New 64 Stepper Project - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 10-18-2021, 11:46 AM

Quote:

Originally Posted by Joe Pass

you made a better choice......

Thank you Joe.

**pdxhall** · 10-18-2021, 12:00 PM

That was a good choice. You need to keep the truck and enjoy winning awards.

**The Rocknrod** · 10-23-2021, 06:48 PM

Quote:

Originally Posted by pdxhall

That was a good choice. You need to keep the truck and enjoy winning awards.

Thanks. Speaking of which I went to a show today. Best of show and Ladies Choice.

66C10LB · 10-23-2021, 07:01 PM

Congrats on the show winnings!

**Joe Pass** · 10-23-2021, 10:09 PM

Nice work.....Time for the next one....lol

**The Rocknrod** · 10-23-2021, 11:03 PM

Quote:

Originally Posted by Joe Pass

Nice work.....Time for the next one....lol

Thank you Joe, but this one about wore me out.

88Stanger · 10-25-2021, 05:35 PM

Quote:

Originally Posted by The Rocknrod

So I'm out yesterday cleaning my tires and this guy drives up in a medium blue Z28 1969 Camaro with white stripes and says he wants to trade my truck for his car. I looked at his car and it wasn't as nice. A few things wrong, too loud, console was worn, dash was cut (radio), wrong hoses in engine compartment, A-arms and frame took like they were painted with a corn broom, very dirty engine compartment. He swears it's a numbers matching car but I'll have to pass on this one. Looked like this one:

Damn if i am honest, that would be a tough one. I will say this though, if it is a numbers matching "69 Z28 and it is in running condition, ya not sure i would not have pulled the trigger on this, if i am completely honest. The value of that particular Camaro.... ya i think i would do it depending on it numbers match and not a complete rust bucket.

No matter what, your truck is awesome!

**The Rocknrod** · 10-25-2021, 06:31 PM

Quote:

Originally Posted by 88Stanger

Damn if i am honest, that would be a tough one. I will say this though, if it is a numbers matching "69 Z28 and it is in running condition, ya not sure i would not have pulled the trigger on this, if i am completely honest. The value of that particular Camaro.... ya i think i would do it depending on it numbers match and not a complete rust bucket.

No matter what, your truck is awesome!

Thank you 88Stanger. I'm kind of picky so it needs to be in better condition than that one. I'd be spending even more money just to that one in shape as I would like it. So it's a win for me.

Heck we both win he has the Z/28.

**The Rocknrod** · 10-26-2021, 04:29 PM

Today my task was to cut 1/4 spring off the front springs. I Love It!

SCOTI · 10-26-2021, 04:36 PM

Very nice!

forestb · 10-26-2021, 04:41 PM

I have always felt kind of dumb scheming up ways to lower my truck half an inch more. Now I feel better knowing that I am not the only one.

**The Rocknrod** · 10-26-2021, 04:46 PM

Quote:

Originally Posted by SCOTI

Very nice!

Thanks buddy.

Quote:

Originally Posted by forestb

I have always felt kind of dumb scheming up ways to lower my truck half an inch more. Now I feel better knowing that I am not the only one.

I said screw it, I can always fix it latter. But I'm happy with it now.

**Joe Pass** · 10-26-2021, 10:17 PM

Much better.....

**cwcarpenter98** · 10-26-2021, 11:53 PM

Sweet!

**The Rocknrod** · 10-27-2021, 07:32 AM

Quote:

Originally Posted by Joe Pass

Much better.....

Thank you Joe.

Quote:

Originally Posted by cwcarpenter98

Sweet!

Thanks.

joesscamaro · 10-28-2021, 12:45 PM

I'm definitely liking the new look and ride height.

forestb · 10-28-2021, 01:42 PM

Quote:

Originally Posted by joesscamaro

I'm definitely liking the new look and ride height.

"If you want to change the attitude you need to change the altitude"
-Aaron Kaufman

**The Rocknrod** · 10-28-2021, 01:51 PM

Quote:

Originally Posted by joesscamaro

I'm definitely liking the new look and ride height.

Thanks buddy

Quote:

Originally Posted by forestb

"If you want to change the attitude you need to change the altitude"
-Aaron Kaufman

Thats funny.

**The Rocknrod** · 10-30-2021, 09:26 PM

First Place tonight, there was no BOS.

forestb · 10-30-2021, 09:40 PM

Quote:

Originally Posted by The Rocknrod

First Place tonight, there was no BOS.

Wow you’re really cleaning up

**Joe Pass** · 10-30-2021, 10:19 PM

You hit the "big time"......lol

**The Rocknrod** · 11-02-2021, 01:36 PM

Quote:

Originally Posted by Joe Pass

You hit the "big time"......lol

You know the first show I went to was put on by the Mustang Club of central Texas and they didn't even look at my truck. After I went home I thought I built an albatross. So I guess I was just trying to feel better about it.

Which is funny because when I had the 56 I went to the same type of show in San Diego and all the attendees voted it best in show. Different I guess.

**The Rocknrod** · 11-02-2021, 04:57 PM

I think I have the doors and hood lined up.

jmarkha1 · 11-03-2021, 07:42 AM

That looks aligned to me - in fact it took time to see the join - satisfying job I bet.
That pinstripe between the red and the cream works really well...

**The Rocknrod** · 11-03-2021, 07:58 AM

Quote:

Originally Posted by jmarkha1

That looks aligned to me - in fact it took time to see the join - satisfying job I bet.
That pinstripe between the red and the cream works really well...

Yes it did take time. Thanks.

10-18-2021, 12:00 PM	#577
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,059	Re: New 64 Stepper Project That was a good choice. You need to keep the truck and enjoy winning awards. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

10-23-2021, 07:01 PM	#579
66C10LB Registered User Join Date: Jul 2016 Location: West Kelowna, BC, Canada Posts: 204	Re: New 64 Stepper Project Congrats on the show winnings!

10-23-2021, 10:09 PM	#580
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Nice work.....Time for the next one....lol __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

10-26-2021, 04:29 PM	#584
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Today my task was to cut 1/4 spring off the front springs. I Love It! Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 10-26-2021 at 04:44 PM.

10-26-2021, 04:36 PM	#585
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,910	Re: New 64 Stepper Project Very nice! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-26-2021, 04:41 PM	#586
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,584	Re: New 64 Stepper Project I have always felt kind of dumb scheming up ways to lower my truck half an inch more. Now I feel better knowing that I am not the only one.

10-26-2021, 10:17 PM	#588
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Much better..... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

10-26-2021, 11:53 PM	#589
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: New 64 Stepper Project Sweet! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-28-2021, 12:45 PM	#591
joesscamaro Registered User Join Date: Sep 2008 Location: Newport, North Carolina Posts: 616	Re: New 64 Stepper Project I'm definitely liking the new look and ride height.

10-30-2021, 09:26 PM	#594
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project First Place tonight, there was no BOS. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-30-2021, 10:19 PM	#596
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project You hit the "big time"......lol __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

11-02-2021, 04:57 PM	#598
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I think I have the doors and hood lined up. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

11-03-2021, 07:42 AM	#599
jmarkha1 Registered User Join Date: Jun 2016 Location: Wiltshire / UK Posts: 110	Re: New 64 Stepper Project That looks aligned to me - in fact it took time to see the join - satisfying job I bet. That pinstripe between the red and the cream works really well... __________________ 1965 c10 project - how does all this stuff go back together...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.