What crate motor do you have? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

heathbirkendahl · 10-17-2012, 05:34 PM

Looking at crate motors and power. What's in your C-10?

Thanks,
Heath

flashed · 10-17-2012, 05:40 PM

Im thinking of ordering a 190 HP long block for my 72 ,it has a 100,000 /3yr warranty and thats cheaper that I can have mine rebuilt .And this is from the local Chevrolet dealership for a little over $1450 delivered .

heathbirkendahl · 10-17-2012, 05:42 PM

Quote:

Originally Posted by flashed

Im thinking of ordering a 190 HP long block for my 72 ,it has a 100,000 /3yr warranty and thats cheaper that I can have mine rebuilt .And this is from the local Chevrolet dealership for a little over $1450 delivered .

I like that idea as well. But was looking to get more horsepower.

Wait, did you mean the 290 horse?

tomis blair · 10-17-2012, 06:17 PM

I am going to be getting a 350hp sbc long block from a local shop for $1300, 7year 100,000 mile warranty at the end of the year. Local builder 17year experience builds these all day long and whips them out.

heathbirkendahl · 10-17-2012, 06:45 PM

Quote:

Originally Posted by tomis blair

I am going to be getting a 350hp sbc long block from a local shop for $1300, 7year 100,000 mile warranty at the end of the year. Local builder 17year experience builds these all day long and whips them out.

That's a killer deal. I wish I was closer to Oregon!!

tomis blair · 10-17-2012, 07:03 PM

I was gonna get the 290hp 350 till I saw that on CL. I called him and he can either build me one he already has or rebuild my motor for same price.
Posted via Mobile Device

**LockDoc** · 10-17-2012, 07:53 PM

-
I bought the 260hp 350. I put it in the '69 Burb and it doesn't have any trouble hauling that boat around... $1650 delivered to my door.

LockDoc

PanelDeland · 10-17-2012, 09:20 PM

Look thru the GM performance catalog.I saw a factory 383 listed a while back.Plenty of torque and HP.Used a new block so it could be bore 60 over if ever needed,IIRC the stroke was 3.80 to get the 383.Now if they would just build it in a Ram Jet....

domeier · 10-17-2012, 09:51 PM

I've been super satisfied with the 330hp I have in mine. After 10 years it still runs like brand new. Doesn't burn any oil and doesn't drip it either. Oh, and it goes like hell! I'd love to have some better gas mileage, but I'd also like to be handsome and rich. Guess you can't have your cake and eat it too.

hotrodhomi · 10-17-2012, 10:01 PM

400+ hp crate from yearone. $3200 to my door. Comes dyno'd

AusTx68 · 10-17-2012, 10:05 PM

I picked up a Blueprint Engines 383 from Summit. Came crated as shown. All I needed to do was add a flywheel and accessories. It also came with a dyno sheet showing 407 hp and over 440 lbs torque. No need to break in cam. Paid $4100 on sale. I eventually swapped out the Eddy 750 for a Holley 670 Ultra Street Avenger, added full roller rockers, new valve covers, ceramic headers, and a March serpentine pulley system. I'm very happy with the setup.

With that said, I will say this is my second engine. The first had a problem and BP replaced it. They didn't reimburse installation because I did the install myself. Had it been installed by a shop they would have covered the cost.

67ss&99ss · 10-17-2012, 10:13 PM

I've got an advance auto parts crate 350 in mine. It powered my 67 Camaro for years and now its in my truck. Still running strong and I think it was about $850 bucks when I got it. If I were to get a new motor for it, I would think seriously about that year one motor. 3 grand for 400 hp is pretty good.

ItsRandy · 10-17-2012, 11:02 PM

I got a ZZ502 for mine from the local Chevy dealer. Spent a lot more than the guys in previous posts, however, I am very happy with my choice.

GRX · 10-17-2012, 11:35 PM

Quote:

Originally Posted by tomis blair

I am going to be getting a 350hp sbc long block from a local shop for $1300, 7year 100,000 mile warranty at the end of the year. Local builder 17year experience builds these all day long and whips them out.

