The GSFMech Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GSFMECH** · 12-26-2007, 01:50 PM

Well I've finally gotten a few pictures and am going to start posting them here as I have time. The first few are what I started with. I bought this truck in 01. It was all original but was pretty ratty. It had 2 paint jobs in its life, both real cheap. They didn't even take the trim off when they painted it. The cab corners, lower fenders, rockers all stuffed with Bondo. It did have a perfect bed though and a nice set of ralley wheels. It had the original 350 but the tranny took a dump shortly after I got it so I rebuilt it. I found rats nests in both cab corners, the windows would not roll up and down, the doors would hardly open or shut and it had a broken upper left door hinge on it. Oh yeah the right front fender was dented along with the grill and front bumper. I had a good bumper and bought a repop grill and stuck them on but left the fender as it was (it had a crease in it). The AC and heater didn't work, the fan would not even blow but it was all there. I fixed all the problems, cleaned it up got the AC working which took a new heater core, compressor and evaporator, expansion valve etc. and I converted to 134A and used one of those Old Air Products POA eliminator kits. I changed all the belts and hoses, rebuilt the carb, changed the valve cover gaskets and tuned it up. Stuck a new 4 core radiator in it and rebuilt all the brakes. It still had the original Packard plug wires on it which crumbled when I changed the plugs. That would explain the miss the previous owner had the whole time he owned it. This made it a decent little truck to drive. I drove it for awhile like that and then bought a 4/6 drop kit from ECE and a set of American torque thrust 2's and slammed it. I changed the drive shaft over to a one piece as well. It had the original single exhaust so I put a set of duals on it with turbo mufflers because after I slammed it, it would drag.

**GSFMECH** · 12-26-2007, 01:53 PM

The right side, can you see the crease in the fender above the tire? It also had the big mirrors on it here.

**GSFMECH** · 12-26-2007, 01:55 PM

I drove it like this for awhile but had to fix the interior. I went to the Pate swap meet one year and loaded up with parts from Kenny's trucks, he claimed to be the "Wal-Mart of Chevy truck parts" that weekend and I got a lot of good deals. I got a Cheyenne seat cover, carpet, dash pad, new instrument bezel and all the goodies to go with a tach dash I had scrounged. I got an even better tach later from HuggerCST. A repop steering wheel, new AC balls and vents and new shift indicator and one of those custom auto sound style stereos. I later rounded up a set of blue seat belts and sun visors and found a good set of door panels to dye blue with the good stuff from Classic. I repainted the original tilt column and topped it off with the new wheel and shift indicator etc. My sister gave me a CD changer and I stuck it under the seat on the passenger side and a set of Pioneer Roman speakers Kevin (65streetcruiser) gave me, you know the kind, they roam all over the truck LOL. It came out nice.

**GSFMECH** · 12-26-2007, 01:58 PM

A little more cleaning and polishing and got rid of the big mirrors, those are genuine GM on there

**GSFMECH** · 12-26-2007, 02:00 PM

Kevin (65Streetcruiser)and I at a car show in Alexandria LA a couple of years ago

**GSFMECH** · 12-26-2007, 02:01 PM

Almost forgot the headliner. I got this off eBay (I think) and re-dyed it. I got the trim from Wynne

**lolife99** · 12-26-2007, 03:43 PM

Amazing work! I'll be looking forward to more posts. Thanks for the cool write-up!

NEVERENOUGH · 12-26-2007, 04:56 PM

I love the colors that thing had they really seem to pop. Very nice project can't wait to see more updates

**FRENCHBLUE72** · 12-27-2007, 06:19 AM

Very nice thanks for takeing the time to do the write up and posting of pictures.

killer71 · 12-27-2007, 07:34 AM

what color you goin back with?
You mean one can still get rockers for these trucks at the dealership?

**GSFMECH** · 12-27-2007, 07:55 AM

Thanks for the kind words everyone. Killer I'm going back with the original medium blue but I don't think I'm going to put the white back on it. There are so many around like it now. Yeah you can still get the factory rockers but I hear they are going fast, and they are expensive, but hey. I also bought new hood hinges from my local dealer. It took him a couple of days to get them. He won't be able to look them up for you as his computer won't go back that far but if you have the part number and he can order them for you. Go to GMpartsdirect.com and you can get an idea of what GM still has available and an idea of the price. They also list the part numbers on there. Chevyland in Shreveport has good parts people and they can get them even faster than my local dealer can if you have the numbers, I almost bought from them but didn't want to make the drive.

mkundo · 06-07-2008, 03:00 PM

I really like your aproch in refurbishing your truck.I know it will be enjoyed.
Have fun.

krue · 12-27-2007, 06:05 PM

Looks good, you gonna drive it to CTC next year?

