Blasphemy to the Chevy world - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spray-Bomb · 04-07-2009, 09:55 PM

Hey guys, I know some of yall are gonna give me crap for this & others will enjoy it cuz its cool

Well Im prolly gonna start working on my 50 Ford F-1 to have a putter to drive that is cool & gets decent MPG

I was wondering if any of yall had worked on one of these pickups & mainly if you know anything about putting one on a S-10 frame or clipping the Ford frame with the S-10 front clip ???

Here is a pic of it

Bus Ted Knuckle · 04-07-2009, 10:40 PM

I know they use a long wheel base regular cab s10 frame under AD chevy trucks all the time. That might work for you too. a Dodge dakota might be a good donor too. Might want to take a tape measure to a wrecking yard and see what you find. I have three of those trucks, two 1/2 tons and a 2 ton, I can tell you that clipping with an s10 frame will be a challenge, there are some differences in width.

jeffspower · 04-07-2009, 10:46 PM

Brings back memories. I used to have a '50 F4 dually rollin on 18's. And not the type you see today either

OARNGESI · 04-08-2009, 07:51 AM

Nice new project

70k52wd · 04-08-2009, 08:35 AM

Those are cool trucks. Good luck with your project.

panhandler62 · 04-08-2009, 11:23 AM

When I was in HS I had a friend who's dad had a 68 Ford long bed with a race bred (I mean litteraly came out of an 8 second T-Bird) 396 stuffed in it.

We're not talking '61 Vettes here -- cross polinate till it's cool.

Spray-Bomb · 04-09-2009, 05:16 PM

Thanks guys, I know of a few S-10s around here that some of my buddys have that I can get for a song, so Ima go measure on them & see what I need exactly

I may find that I just wanna build new body mounts & use the S-10 frame, but there is still the option of clipping it if that is too much of a chore (which I doubt it is)

Cool thing is, where I work we have all kinds of bad ass tools to make stuff for it

Need to patch the floor & put in a new battery box & I bought a fuel tank today (not permanent, but will work for a while) then once I get the cab on the frame Ima Z it to make it low & then I can get my engine & trans mounts made & put the rest of teh body on

Ima wire it from scratch too

**special-K** · 04-09-2009, 08:57 PM

Isn`t that blasphemy to the Ford world and yet another convert to the Chevy world?Welcome brother ford.We forgive all sins.

My cousin ran one for years.I like anything that old.

***Liz*** · 04-10-2009, 07:46 AM

Quote:

Originally Posted by special-K

I like anything that old.

pretty much

rod86 · 04-11-2009, 12:45 AM

that looks like a kool project, you going to run the s10 motor/ trans?

Spray-Bomb · 04-11-2009, 01:17 AM

Nope, Ford 300 I-6 & 4-speed

rod86 · 04-11-2009, 01:36 AM

nice...

msgross · 04-11-2009, 08:14 AM

Quote:

Originally Posted by Spray-Bomb

Hey guys, I know some of yall are gonna give me crap for this & others will enjoy it cuz its cool

Don't worry.. I never mind seeing a rusty Ford!

Those are pretty cool body styles though...

Skirkpat · 04-13-2009, 02:14 PM

I would check to see if a 66-72 Chevelle or 70-81 camaro, or an old Volares if I am not mistaken,front end would not work a little better. I think the frame is alot narrower on the S-10 and does not match up as well, I know that they are not as beefy either, Grab the 10 or 12 bolt also? Old Ford trucks kick @$$ by the way..All cars are Cool, some just are cooler than others.

NOW THIS MAY BE CONSIDERED BLASPHEMY? HeHeHee , LOL

**special-K** · 04-13-2009, 03:12 PM

My neighbor put a 350 in a`77 Ford Explorer that appeared totally stock with whitewalls,wheelcovers,gold paint.That was one good running Ford.

Skirkpat · 04-13-2009, 03:23 PM

Quote:

Originally Posted by special-K

My neighbor put a 350 in a`77 Ford Explorer that appeared totally stock with whitewalls,wheelcovers,gold paint.That was one good running Ford.

I just put my spare 350 in my Suburban to get it moving this Summer, I was toying with the I dea of throwing it in there to carry the theme a little farther

**70C10Toejam** · 04-19-2009, 12:13 AM

I like those old body styles too. I know a guy around here who has a F100 unibody as the next project.

thirdstreettito · 04-26-2009, 02:00 PM

Ranger frame?

JJ · 07-19-2009, 06:48 PM

Did you ever find out if you could put an S-10 frame under your truck?

dammitmitchell · 07-19-2009, 09:18 PM

at least you are working of when fords cared about quality...
i would rock the crap out of that ford..
i wouldnt care... because back then they were built worth a crap..!