That sounds like a great deal. I would choose a hand built one over an assembly line machine built crate engine any day.

heathbirkendahl · 10-18-2012, 12:45 AM

This is all great info everyone. I'm looking at the 330 horse/ 380 torque and the 383. Shooting after the holidays. I will post pics when done.

Please keep posting info and pics. Thanks!!
Posted via Mobile Device

silverbullett · 10-18-2012, 01:05 AM

Quote:

Originally Posted by tomis blair

I am going to be getting a 350hp sbc long block from a local shop for $1300, 7year 100,000 mile warranty at the end of the year. Local builder 17year experience builds these all day long and whips them out.

I'd take that drive for quality like that.

hotrod farm truck · 10-18-2012, 01:33 AM

zz454 12,500 miles so far so good. If you like torque, go big iron.

longorange68 · 10-18-2012, 10:44 AM

Late model vortec from GM Performance parts. I cammed it, changed out the valve springs, and am running a Edelbrock Performer junior intake and Quickfuel 650 Provac carb. Purrs like a kitten, and has waaaay more power than the 250 it replaced.
Posted via Mobile Device

*Fitz* · 10-18-2012, 03:58 PM

Quote:

Originally Posted by heathbirkendahl

Looking at crate motors and power. What's in your C-10?

Thanks,
Heath

The largest big block I could find.....you can never have too much horsepower!

GRX · 10-18-2012, 04:28 PM

DRop one of these puppies in there.

712 cubic inch Big Block Chevy
>> http://youtu.be/1p40_UZlr2A

HARJO · 10-19-2012, 12:02 PM

I've got the RamJet 350, minus the fuel injection.

The PO couldn't figure out how to hook up the fuel injection components, got mad and threw them in a dumpster! So it's got a basic Eddy performer RPM and 1406 carb. Makes great HP & torque. Specs out a few ticks shy of the zz4 according to the GMPP catalog. Would love to find all of the fuel injection parts to put it back together.

Catalog put the price at $6.6k if I remember right.

heathbirkendahl · 10-19-2012, 05:33 PM

Some good looking power plants in this post!

davepl · 10-19-2012, 07:11 PM

I can't throw a rock without hitting a ZZ502 in my shop. But if I was doing it for one of our trucks, and wasn't going to race it, I'd go with the HT502 or whatever GM now calls the "truck" version. Milder cam and cheaper, easier to live with.

The 572s are tempting, but really expensive, and too much cam and carb for a grocery getter. If they sold it with street heads and cam, it'd be cool.

I've probably got $5K into my original 396, which surprised me... that's close to new engine pricing. But then it cost $3K to get the rear end "back to new", so nothing's free.

Here's a pic of a crate ZZ502 short block I run in my '69 Camaro, though everything from the deck upwards is custom or aftermarket (but the ZZ502 bottom end seems indestructible). Next to it is the ZZ502 in my B-body, so as you can see it's all in how you dress them!

*dajn* · 10-19-2012, 10:17 PM

I'm at the same crossroads as you. My 72 c-10 still has the original 350 and i get 12 mpg with an embarrassing amount of power. Tried a different carb but it seems to still struggle plus it leaks oil bad. I suspect burnt valves but i'm far from an expert. Time for a new motor. If i'm going to get 12 MPG, i better have some power
Posted via Mobile Device

Transformula · 10-20-2012, 09:22 PM

I'm thinking of getting one of these. Very good bang for the buck, one year warranty.
http://www.ebay.com/itm/330812199682...84.m1423.l2649

10-17-2012, 05:34 PM	#1
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	What crate motor do you have? Looking at crate motors and power. What's in your C-10? Thanks, Heath __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

10-17-2012, 05:40 PM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: What crate motor do you have? Im thinking of ordering a 190 HP long block for my 72 ,it has a 100,000 /3yr warranty and thats cheaper that I can have mine rebuilt .And this is from the local Chevrolet dealership for a little over $1450 delivered .

10-17-2012, 06:17 PM	#4
tomis blair Registered User Join Date: Apr 2012 Location: grants pass oregon Posts: 40	Re: What crate motor do you have? I am going to be getting a 350hp sbc long block from a local shop for $1300, 7year 100,000 mile warranty at the end of the year. Local builder 17year experience builds these all day long and whips them out.

