84 GMC 4x4 for sale $500 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wannabeburbowner · 01-03-2005, 06:26 PM

Has a 305/700r4. I think that a rod is knocking in the motor. New towing cam in it (less than 300 miles on valvetrain). Needs new hubs, the automatic locking hubs are broke. The bar in front of the front axle is slightly bent, so that also needs to replaced to be correct. Still driveable. Body isn't the greatest, but it is a great work truck or a truck to play in the woods with. $500 firm. I am in New Philadelphia, OH. May be able to help with delivery some.

Thanks,

Travis

wannabeburbowner · 01-06-2005, 06:46 PM

$400....Must sell

patgizz · 01-06-2005, 11:46 PM

is it full time 4x4 or does it have the shifter for 2 and 4?

also what tranny and how many miles?

wannabeburbowner · 01-07-2005, 03:57 AM

It is not all full time, it has the shifter 2H, N, 4H, 4L. I think that there is around 130,000 miles on the truck. 700r4 tranny, works and shifts fine, could use a filter change (have a filter kit in truck now). The motor is a new re-ring rebuild. I think that a rod is knocking, but doesn't really sound right, possible like a wrist pin knock or something. Motor may have 500 miles on it, cam and lifters, and timing chain have less than 300 miles.

crazykajhun · 01-15-2005, 09:46 AM

I may be interested. However I live in Louisianna. What kind of deal can we work on the delivery.

wannabeburbowner · 01-15-2005, 09:16 PM

That is a long ways away. I can't really do anything at this point in time. All I can say is come get it. Sorry.

Travis

benoit454 · 01-16-2005, 05:40 PM

Travis, why did you answer this yesterday and I've been pming you and called you last night on the monte carlo? What's the deal?????

Old Chevy Lover · 01-22-2005, 12:04 PM

My brother and I might be interested in this for parts. Let me talk to him and I will PM ya.

wannabeburbowner · 01-25-2005, 06:38 PM

Sounds good, need to get this thing out of my yard...could use the money too

goldwing2000 · 01-26-2005, 11:31 PM

Axle ratios?

wannabeburbowner · 01-27-2005, 01:02 AM

I am not exactly sure. I think that they are just 3.42's hardly tachs anything going down the highway.

goldwing2000 · 01-28-2005, 03:46 PM

Check it out when you get a chance. If they're better than 3.42, I might be interested.

benoit454 · 01-29-2005, 06:33 PM

I would just like to say that Travis is a very honest guy, you can trust and beleive him when he tells you stuff that's to the best of his knowledge.

I'm the guy who bought his 85 t top monte carlo ss clone. He's in new philly OH and I'm in Logan wv, and he drove all the way down here to bring me the car. He had to rent and a trailer and all so he's an honest guy big time.

I think he's a realy good seller and a good guy.

Is there a feedback forum on here for seller's and buyers? if so I'll post some good feedback for ya travis.

wannabeburbowner · 01-30-2005, 01:04 AM

Thank you for the kind words Chris (benoit454). Hope you have fun with the monte, I will sure miss that car. I about cried when I was driving away from your house, LOL. Chris is also a very honest guy, sent me money for the delivery, but I didn't get to it till a few weeks later because of all the messed up weather. He didn't have a problem with that at all, very nice guy when I met him, very helpful.

Later,

Travis

*1FaastC10* · 01-30-2005, 01:41 AM

more than likely they're 2.73s or 3.08s at best.

benoit454 · 01-30-2005, 01:31 PM

You know the gear ? is a good one. I always heard ppl say how you can tell but I am not sure. How is it you tell a gear ration in the rear end or front end for that matter?

goldwing2000 · 02-01-2005, 02:26 PM

The easiest way is from the RPO code in the glove box (usually starts with a G) and then checking the chart.
The second easiest way (or if the sticker is missing) is to pull the 6-digit BOM code of the top of the right tube. Usually that code has to be deciphered by a dealer but somebody around here may have the knowledge.
The most difficult (and messiest) way is to pull the cover and count teeth.

You can get a good estimate of what it is by simply rotating the wheels and counting the driveshaft revolutions. I know that's been covered on this message board more than once, so I won't go through the process again.

benoit454 · 02-02-2005, 06:12 PM

That's the way i always heard was counting the teeth never was for sure how you got the gear ratio from counting them though. Any care to explain or link me?

patgizz · 02-02-2005, 07:41 PM

Quote:

Originally Posted by benoit454

That's the way i always heard was counting the teeth never was for sure how you got the gear ratio from counting them though. Any care to explain or link me?

count teeth on ring gear, count teeth on pinion gear, divide.

benoit454 · 02-03-2005, 08:53 PM

Thanks for the info.

Old Chevy Lover · 02-03-2005, 11:33 PM

wannabeburbowner - sent you a PM

wannabeburbowner · 02-04-2005, 10:59 AM

More pictures

wannabeburbowner · 02-07-2005, 06:00 PM

Sold to Old Chevy Lover!!!

01-03-2005, 06:26 PM	#1
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	84 GMC 4x4 for sale $500 Has a 305/700r4. I think that a rod is knocking in the motor. New towing cam in it (less than 300 miles on valvetrain). Needs new hubs, the automatic locking hubs are broke. The bar in front of the front axle is slightly bent, so that also needs to replaced to be correct. Still driveable. Body isn't the greatest, but it is a great work truck or a truck to play in the woods with. $500 firm. I am in New Philadelphia, OH. May be able to help with delivery some. Thanks, Travis Attached Images __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon Last edited by wannabeburbowner; 01-03-2005 at 09:17 PM.

