67-72 Auto Crossmember ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Tim Christian** · 02-11-2021, 03:59 PM

I should know this but I am brain farting I just put a auto crossmember in a 2 wheel drive I am changing from manual to auto. My question is are they a front and rear to the crossmember? I swear when I look at it. It looks like it is angled toward the front of the truck. Maybe just getting old and eyes getting bad. It does have two holes on one side with brackets and nothing on the other?

I Have No Idea · 02-11-2021, 04:31 PM

dont know if this helps but here is mine going back together.

**uncle** · 02-11-2021, 06:42 PM

I don’t think it matters but I have one here that has one hole in the back. Some of the trucks that had turbo 400 had two brackets on the back that held part of the emergency brake cable if I remember correctly.

**uncle** · 02-11-2021, 06:44 PM

Here ya go.

**LockDoc** · 02-12-2021, 12:57 AM

-
I think they angle down a little toward the rear because of the angle of the engine/transmission. I don't know if this thread will help any or not because it is mainly about the difference in the TH350 and TH400 ones.

http://67-72chevytrucks.com/vboard/s....php?p=2181366

LockDoc

68 TT · 02-15-2021, 05:27 PM

Quote:

Originally Posted by uncle

I don’t think it matters but I have one here that has one hole in the back. Some of the trucks that had turbo 400 had two brackets on the back that held part of the emergency brake cable if I remember correctly.

Both of my 67-72 T-400 trucks and my T-400 Suburban had the two rear cable guide bracket crossmembers.

68Gold/white · 02-15-2021, 10:19 PM

Cool, I’m not sure if I’ve ever see those cable guide brackets, on ANYof the pickups I’ve seen or worked on!
Thanks!

02-11-2021, 03:59 PM	#1
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	67-72 Auto Crossmember ? I should know this but I am brain farting I just put a auto crossmember in a 2 wheel drive I am changing from manual to auto. My question is are they a front and rear to the crossmember? I swear when I look at it. It looks like it is angled toward the front of the truck. Maybe just getting old and eyes getting bad. It does have two holes on one side with brackets and nothing on the other?

02-11-2021, 04:31 PM	#2
I Have No Idea Registered User Join Date: Oct 2015 Location: Peoria, AZ Posts: 67	Re: 67-72 Auto Crossmember ? dont know if this helps but here is mine going back together. Attached Images __________________ 69 C10 All new build with Patina Body

02-11-2021, 06:42 PM	#3
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: 67-72 Auto Crossmember ? I don’t think it matters but I have one here that has one hole in the back. Some of the trucks that had turbo 400 had two brackets on the back that held part of the emergency brake cable if I remember correctly. Attached Images

02-11-2021, 06:44 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: 67-72 Auto Crossmember ? Here ya go. Attached Images

02-12-2021, 12:57 AM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,352	Re: 67-72 Auto Crossmember ? - I think they angle down a little toward the rear because of the angle of the engine/transmission. I don't know if this thread will help any or not because it is mainly about the difference in the TH350 and TH400 ones. http://67-72chevytrucks.com/vboard/s....php?p=2181366 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

02-15-2021, 10:19 PM	#7
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,298	Re: 67-72 Auto Crossmember ? Cool, I’m not sure if I’ve ever see those cable guide brackets, on ANYof the pickups I’ve seen or worked on! Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.