4 speed setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

busterwivell · 10-01-2003, 04:40 PM

Complete, shifter, crossmember, clutch, tranny, pedal, EVERYTHING. It's taking up valuable space in my garage. Someone must want it. I'm going to have to put it outside soon if someone doesn't want it.

Alvin · 10-01-2003, 04:56 PM

Let me talk to my dad, he lives out there in Tucson too. I'm sure he could hold on to it for me for a little while. I'll get back to you!

bad 71 chevy · 10-01-2003, 07:33 PM

What kind of tranny and how much for the setup

busterwivell · 10-01-2003, 09:11 PM

I don't know, Granny 4 speed, make an offer for everything to get it out of the garage.......I want it gone!

Canada20 · 10-03-2003, 01:28 PM

if memory serves, that's from a BB block which means a different trans crossmember than for SB or I6 trucks. If you're doing a conversion and want it "as stock" that would be a good piece to get ahold of.

Greg

stepn67 · 10-03-2003, 01:41 PM

Is this the crossmember that attaches to the tail of the tranny or at the bellhousing?

busterwivell · 10-03-2003, 11:22 PM

Do you want to come look? I'm thinking, I've posted this several times, no one seems to want it, I'll take it to the metal scrap dealer next week and sell it by the pound.

MOTHERTRUCKERS · 10-04-2003, 09:53 PM

scrap price around $3.00.

busterwivell · 10-05-2003, 08:16 AM

Value to others, zero
space freed up in shop, priceless

Canada20 · 10-05-2003, 11:13 AM

I would've paid a few bucks for that crossmember awhile back when I was still going to do my big block converson.

Greg

ole yeller · 10-06-2003, 02:48 PM

Busterwivell,

Are these parts still available ???

Thanks Ole Yeller

busterwivell · 10-06-2003, 03:52 PM

Yes

ole yeller · 10-06-2003, 04:13 PM

Did it by chance come off of a BB truck as Canada20 stated above?

If so how much do you have to have for it?

Thanks

busterwivell · 10-06-2003, 04:52 PM

Yes, my truck is a 402, was 4 speed, now 700R4. Are you interested in the whole setup?

ole yeller · 10-06-2003, 05:45 PM

I am really only interested in the X-member. The transmission would be too costly to ship this far. I have a 71 SWB that had a transplanted 305/4 spd and I have put a 402 in the truck now. Everything is in the truck and ready to run except the crossmember won't bolt up like it should. I have all the parts for an auto conversion but would like to keep the manual as I just spent $150 to surface flywheel,new pressureplate, clutchdisk,and throwout bearing. I also have a couple parts trucks if there are any parts you may be looking for and would consider a trade?

Steve

ole yeller · 10-07-2003, 11:43 AM

TTT

busterwivell · 10-07-2003, 11:59 AM

I'm not inclined to sell just the crossmember. Then I'd be left with a complete changeover EXCEPT the crossmember. You are probably right, the trans shipping would be a killer. If someone wanted everything else, and all I'd have left would be the crossmember, then I'd be more willing. Or, if someone wanted everything except the trans, I'd break it up that way.

Bill

ole yeller · 10-07-2003, 01:08 PM

How much do you want for the whole set-up???

busterwivell · 10-07-2003, 09:36 PM

OK, I'm trying to be fair here........I asked $300.00 obo for everything. I called around and found a crossmember from a BB/4 speed truck for 60.00 from a salvage yard. I'll do that if you want, or, if you want, I'll give you the name, address and phone number of the yard that has it. Is that fair?

ole yeller · 10-07-2003, 11:00 PM

Bill,
That sounds fair! Will you email me a phone # and a convenient time to call. I will call you to talk about it. I talk better than I type. Thanks for your help and patience.

Steve

10-01-2003, 04:40 PM	#1
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	4 speed setup Complete, shifter, crossmember, clutch, tranny, pedal, EVERYTHING. It's taking up valuable space in my garage. Someone must want it. I'm going to have to put it outside soon if someone doesn't want it. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

10-01-2003, 04:56 PM	#2
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Let me talk to my dad, he lives out there in Tucson too. I'm sure he could hold on to it for me for a little while. I'll get back to you! __________________ Ethel - The Legend Continues... Ethel has been sold.

