Parting out 70 C-10 LWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oteixeira · 11-04-2003, 06:06 PM

Ok guys,

Let me know what you need...some of the stuff I know I have..

**Edited for sold items**

>P/S pump w/ sb brakets -$50
>unmolested dash - $50
>6 lug rallies w/ Bridgestone Deulers (deep 4x4 kind), 2 center caps, 4 trim rings $150
>Radiator Suport to Grill braket $10
>A/M Radio $15
>Cab /title usual rust - $150
>Headers - $15
>New black Alt. brakets for S/B - $20
>New one wire alternator kit - $15
>ARP Kit for block to trany (stud kit, new) $10
>Inner fender (Drivers) - $20
>Both Fenders some rust on bottom - $40

Orlando
(All parts located in Eastern NC)

Husker · 11-04-2003, 06:23 PM

What kind of shape is the Heater control In? If it is good shape levers not cracked or bent I will take it.
Thanks
Ron
4huskrs@charter.net

**BIG ORANGE** · 11-04-2003, 06:55 PM

How close are ya to Charlotte or Raligh. What color is interior piece's.Might be interested in a couple thinks.

skokie · 11-04-2003, 07:09 PM

When you say dash are you referring to the entire piece including the glovebox? If so would you be willing to cut it at the window? Any rust on it?
Can you post a pic?

Thanks

oteixeira · 11-04-2003, 07:32 PM

Husker,
I think it is in god condition, I will look tonight.

Big Orange,
I work in Raleigh every day, I am 4 hours from Charlotte, and 2 hours north of the SC border right off of 95.

skokie,
I am talking the whole dash, it is already removed from the cab. But there is no glovebox. Do you need the glovebox, or glovebox door, cause I have a spare set of those too. If you need pics, PM me with your email addy, I don't have a good web provider to post pics with.

Thanks,

Orlando

skokie · 11-04-2003, 07:37 PM

Pm sent.

zombie69 · 11-04-2003, 08:20 PM

please e-mail me a pic of the outter grill
thomasg761@yahoo.com

70ChevyLongbed · 11-04-2003, 08:24 PM

Orlando,

What motor did you have? I have the same truck with a '68 307 that I'm rebuilding. I'm having problems with the water pump on it, and I'm interested in the Alt. Brackets.

Thanks.

padreisla · 11-04-2003, 08:34 PM

Yes also interested in what engine was in it, I just put a new 454 4bolt in my 67 and am looking for a HEI Distributor setup for it.

Thanks....Joey

mitch199 · 11-04-2003, 09:16 PM

What condition is the cab in?? Where is the rust located??

oteixeira · 11-04-2003, 09:33 PM

Mitch199,
PM me your e-mail and I will send pics.

Zombie,
Pics coming soon.

Joey and 70 ChevyLongbed,
It was a I-6 3 speed. I got brand new brackets for a short waterpump setup on teh right hand side (true to the original setup on these trucks). The HEI is out an '80 Z-28 with a 350, so really nothing to do with the trucks...

Orlando

Larry68GMC · 11-05-2003, 12:02 AM

Can you get the numbers off the Holley carb and some pics if possible....Thanks

Tx Firefighter · 11-05-2003, 12:37 AM

Guys, that HEI will fit a 454 . Big block and small block distributors are the same. The only exclusion is tall deck 366 and 427 big block engines.

Husker · 11-08-2003, 01:25 AM

oteixeira
Have ya checked the Heater control out? Am interested. Thanks
Ron

oteixeira · 11-08-2003, 01:13 PM

Ron,

Other then needing some polish, they are in good shape. PM me with your address so I can figure out shipping to you.

Orlando

padreisla · 11-08-2003, 11:31 PM

oteixeira, I will take the HEI Distributor if it is still available. Is it complete with wires and all? Shipping is to 33617, so if you can get me a total and also how do you want payment.

Also Tx Firefighter, thanks for the information about the distributor, I am learing something new everyday from this forum.

Thanks...Joey

70ChevyLongbed · 11-10-2003, 11:29 AM

Orlando,

I found out that those brackets won't work with a V8. Thanks though!

11-04-2003, 06:06 PM	#1
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Parting out 70 C-10 LWB Ok guys, Let me know what you need...some of the stuff I know I have.. Edited for sold items >P/S pump w/ sb brakets -$50 >unmolested dash - $50 >6 lug rallies w/ Bridgestone Deulers (deep 4x4 kind), 2 center caps, 4 trim rings $150 >Radiator Suport to Grill braket $10 >A/M Radio $15 >Cab /title usual rust - $150 >Headers - $15 >New black Alt. brakets for S/B - $20 >New one wire alternator kit - $15 >ARP Kit for block to trany (stud kit, new) $10 >Inner fender (Drivers) - $20 >Both Fenders some rust on bottom - $40 Orlando (All parts located in Eastern NC) __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251 Last edited by oteixeira; 11-10-2003 at 12:49 PM.

