Are there any chevy's out there that come from the factory with starter heat shields - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1974ChevyC10 · 06-01-2003, 05:44 PM

after saturdays episode of replacing my starter which got overheated by my headers and quit working-the leading up to it is kinda funny ill tell that part of it later.what im wondering is there a chevy vehicle out there that comes from the factory with a starter heat shield and can they be used on a 350 starter.if so what vehicles do they come on and approx how much does one of these shields cost.thanks in advance guys

**old Rusty C10** · 06-01-2003, 08:11 PM

my buddy has a 1984 or so monte carlo that has a factory heat shield no idea on how much it costs or anything but i know its there i just replaced his starter

sbc350gearhead · 06-01-2003, 08:17 PM

Have you thought about ceramic coated headers or a mini starter?

**N2TRUX** · 06-01-2003, 09:11 PM

The 88-99 trucks came with a small heatshield. Look at Jegs or Summit's site. They should have aftermarket heat shields...

littlebubba · 06-02-2003, 09:51 AM

Most of the early GM stuff (especially Corvettes) that had a 454 engine used a heat shield. Not sure on the trucks, but I would think they did also. Have you checked with the dealer parts man? That would get you started in the right direction. Otherwise, like some else mentioned check with JEGS or Summit. Or if your really handy, fab one up yourself.

gldevall · 06-02-2003, 12:46 PM

Get a piece of sheetmetal and make your own.

1974ChevyC10 · 06-03-2003, 08:22 PM

Quote:

Originally posted by gldevall
Get a piece of sheetmetal and make your own.

considered doing that too-was just asking if there were any chevy's out there that came with them from the factory-it was more a curiousity question than anything

*mike reeh* · 06-03-2003, 11:38 PM

I used to have a factory heat shield I think it came off a vette but not sure what year or engine. I know that doesnt help much

but I recommend an aftermarket heat shield or blanket, they really work

mike

06-01-2003, 05:44 PM	#1
1974ChevyC10 Overworked and Underlaid Join Date: May 2002 Location: Flagstaff,Arizona Posts: 1,279	Are there any chevy's out there that come from the factory with starter heat shields after saturdays episode of replacing my starter which got overheated by my headers and quit working-the leading up to it is kinda funny ill tell that part of it later.what im wondering is there a chevy vehicle out there that comes from the factory with a starter heat shield and can they be used on a 350 starter.if so what vehicles do they come on and approx how much does one of these shields cost.thanks in advance guys __________________ I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP

06-01-2003, 08:11 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,276	my buddy has a 1984 or so monte carlo that has a factory heat shield no idea on how much it costs or anything but i know its there i just replaced his starter __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-01-2003, 09:11 PM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	The 88-99 trucks came with a small heatshield. Look at Jegs or Summit's site. They should have aftermarket heat shields... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

06-02-2003, 09:51 AM	#5
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	Possibilities Most of the early GM stuff (especially Corvettes) that had a 454 engine used a heat shield. Not sure on the trucks, but I would think they did also. Have you checked with the dealer parts man? That would get you started in the right direction. Otherwise, like some else mentioned check with JEGS or Summit. Or if your really handy, fab one up yourself.

06-02-2003, 12:46 PM	#6
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Get a piece of sheetmetal and make your own. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-01-2003, 08:17 PM	#3
sbc350gearhead Registered User Join Date: Mar 2003 Location: Columbus Ohio Posts: 1,413	Have you thought about ceramic coated headers or a mini starter?

06-03-2003, 11:38 PM	#8
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 684	I used to have a factory heat shield I think it came off a vette but not sure what year or engine. I know that doesnt help much but I recommend an aftermarket heat shield or blanket, they really work mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.