**GSFMECH** · 12-28-2007, 12:41 AM

Hey Krue,

Boy I hope it's done by then. I may not make cruisin this year if my work schedule stays the same but the year after I'm bringing it for sure. If it's finished and I'm off work you can put money on it being there. I sure had fun at the last one.

Mike

krue · 12-28-2007, 07:32 AM

Can't wait to see it.

gringoloco · 12-28-2007, 12:57 PM

Nice work! Good to know about the GM parts and also good to see Wynne supplying another addict

**GSFMECH** · 12-29-2007, 06:12 AM

Hey Gringo, yeah Wynne has baled me out of a few tight spots hunting for parts. He has come to my rescue over and over.

HuggerCST · 12-29-2007, 03:22 PM

Thanks for the props guys, but I didn't do anything that Mike wouldn't do, or hasn't done for me. I'm just glad that I could help out with a worthy project. Great build thread Mike, I can't wait to see some paint fly on that thing!

**GSFMECH** · 04-13-2008, 02:12 AM

Time for a little update, I hope these pictures post OK I'm having a little camera problem. Anyway it's hard to tell in the first photo but the door gap at the top sucked. I had replaced the gutters and was beginning to think it was the gutter but I saw Bill (Palf70Step) do this mod on his truck so I thought I would try it. The next photo shows the spot welds drilled out.

**GSFMECH** · 04-13-2008, 02:15 AM

The next photo shows the spot welds after I pulled the door frame up to make the frame fit the gap properly and you can see how much it was pulled up before I rewelded it and the minor body work.

franky69c10 · 04-13-2008, 04:11 AM

looks good

killer71 · 04-13-2008, 04:45 AM

Nice work....thanx for the update

**LEEVON** · 04-13-2008, 05:51 AM

Nice progress GSFMECH! We have similar taste...

HuggerCST · 04-13-2008, 05:58 PM

Nice work Mike!

powell72 · 04-13-2008, 06:06 PM

Good to see progress, bed floor looks great.

12-26-2007, 01:50 PM	#1
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	The GSFMech Build Well I've finally gotten a few pictures and am going to start posting them here as I have time. The first few are what I started with. I bought this truck in 01. It was all original but was pretty ratty. It had 2 paint jobs in its life, both real cheap. They didn't even take the trim off when they painted it. The cab corners, lower fenders, rockers all stuffed with Bondo. It did have a perfect bed though and a nice set of ralley wheels. It had the original 350 but the tranny took a dump shortly after I got it so I rebuilt it. I found rats nests in both cab corners, the windows would not roll up and down, the doors would hardly open or shut and it had a broken upper left door hinge on it. Oh yeah the right front fender was dented along with the grill and front bumper. I had a good bumper and bought a repop grill and stuck them on but left the fender as it was (it had a crease in it). The AC and heater didn't work, the fan would not even blow but it was all there. I fixed all the problems, cleaned it up got the AC working which took a new heater core, compressor and evaporator, expansion valve etc. and I converted to 134A and used one of those Old Air Products POA eliminator kits. I changed all the belts and hoses, rebuilt the carb, changed the valve cover gaskets and tuned it up. Stuck a new 4 core radiator in it and rebuilt all the brakes. It still had the original Packard plug wires on it which crumbled when I changed the plugs. That would explain the miss the previous owner had the whole time he owned it. This made it a decent little truck to drive. I drove it for awhile like that and then bought a 4/6 drop kit from ECE and a set of American torque thrust 2's and slammed it. I changed the drive shaft over to a one piece as well. It had the original single exhaust so I put a set of duals on it with turbo mufflers because after I slammed it, it would drag. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 04-13-2013 at 01:01 AM.

12-26-2007, 01:53 PM	#2
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build The right side, can you see the crease in the fender above the tire? It also had the big mirrors on it here. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

12-26-2007, 01:55 PM	#3
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build I drove it like this for awhile but had to fix the interior. I went to the Pate swap meet one year and loaded up with parts from Kenny's trucks, he claimed to be the "Wal-Mart of Chevy truck parts" that weekend and I got a lot of good deals. I got a Cheyenne seat cover, carpet, dash pad, new instrument bezel and all the goodies to go with a tach dash I had scrounged. I got an even better tach later from HuggerCST. A repop steering wheel, new AC balls and vents and new shift indicator and one of those custom auto sound style stereos. I later rounded up a set of blue seat belts and sun visors and found a good set of door panels to dye blue with the good stuff from Classic. I repainted the original tilt column and topped it off with the new wheel and shift indicator etc. My sister gave me a CD changer and I stuck it under the seat on the passenger side and a set of Pioneer Roman speakers Kevin (65streetcruiser) gave me, you know the kind, they roam all over the truck LOL. It came out nice. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