10-17-2012, 07:03 PM	#6
tomis blair Registered User Join Date: Apr 2012 Location: grants pass oregon Posts: 40	Re: What crate motor do you have? I was gonna get the 290hp 350 till I saw that on CL. I called him and he can either build me one he already has or rebuild my motor for same price. Posted via Mobile Device

10-17-2012, 07:53 PM	#7
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,333	Re: What crate motor do you have? - I bought the 260hp 350. I put it in the '69 Burb and it doesn't have any trouble hauling that boat around... $1650 delivered to my door. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-17-2012, 09:20 PM	#8
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: What crate motor do you have? Look thru the GM performance catalog.I saw a factory 383 listed a while back.Plenty of torque and HP.Used a new block so it could be bore 60 over if ever needed,IIRC the stroke was 3.80 to get the 383.Now if they would just build it in a Ram Jet.... __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-17-2012, 09:51 PM	#9
domeier Registered User Join Date: Sep 2011 Location: San Jose, California Posts: 784	Re: What crate motor do you have? I've been super satisfied with the 330hp I have in mine. After 10 years it still runs like brand new. Doesn't burn any oil and doesn't drip it either. Oh, and it goes like hell! I'd love to have some better gas mileage, but I'd also like to be handsome and rich. Guess you can't have your cake and eat it too.

10-17-2012, 10:01 PM	#10
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: What crate motor do you have? 400+ hp crate from yearone. $3200 to my door. Comes dyno'd __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

10-17-2012, 10:05 PM	#11
AusTx68 Registered User Join Date: Nov 2008 Location: Italy Posts: 1,278	Re: What crate motor do you have? I picked up a Blueprint Engines 383 from Summit. Came crated as shown. All I needed to do was add a flywheel and accessories. It also came with a dyno sheet showing 407 hp and over 440 lbs torque. No need to break in cam. Paid $4100 on sale. I eventually swapped out the Eddy 750 for a Holley 670 Ultra Street Avenger, added full roller rockers, new valve covers, ceramic headers, and a March serpentine pulley system. I'm very happy with the setup. With that said, I will say this is my second engine. The first had a problem and BP replaced it. They didn't reimburse installation because I did the install myself. Had it been installed by a shop they would have covered the cost. __________________ '68 C-10 SWB 383 Stroker (Sold 3/2/2013) '87 R2500 LWB 454 TBI converted to Carb

10-17-2012, 10:13 PM	#12
67ss&99ss Andy Join Date: Feb 2009 Location: Cleveland, GA Posts: 224	Re: What crate motor do you have? I've got an advance auto parts crate 350 in mine. It powered my 67 Camaro for years and now its in my truck. Still running strong and I think it was about $850 bucks when I got it. If I were to get a new motor for it, I would think seriously about that year one motor. 3 grand for 400 hp is pretty good. __________________ 1967 Camaro SS 406\|522hp/514ft lbs\|M20 Muncie\|3.73s\|Posi 1969 CST/10 383\|Aisin AR5 5 speed 1972 K5 350\|Turbo 350 4x4 2005 Duramax 2500HD 4x4

10-17-2012, 11:02 PM	#13
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What crate motor do you have? I got a ZZ502 for mine from the local Chevy dealer. Spent a lot more than the guys in previous posts, however, I am very happy with my choice. Attached Images

10-18-2012, 12:45 AM	#15
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Re: What crate motor do you have? This is all great info everyone. I'm looking at the 330 horse/ 380 torque and the 383. Shooting after the holidays. I will post pics when done. Please keep posting info and pics. Thanks!! Posted via Mobile Device __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

10-18-2012, 01:33 AM	#17
hotrod farm truck Registered User Join Date: Jul 2010 Location: reidsville north carolina Posts: 64	Re: What crate motor do you have? zz454 12,500 miles so far so good. If you like torque, go big iron. Attached Images

