1986 Chevy P30 Motorhome Fuel Gauge Wiring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bhfisher · 05-08-2013, 04:20 PM

I change out the ignition switch on the old motorhome on my 1986 Fleetwood Bounder. This is a GM/Chevy P-30 truck chassis.

After I was done, I notice the fuel gauge now reads empty. Removing the sensing wire from the back of gauge makes it read full.

So, it appears I have a short towards the fuel sender somewhere. The wire is 'pink' at the gauge. I followed as far as I could towards the fuse block and then it disappears.

I don't if anyone has experience with this on a motorhome, but thought I'd ask anyways

Bart

05-08-2013, 04:20 PM	#1
bhfisher Registered User Join Date: May 2013 Location: Buena Park, CA Posts: 1	1986 Chevy P30 Motorhome Fuel Gauge Wiring I change out the ignition switch on the old motorhome on my 1986 Fleetwood Bounder. This is a GM/Chevy P-30 truck chassis. After I was done, I notice the fuel gauge now reads empty. Removing the sensing wire from the back of gauge makes it read full. So, it appears I have a short towards the fuel sender somewhere. The wire is 'pink' at the gauge. I followed as far as I could towards the fuse block and then it disappears. I don't if anyone has experience with this on a motorhome, but thought I'd ask anyways Bart



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.