10-01-2003, 07:33 PM	#3
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	What kind of tranny and how much for the setup __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

10-01-2003, 09:11 PM	#4
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	I don't know, Granny 4 speed, make an offer for everything to get it out of the garage.......I want it gone! __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

10-03-2003, 01:28 PM	#5
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	if memory serves, that's from a BB block which means a different trans crossmember than for SB or I6 trucks. If you're doing a conversion and want it "as stock" that would be a good piece to get ahold of. Greg __________________ No such thing as a stupid question, right?

10-03-2003, 01:41 PM	#6
stepn67 Junior Member Join Date: Dec 2002 Location: Tucson, AZ Posts: 140	Is this the crossmember that attaches to the tail of the tranny or at the bellhousing?

10-03-2003, 11:22 PM	#7
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Do you want to come look? I'm thinking, I've posted this several times, no one seems to want it, I'll take it to the metal scrap dealer next week and sell it by the pound. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

10-04-2003, 09:53 PM	#8
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	scrap price around $3.00. __________________ Rest in Peace Ed. Thanks for all the good times.

10-05-2003, 08:16 AM	#9
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Value to others, zero space freed up in shop, priceless __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

10-05-2003, 11:13 AM	#10
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	I would've paid a few bucks for that crossmember awhile back when I was still going to do my big block converson. Greg __________________ No such thing as a stupid question, right?

10-06-2003, 02:48 PM	#11
ole yeller Junior Member Join Date: Jan 2001 Location: Pocatello, Idaho Posts: 61	Busterwivell, Are these parts still available ??? Thanks Ole Yeller

10-06-2003, 03:52 PM	#12
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Yes __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

10-06-2003, 04:13 PM	#13
ole yeller Junior Member Join Date: Jan 2001 Location: Pocatello, Idaho Posts: 61	Did it by chance come off of a BB truck as Canada20 stated above? If so how much do you have to have for it? Thanks

10-06-2003, 04:52 PM	#14
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Yes, my truck is a 402, was 4 speed, now 700R4. Are you interested in the whole setup? __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

10-06-2003, 05:45 PM	#15
ole yeller Junior Member Join Date: Jan 2001 Location: Pocatello, Idaho Posts: 61	I am really only interested in the X-member. The transmission would be too costly to ship this far. I have a 71 SWB that had a transplanted 305/4 spd and I have put a 402 in the truck now. Everything is in the truck and ready to run except the crossmember won't bolt up like it should. I have all the parts for an auto conversion but would like to keep the manual as I just spent $150 to surface flywheel,new pressureplate, clutchdisk,and throwout bearing. I also have a couple parts trucks if there are any parts you may be looking for and would consider a trade? Steve



Register or Log In To remove these advertisements.

10-07-2003, 11:43 AM	#16
ole yeller Junior Member Join Date: Jan 2001 Location: Pocatello, Idaho Posts: 61	TTT

10-07-2003, 11:59 AM	#17
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	I'm not inclined to sell just the crossmember. Then I'd be left with a complete changeover EXCEPT the crossmember. You are probably right, the trans shipping would be a killer. If someone wanted everything else, and all I'd have left would be the crossmember, then I'd be more willing. Or, if someone wanted everything except the trans, I'd break it up that way. Bill __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

10-07-2003, 01:08 PM	#18
ole yeller Junior Member Join Date: Jan 2001 Location: Pocatello, Idaho Posts: 61	How much do you want for the whole set-up???

10-07-2003, 09:36 PM	#19
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	OK, I'm trying to be fair here........I asked $300.00 obo for everything. I called around and found a crossmember from a BB/4 speed truck for 60.00 from a salvage yard. I'll do that if you want, or, if you want, I'll give you the name, address and phone number of the yard that has it. Is that fair? __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

10-07-2003, 11:00 PM	#20
ole yeller Junior Member Join Date: Jan 2001 Location: Pocatello, Idaho Posts: 61	Bill, That sounds fair! Will you email me a phone # and a convenient time to call. I will call you to talk about it. I talk better than I type. Thanks for your help and patience. Steve Last edited by ole yeller; 10-07-2003 at 11:12 PM.

Register or Log In To remove these advertisements.