12-26-2007, 01:58 PM	#4
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build A little more cleaning and polishing and got rid of the big mirrors, those are genuine GM on there Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

12-26-2007, 02:00 PM	#5
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Kevin (65Streetcruiser)and I at a car show in Alexandria LA a couple of years ago Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

12-26-2007, 02:01 PM	#6
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Almost forgot the headliner. I got this off eBay (I think) and re-dyed it. I got the trim from Wynne Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

12-26-2007, 03:43 PM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: The GSFMech Build Amazing work! I'll be looking forward to more posts. Thanks for the cool write-up! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-26-2007, 04:56 PM	#8
NEVERENOUGH Registered User Join Date: Jul 2004 Location: Chino Valley Az Posts: 209	Re: The GSFMech Build I love the colors that thing had they really seem to pop. Very nice project can't wait to see more updates

12-27-2007, 06:19 AM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: The GSFMech Build Very nice thanks for takeing the time to do the write up and posting of pictures. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-27-2007, 07:34 AM	#10
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: The GSFMech Build what color you goin back with? You mean one can still get rockers for these trucks at the dealership? __________________ R.I.P. Killer 71 10/26/07

12-27-2007, 07:55 AM	#11
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Thanks for the kind words everyone. Killer I'm going back with the original medium blue but I don't think I'm going to put the white back on it. There are so many around like it now. Yeah you can still get the factory rockers but I hear they are going fast, and they are expensive, but hey. I also bought new hood hinges from my local dealer. It took him a couple of days to get them. He won't be able to look them up for you as his computer won't go back that far but if you have the part number and he can order them for you. Go to GMpartsdirect.com and you can get an idea of what GM still has available and an idea of the price. They also list the part numbers on there. Chevyland in Shreveport has good parts people and they can get them even faster than my local dealer can if you have the numbers, I almost bought from them but didn't want to make the drive. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 12-27-2007 at 02:27 PM.

06-07-2008, 03:00 PM	#12
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: The GSFMech Build I really like your aproch in refurbishing your truck.I know it will be enjoyed. Have fun. __________________ Dan

12-27-2007, 06:05 PM	#13
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: The GSFMech Build Looks good, you gonna drive it to CTC next year? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-28-2007, 12:41 AM	#14
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Hey Krue, Boy I hope it's done by then. I may not make cruisin this year if my work schedule stays the same but the year after I'm bringing it for sure. If it's finished and I'm off work you can put money on it being there. I sure had fun at the last one. Mike __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

12-28-2007, 07:32 AM	#15
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: The GSFMech Build Can't wait to see it. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

12-28-2007, 12:57 PM	#16
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: The GSFMech Build Nice work! Good to know about the GM parts and also good to see Wynne supplying another addict __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-29-2007, 06:12 AM	#17
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Hey Gringo, yeah Wynne has baled me out of a few tight spots hunting for parts. He has come to my rescue over and over. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

12-29-2007, 03:22 PM	#18
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: The GSFMech Build Thanks for the props guys, but I didn't do anything that Mike wouldn't do, or hasn't done for me. I'm just glad that I could help out with a worthy project. Great build thread Mike, I can't wait to see some paint fly on that thing! __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-13-2008, 02:12 AM	#19
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Time for a little update, I hope these pictures post OK I'm having a little camera problem. Anyway it's hard to tell in the first photo but the door gap at the top sucked. I had replaced the gutters and was beginning to think it was the gutter but I saw Bill (Palf70Step) do this mod on his truck so I thought I would try it. The next photo shows the spot welds drilled out. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2008, 02:15 AM	#20
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build The next photo shows the spot welds after I pulled the door frame up to make the frame fit the gap properly and you can see how much it was pulled up before I rewelded it and the minor body work. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 04-13-2008 at 02:38 AM. Reason: spelling

04-13-2008, 04:11 AM	#21
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: The GSFMech Build looks good __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

04-13-2008, 04:45 AM	#22
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: The GSFMech Build Nice work....thanx for the update __________________ R.I.P. Killer 71 10/26/07

04-13-2008, 05:51 AM	#23
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: The GSFMech Build Nice progress GSFMECH! We have similar taste... __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

04-13-2008, 05:58 PM	#24
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: The GSFMech Build Nice work Mike! __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-13-2008, 06:06 PM	#25
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: The GSFMech Build Good to see progress, bed floor looks great. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

Register or Log In To remove these advertisements.