01-06-2005, 06:46 PM	#2
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	$400....Must sell __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-07-2005, 03:57 AM	#4
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	It is not all full time, it has the shifter 2H, N, 4H, 4L. I think that there is around 130,000 miles on the truck. 700r4 tranny, works and shifts fine, could use a filter change (have a filter kit in truck now). The motor is a new re-ring rebuild. I think that a rod is knocking, but doesn't really sound right, possible like a wrist pin knock or something. Motor may have 500 miles on it, cam and lifters, and timing chain have less than 300 miles. __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-15-2005, 09:16 PM	#6
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	That is a long ways away. I can't really do anything at this point in time. All I can say is come get it. Sorry. Travis __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-22-2005, 12:04 PM	#8
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	My brother and I might be interested in this for parts. Let me talk to him and I will PM ya. __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

01-06-2005, 11:46 PM	#3
patgizz Registered User Join Date: Oct 2002 Location: Cleveland, OH Posts: 429	is it full time 4x4 or does it have the shifter for 2 and 4? also what tranny and how many miles?

01-15-2005, 09:46 AM	#5
crazykajhun Registered User Join Date: Jan 2005 Posts: 14	I may be interested. However I live in Louisianna. What kind of deal can we work on the delivery.

01-16-2005, 05:40 PM	#7
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Travis, why did you answer this yesterday and I've been pming you and called you last night on the monte carlo? What's the deal?????

01-25-2005, 06:38 PM	#9
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	Sounds good, need to get this thing out of my yard...could use the money too __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-26-2005, 11:31 PM	#10
goldwing2000 Registered User Join Date: Nov 2004 Location: SE Michigan Posts: 73	Axle ratios? __________________ ~Kane USMC NRA GWRRA AMA Remember: Except for Slavery, Fascism, Nazism, Totalitarianism and Theocracies, WAR HAS NEVER SOLVED ANYTHING!

01-27-2005, 01:02 AM	#11
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	I am not exactly sure. I think that they are just 3.42's hardly tachs anything going down the highway. __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-28-2005, 03:46 PM	#12
goldwing2000 Registered User Join Date: Nov 2004 Location: SE Michigan Posts: 73	Check it out when you get a chance. If they're better than 3.42, I might be interested. __________________ ~Kane USMC NRA GWRRA AMA Remember: Except for Slavery, Fascism, Nazism, Totalitarianism and Theocracies, WAR HAS NEVER SOLVED ANYTHING!

01-29-2005, 06:33 PM	#13
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	I would just like to say that Travis is a very honest guy, you can trust and beleive him when he tells you stuff that's to the best of his knowledge. I'm the guy who bought his 85 t top monte carlo ss clone. He's in new philly OH and I'm in Logan wv, and he drove all the way down here to bring me the car. He had to rent and a trailer and all so he's an honest guy big time. I think he's a realy good seller and a good guy. Is there a feedback forum on here for seller's and buyers? if so I'll post some good feedback for ya travis.

01-30-2005, 01:04 AM	#14
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	Thank you for the kind words Chris (benoit454). Hope you have fun with the monte, I will sure miss that car. I about cried when I was driving away from your house, LOL. Chris is also a very honest guy, sent me money for the delivery, but I didn't get to it till a few weeks later because of all the messed up weather. He didn't have a problem with that at all, very nice guy when I met him, very helpful. Later, Travis __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-30-2005, 01:41 AM	#15
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	more than likely they're 2.73s or 3.08s at best.



Register or Log In To remove these advertisements.

01-30-2005, 01:31 PM	#16
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	You know the gear ? is a good one. I always heard ppl say how you can tell but I am not sure. How is it you tell a gear ration in the rear end or front end for that matter?

02-01-2005, 02:26 PM	#17
goldwing2000 Registered User Join Date: Nov 2004 Location: SE Michigan Posts: 73	The easiest way is from the RPO code in the glove box (usually starts with a G) and then checking the chart. The second easiest way (or if the sticker is missing) is to pull the 6-digit BOM code of the top of the right tube. Usually that code has to be deciphered by a dealer but somebody around here may have the knowledge. The most difficult (and messiest) way is to pull the cover and count teeth. You can get a good estimate of what it is by simply rotating the wheels and counting the driveshaft revolutions. I know that's been covered on this message board more than once, so I won't go through the process again. __________________ ~Kane USMC NRA GWRRA AMA Remember: Except for Slavery, Fascism, Nazism, Totalitarianism and Theocracies, WAR HAS NEVER SOLVED ANYTHING!

02-02-2005, 06:12 PM	#18
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	That's the way i always heard was counting the teeth never was for sure how you got the gear ratio from counting them though. Any care to explain or link me?

02-03-2005, 08:53 PM	#20
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Thanks for the info.

02-03-2005, 11:33 PM	#21
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	wannabeburbowner - sent you a PM __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

02-04-2005, 10:59 AM	#22
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	More pictures Attached Images __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

02-07-2005, 06:00 PM	#23
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	Sold to Old Chevy Lover!!! __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

Register or Log In To remove these advertisements.