11-04-2003, 06:23 PM	#2
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	What kind of shape is the Heater control In? If it is good shape levers not cracked or bent I will take it. Thanks Ron 4huskrs@charter.net __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

11-04-2003, 06:55 PM	#3
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	How close are ya to Charlotte or Raligh. What color is interior piece's.Might be interested in a couple thinks. __________________ Things happen for a reason!

11-04-2003, 07:32 PM	#5
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Replies Husker, I think it is in god condition, I will look tonight. Big Orange, I work in Raleigh every day, I am 4 hours from Charlotte, and 2 hours north of the SC border right off of 95. skokie, I am talking the whole dash, it is already removed from the cab. But there is no glovebox. Do you need the glovebox, or glovebox door, cause I have a spare set of those too. If you need pics, PM me with your email addy, I don't have a good web provider to post pics with. Thanks, Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

11-04-2003, 08:20 PM	#7
zombie69 Registered User Join Date: Sep 2003 Location: memphis Posts: 38	please e-mail me a pic of the outter grill thomasg761@yahoo.com __________________ 1969 chevy c/10 lwb 250 six 3 on the floor

11-04-2003, 07:09 PM	#4
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	When you say dash are you referring to the entire piece including the glovebox? If so would you be willing to cut it at the window? Any rust on it? Can you post a pic? Thanks

11-04-2003, 07:37 PM	#6
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	Pm sent.

11-04-2003, 08:24 PM	#8
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,266	Orlando, What motor did you have? I have the same truck with a '68 307 that I'm rebuilding. I'm having problems with the water pump on it, and I'm interested in the Alt. Brackets. Thanks. __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

11-04-2003, 08:34 PM	#9
padreisla Registered User Join Date: Jan 2003 Location: Tampa, Florida Posts: 141	HEI Deistributor Yes also interested in what engine was in it, I just put a new 454 4bolt in my 67 and am looking for a HEI Distributor setup for it. Thanks....Joey __________________ 67 C20 LWB 454 BB THD 400 97 Jeep Wrangler 4cyl 5sp

11-04-2003, 09:16 PM	#10
mitch199 Registered User Join Date: Jun 2002 Location: Rochester, Michigan Posts: 15	Cab What condition is the cab in?? Where is the rust located??

11-04-2003, 09:33 PM	#11
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	More Replies Mitch199, PM me your e-mail and I will send pics. Zombie, Pics coming soon. Joey and 70 ChevyLongbed, It was a I-6 3 speed. I got brand new brackets for a short waterpump setup on teh right hand side (true to the original setup on these trucks). The HEI is out an '80 Z-28 with a 350, so really nothing to do with the trucks... Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

11-05-2003, 12:02 AM	#12
Larry68GMC Registered User Join Date: Aug 2001 Location: Midwest City, OK Posts: 289	Can you get the numbers off the Holley carb and some pics if possible....Thanks __________________ 71 GMC LWB 350, Dart Pro1's 200/64cc,10.2:1 RPM AirGap, 224/234 @50 496/518 lift w/1.6 roller rockers, 2500 stall '05 Dodge 2500 Crew Cab 4x4, 4 inch lift and 35's CTD

11-05-2003, 12:37 AM	#13
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Guys, that HEI will fit a 454 . Big block and small block distributors are the same. The only exclusion is tall deck 366 and 427 big block engines. __________________ I'm on the Instagram- @Gearhead_Kevin

11-08-2003, 01:25 AM	#14
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	oteixeira Have ya checked the Heater control out? Am interested. Thanks Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

11-08-2003, 01:13 PM	#15
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Heater controls Ron, Other then needing some polish, they are in good shape. PM me with your address so I can figure out shipping to you. Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251



Register or Log In To remove these advertisements.

11-08-2003, 11:31 PM	#16
padreisla Registered User Join Date: Jan 2003 Location: Tampa, Florida Posts: 141	HEI Distributor oteixeira, I will take the HEI Distributor if it is still available. Is it complete with wires and all? Shipping is to 33617, so if you can get me a total and also how do you want payment. Also Tx Firefighter, thanks for the information about the distributor, I am learing something new everyday from this forum. Thanks...Joey __________________ 67 C20 LWB 454 BB THD 400 97 Jeep Wrangler 4cyl 5sp

11-10-2003, 11:29 AM	#17
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,266	Orlando, I found out that those brackets won't work with a V8. Thanks though! __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

Register or Log In To remove these advertisements.