2010, 08:45 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1984 C10 parting out* It is the short ones..... I'm not 100% sure those are like mine though, I'll have to look thanks! __________________ *CHEVY ONLY*

01-31-2010, 11:59 PM	#5
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 1984 C10 parting out* Hi Chuck, Wondering if you'll part with just the front steering linkage....basically I need the center link, but if it'll be easier to pull the outer/ inner tie rods, pitman arm, I'll do that.....shipping to 28031 or if you're headed to the Charlotte area or Myrtle Beach I could meet a somewhere??...Thanks Geoff __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

02-01-2010, 12:09 AM	#6
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* let me see what I can do with getting it out alone...on May 8th, I'm going to Salisbury, NC for the Gathering of the Goofs for this site...I could bring it with me to that if that's not too far in the future for you... I just checked and you should be less than an hour from Salisbury...you come swing by and come to the Gathering of the Goofs and get some grub too... LOL...just checked the RSVP thread and you're on it...so you'll be there...if for some reason you don't make it, me and my family will be at the camp ground some of the day Sunday also before we head back home... Last edited by Stitch; 02-01-2010 at 12:16 AM.

02-01-2010, 12:17 AM	#7
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 1984 C10 parting out* That would work out great for me....I'm headed there too!!! Let me know how much Chuck....you coming to Charlotte Auto Fair in April 8-11?? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

02-01-2010, 12:20 AM	#8
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* nope...our little boy is due to be born at the end of March, so I probably won't be leaving town until the GOTG except to goto Charleston to show him off the family...that's great that your going too...I'm excited about it...we're getting there Friday night and going to rent a cabin Friday and Saturday night...

02-02-2010, 08:52 AM	#9
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Shamil, I sent your shift indicator out yesterday...sorry for the delay...thanks for the purchase Chuck.

02-02-2010, 10:57 AM	#10
Shamil Registered User Join Date: Nov 2006 Location: Amman, Jordan Posts: 121	Re: 1984 C10 parting out* is the switch valve in good shape? how much do you need for it?

02-02-2010, 12:36 PM	#12
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: 1984 C10 parting out* Ok here is what I need, can you give me a package and individual total and what is available: Driveshaft All the harware to mount the lights to the core support Engine compartment wiring harness Gauge bezel Outside door locks I am in Augusta, GA so I won't need shipping __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168 Last edited by softballnrd27; 02-02-2010 at 12:39 PM.

02-07-2010, 02:29 PM	#14
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* defroster vent pics...$10 I'll have more pics of other stuff up tonight...in the process of taking more stuff off...thanks... Attached Images Last edited by Stitch; 02-09-2010 at 02:22 AM.

02-09-2010, 02:05 AM	#15
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* ok so I took some more pics of stuff off this truck...it was getting dark, so I had to lighten up some of the pics...as you can see the cab is in excellent shape, no rust at all, just alittle surface rust from where I think the heater core leaked at one time in the pass floor board...I will meet with you up two hours away to deliver this...the cab is stripped and ready to be transferred to my trailer...on to the pics... Attached Images Last edited by Stitch; 02-09-2010 at 02:06 AM.

02-09-2010, 02:08 AM	#16
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* more.... Attached Images

02-09-2010, 02:11 AM	#17
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* and more... Pic 3 - Brake pedal assembly $10 Pic 4 - Emergency brake pedal assembly $10 Pic 5 - accelerator pedal assembly $10 Attached Images



Register or Log In To remove these advertisements.

02-03-2010, 12:01 AM	#18
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: 1984 C10 parting out* Can you get a few close up shots of the gauge bezel? I would like everything but the headlight harness. I already have one. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

02-03-2010, 12:07 PM	#20
joejbal Registered User Join Date: Oct 2009 Location: Wall, NJ Posts: 64	Re: 1984 C10 parting out* what is the status on the steering box? __________________ Joe

02-04-2010, 12:22 AM	#22
benms79 Registered User Join Date: Sep 2009 Location: rocky mount n.c Posts: 24	Re: 1984 C10 parting out* how much for steering wheel? 27804 __________________ 85 silverado

02-04-2010, 08:51 AM	#25
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* I'll get one up tonight when I get home from work... the upper door panels don't have the strips behind the straps or the straps, they do still have the armrests and pockets that are both in good shape...also, if I remember correctly, the window felt at the top is also in good shape...I'll get pics of those up also... one of the lower door panel carpet pieces has a hole in it...the chrome strip at the top of the lower panel and the vents in each one are in excellent shape...I can take them off and ship them seperate so it'll be cheaper if you'd like or you can have them whole...or you could pick these up in May also...I'll get pics of them up tonight...thanks man

Register or Log In To remove these advertisements.