10-18-2012, 10:44 AM	#18
longorange68 Registered User Join Date: Apr 2006 Location: Hockinson, Washington Posts: 114	Re: What crate motor do you have? Late model vortec from GM Performance parts. I cammed it, changed out the valve springs, and am running a Edelbrock Performer junior intake and Quickfuel 650 Provac carb. Purrs like a kitten, and has waaaay more power than the 250 it replaced. Posted via Mobile Device __________________ 1968 Chevrolet C-10, 2WD, Longbox, Vortec 350, Monster Transmission 700R4, 3.73 gears Good judgment comes from experience, and experience, well......that comes from bad judgment. 1968 Chevy C-10 "Longshot": Bought used from my Uncle George in 1994 and proceeding to beat the hell out of it for 4 years. Sold it. Bought it back, dumped an ungodly amount of money into it since then.

10-18-2012, 04:28 PM	#20
GRX Registered User Join Date: Jul 2010 Location: MD Posts: 1,937	Re: What crate motor do you have? DRop one of these puppies in there. 712 cubic inch Big Block Chevy >> http://youtu.be/1p40_UZlr2A __________________ 1969 c-10 Step Side Long Bed. I-6 250cid = = 1969 Pontiac GTO hard top. 400, 4-speed.



Register or Log In To remove these advertisements.

10-19-2012, 12:02 PM	#21
HARJO Registered User Join Date: Feb 2011 Location: Las Vegas, NV Posts: 38	Re: What crate motor do you have? I've got the RamJet 350, minus the fuel injection. The PO couldn't figure out how to hook up the fuel injection components, got mad and threw them in a dumpster! So it's got a basic Eddy performer RPM and 1406 carb. Makes great HP & torque. Specs out a few ticks shy of the zz4 according to the GMPP catalog. Would love to find all of the fuel injection parts to put it back together. Catalog put the price at $6.6k if I remember right. __________________ 1968 Chevy C10: 4x4 conversion, 6" lift, 37" GoodYear Military OZ's, carb'd GMPP RamJet 350, Be Cool aluminum radiator, Flex-o-Lite electric fans, March accessory brackets, T350 trans, NP205, 4 wheel disc, fuel cell... etc.

10-19-2012, 05:33 PM	#22
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Re: What crate motor do you have? Some good looking power plants in this post! __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

10-19-2012, 07:11 PM	#23
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: What crate motor do you have? I can't throw a rock without hitting a ZZ502 in my shop. But if I was doing it for one of our trucks, and wasn't going to race it, I'd go with the HT502 or whatever GM now calls the "truck" version. Milder cam and cheaper, easier to live with. The 572s are tempting, but really expensive, and too much cam and carb for a grocery getter. If they sold it with street heads and cam, it'd be cool. I've probably got $5K into my original 396, which surprised me... that's close to new engine pricing. But then it cost $3K to get the rear end "back to new", so nothing's free. Here's a pic of a crate ZZ502 short block I run in my '69 Camaro, though everything from the deck upwards is custom or aftermarket (but the ZZ502 bottom end seems indestructible). Next to it is the ZZ502 in my B-body, so as you can see it's all in how you dress them! Attached Images __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

10-19-2012, 10:17 PM	#24
dajn Account Suspended Join Date: Feb 2011 Location: Ogilvie Minnesota Posts: 461	Re: What crate motor do you have? I'm at the same crossroads as you. My 72 c-10 still has the original 350 and i get 12 mpg with an embarrassing amount of power. Tried a different carb but it seems to still struggle plus it leaks oil bad. I suspect burnt valves but i'm far from an expert. Time for a new motor. If i'm going to get 12 MPG, i better have some power Posted via Mobile Device

10-20-2012, 09:22 PM	#25
Transformula Registered User Join Date: Nov 2010 Location: Las Vegas, Nevada Posts: 160	Re: What crate motor do you have? I'm thinking of getting one of these. Very good bang for the buck, one year warranty. http://www.ebay.com/itm/330812199682...84.m1423.l2649 __________________ T.Y.N Custom Works..... Because "Stock" Sucks! 1971 K 10 GMC Long Bed 1977 Formula T/A Frame off Resto-Mod 1995 FXDL Harley Low Rider 1985 C10 ShortWide 91 Burb front.

Register or Log In To remove these advertisements.