Inline Power Steering Bracket Diagram - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 10-26-2016, 03:59 PM

I'm installing a 250 in my truck and also adding power steering to it. Does anyone have a diagram of the power steering setup on an inline motor. This is what I got but can't figure out how it bolts on.

cjrolke · 10-26-2016, 04:40 PM

interested as well I have a 250 with power steering and would like to get that part up and working

SS Tim · 10-26-2016, 05:15 PM

Pictures that should help some.
http://67-72chevytrucks.com/vboard/s...82&postcount=1

Gmc.guy · 10-27-2016, 10:22 AM

This is the bracket shown without a pump. You should have to remove the top alternator bracket you have on your engine now and replace it with the one you got with the new pump

5150 · 10-27-2016, 10:33 AM

Thanks Cody!

RichardJ · 10-27-2016, 01:30 PM

Notice in the link from SSTim, the two damper pulley grooves line up with the water pump pulley grooves like yours.
The GMCguy picture has a damper with wide space between grooves and the outside damper groove lines up with the inside pump groove.
A lot of variables to contend with, but I think all use a double Alt pulley.

5150 · 10-27-2016, 04:34 PM

Well, not quite a fit.

**old51sedan** · 10-27-2016, 06:34 PM

Quote:

Originally Posted by 5150

I'm installing a 250 in my truck and also adding power steering to it. Does anyone have a diagram of the power steering setup on an inline motor. This is what I got but can't figure out how it bolts on.

I just installed PS on my 250. It's hard to see your smaller bracket, but it should bolt on top of the head between the two front head bolts where there is a hole with no bolt and also bolt to one of the bolts on the top side of the water pump. It will sit over the top of the exhaust manifold and right in front of the intake.

**leddzepp** · 10-27-2016, 06:46 PM

Are you sure those are the correct brackets for a non-integrated head? They might be from a later model six cylinder.

**LockDoc** · 10-27-2016, 07:37 PM

-
Flipped GMC.guy's picture. A lot of difference between that bracket and yours....

LockDoc

**70STOVEBOLT** · 10-27-2016, 10:23 PM

Those brackets are for an integrated head 250 I believe.

**'68OrangeSunshine** · 10-27-2016, 10:39 PM

Here's what I bought off a board member, about 20 years ago. He thought they were for a 292 -- since they looked "different" -- but they are for a 250 anyway.
Wonder if I could Make them fit. This particular exhaust is the heavy duty manifold with 3 studs not 2 and cooling fins. Fins interfere with bracket. Might fit w/headers, ya know?
Too late for a refund now.

Gmc.guy · 10-28-2016, 12:14 AM

I have a complete integrated 250 I'll take a pic tomorrow. Maybe we can compare. I know the upper bracket worked when I pieced it together years ago

**70STOVEBOLT** · 10-28-2016, 08:20 AM

Quote:

Originally Posted by '68OrangeSunshine

Here's what I bought off a board member, about 20 years ago. He thought they were for a 292 -- since they looked "different" -- but they are for a 250 anyway.
Wonder if I could Make them fit. This particular exhaust is the heavy duty manifold with 3 studs not 2 and cooling fins. Fins interfere with bracket. Might fit w/headers, ya know?
Too late for a refund now.

These are what mine look like on my '70 with a 250.

10-26-2016, 03:59 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Inline Power Steering Bracket Diagram I'm installing a 250 in my truck and also adding power steering to it. Does anyone have a diagram of the power steering setup on an inline motor. This is what I got but can't figure out how it bolts on. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-26-2016, 04:40 PM	#2
cjrolke Registered User Join Date: Apr 2016 Location: cincinnati oh Posts: 60	Re: Inline Power Steering Bracket Diagram interested as well I have a 250 with power steering and would like to get that part up and working

10-26-2016, 05:15 PM	#3
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,504	Re: Inline Power Steering Bracket Diagram Pictures that should help some. http://67-72chevytrucks.com/vboard/s...82&postcount=1 __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

10-27-2016, 10:22 AM	#4
Gmc.guy Registered User Join Date: Nov 2015 Location: Alberta Posts: 464	Re: Inline Power Steering Bracket Diagram This is the bracket shown without a pump. You should have to remove the top alternator bracket you have on your engine now and replace it with the one you got with the new pump Attached Images __________________ -Cody

10-27-2016, 10:33 AM	#5
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: Inline Power Steering Bracket Diagram Thanks Cody! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-27-2016, 01:30 PM	#6
RichardJ Registered User Join Date: Apr 2010 Location: So Cal Posts: 1,415	Re: Inline Power Steering Bracket Diagram Notice in the link from SSTim, the two damper pulley grooves line up with the water pump pulley grooves like yours. The GMCguy picture has a damper with wide space between grooves and the outside damper groove lines up with the inside pump groove. A lot of variables to contend with, but I think all use a double Alt pulley. __________________ '67 GMC 2500, 292, 4spd, AC

10-27-2016, 04:34 PM	#7
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: Inline Power Steering Bracket Diagram Well, not quite a fit. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-27-2016, 06:46 PM	#9
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: Inline Power Steering Bracket Diagram Are you sure those are the correct brackets for a non-integrated head? They might be from a later model six cylinder. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

10-27-2016, 07:37 PM	#10
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,345	Re: Inline Power Steering Bracket Diagram - Flipped GMC.guy's picture. A lot of difference between that bracket and yours.... LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-27-2016, 10:23 PM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,225	Re: Inline Power Steering Bracket Diagram Those brackets are for an integrated head 250 I believe. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-27-2016, 10:39 PM	#12
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,078	Re: Inline Power Steering Bracket Diagram Here's what I bought off a board member, about 20 years ago. He thought they were for a 292 -- since they looked "different" -- but they are for a 250 anyway. Wonder if I could Make them fit. This particular exhaust is the heavy duty manifold with 3 studs not 2 and cooling fins. Fins interfere with bracket. Might fit w/headers, ya know? Too late for a refund now. Attached Images __________________ Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 10-27-2016 at 10:47 PM.

10-28-2016, 12:14 AM	#13
Gmc.guy Registered User Join Date: Nov 2015 Location: Alberta Posts: 464	Re: Inline Power Steering Bracket Diagram I have a complete integrated 250 I'll take a pic tomorrow. Maybe we can compare. I know the upper bracket worked when I pieced it together years ago __________________ -Cody



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.