04-07-2009, 09:55 PM	#1
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Blasphemy to the Chevy world Hey guys, I know some of yall are gonna give me crap for this & others will enjoy it cuz its cool Well Im prolly gonna start working on my 50 Ford F-1 to have a putter to drive that is cool & gets decent MPG I was wondering if any of yall had worked on one of these pickups & mainly if you know anything about putting one on a S-10 frame or clipping the Ford frame with the S-10 front clip ??? Here is a pic of it __________________ Just not low enough... ----------------------------- Sinister Killer

04-07-2009, 10:40 PM	#2
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: Blasphemy to the Chevy world I know they use a long wheel base regular cab s10 frame under AD chevy trucks all the time. That might work for you too. a Dodge dakota might be a good donor too. Might want to take a tape measure to a wrecking yard and see what you find. I have three of those trucks, two 1/2 tons and a 2 ton, I can tell you that clipping with an s10 frame will be a challenge, there are some differences in width. __________________ Bill BEATERS ARE NEATER

04-07-2009, 10:46 PM	#3
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Blasphemy to the Chevy world Brings back memories. I used to have a '50 F4 dually rollin on 18's. And not the type you see today either __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

04-08-2009, 07:51 AM	#4
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Blasphemy to the Chevy world Nice new project __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

04-08-2009, 08:35 AM	#5
70k52wd Blaze-Air Join Date: Nov 2008 Location: Virginia Posts: 1,117	Re: Blasphemy to the Chevy world Those are cool trucks. Good luck with your project.

04-08-2009, 11:23 AM	#6
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Re: Blasphemy to the Chevy world When I was in HS I had a friend who's dad had a 68 Ford long bed with a race bred (I mean litteraly came out of an 8 second T-Bird) 396 stuffed in it. We're not talking '61 Vettes here -- cross polinate till it's cool. __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

04-09-2009, 05:16 PM	#7
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Blasphemy to the Chevy world Thanks guys, I know of a few S-10s around here that some of my buddys have that I can get for a song, so Ima go measure on them & see what I need exactly I may find that I just wanna build new body mounts & use the S-10 frame, but there is still the option of clipping it if that is too much of a chore (which I doubt it is) Cool thing is, where I work we have all kinds of bad ass tools to make stuff for it Need to patch the floor & put in a new battery box & I bought a fuel tank today (not permanent, but will work for a while) then once I get the cab on the frame Ima Z it to make it low & then I can get my engine & trans mounts made & put the rest of teh body on Ima wire it from scratch too __________________ Just not low enough... ----------------------------- Sinister Killer

04-09-2009, 08:57 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Blasphemy to the Chevy world Isn`t that blasphemy to the Ford world and yet another convert to the Chevy world?Welcome brother ford.We forgive all sins. My cousin ran one for years.I like anything that old. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-11-2009, 12:45 AM	#10
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: Blasphemy to the Chevy world that looks like a kool project, you going to run the s10 motor/ trans? __________________ rod 86 chevy c10 silverado

04-11-2009, 01:17 AM	#11
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Blasphemy to the Chevy world Nope, Ford 300 I-6 & 4-speed __________________ Just not low enough... ----------------------------- Sinister Killer

04-11-2009, 01:36 AM	#12
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: Blasphemy to the Chevy world nice... __________________ rod 86 chevy c10 silverado

04-13-2009, 02:14 PM	#14
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Blasphemy to the Chevy world I would check to see if a 66-72 Chevelle or 70-81 camaro, or an old Volares if I am not mistaken,front end would not work a little better. I think the frame is alot narrower on the S-10 and does not match up as well, I know that they are not as beefy either, Grab the 10 or 12 bolt also? Old Ford trucks kick @$$ by the way..All cars are Cool, some just are cooler than others. NOW THIS MAY BE CONSIDERED BLASPHEMY? HeHeHee , LOL Attached Images Last edited by Skirkpat; 04-13-2009 at 02:17 PM.

04-13-2009, 03:12 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Blasphemy to the Chevy world My neighbor put a 350 in a`77 Ford Explorer that appeared totally stock with whitewalls,wheelcovers,gold paint.That was one good running Ford. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-19-2009, 12:13 AM	#17
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: Blasphemy to the Chevy world I like those old body styles too. I know a guy around here who has a F100 unibody as the next project. __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

04-26-2009, 02:00 PM	#18
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Blasphemy to the Chevy world Ranger frame? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck



Register or Log In To remove these advertisements.

07-19-2009, 06:48 PM	#19
JJ Lurking Member Join Date: Feb 2000 Location: Forest Grove, OR USA Posts: 196	Re: Blasphemy to the Chevy world Did you ever find out if you could put an S-10 frame under your truck? __________________ JJ 72 GMC 1500 350 4 Speed, stone stock baby!!!!! 72 GMC K-2500 350TPI 700R4 For those who fought for it, Freedom has a flavor the protected will never know.

07-19-2009, 09:18 PM	#20
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: Blasphemy to the Chevy world at least you are working of when fords cared about quality... i would rock the crap out of that ford.. i wouldnt care... because back then they were built worth a crap..! __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

Register or Log In To remove these advertisements.