Loadmaster '47 COE - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lower50's · 05-09-2016, 02:37 AM

Oh nice do you have a plan for this one?

99 to Life · 05-09-2016, 07:51 AM

I can't even imagine what this thing is gonna look like. Lucky man you are. heck I'd build it and sell it cause that would bring some serious loot. I hope you don't go asking for that delete plate back!!!

47 Fasttoys · 05-16-2016, 10:14 AM

Went to a car show yesterday and look what I took home. My buddy also took a top 15 trophy for his '50 Olds we just completed the LS swap on. My fleet plus his Olds, all are fuel injected.
Rob

99 to Life · 05-16-2016, 12:17 PM

killer, You'll be dragging quite a few of those home Im sure.

lower50's · 05-16-2016, 03:02 PM

Sweet!! You deserve it, You did a great job.

**Palf70Step** · 05-16-2016, 05:59 PM

Great looking fleet, and congratulations to you both.

**Advanced Design** · 05-16-2016, 08:50 PM

Good looking line up and congrat's on the top pick.

Bad Apache · 05-16-2016, 10:00 PM

Car show at Rob's house!

47 Fasttoys · 06-05-2016, 05:43 PM

Hi all, so if any of you have followed my build thread you know I put a few miles on my COE (over 36K now). Well, it's that time again, I will leave Wednesday of next week and make a blast to Oklahoma for my daughter's wedding. A blast, as in 12 hours. From there it's up the road to southern Colorado (which is where the truck came from) and then to the Denver area. So that takes me to around Tuesday of the following week. From that point on I'm open to suggestions. What I'm looking for is cruise-ins or car or truck get together. If you want to take a good look at the COE and don't mind seeing a few bugs still attached to the front, just post whats going on in your area and if it's close to on my way I'll do my best to stop on by.
Rob

48ChevBagged · 06-05-2016, 05:52 PM

Quote:

Originally Posted by 47 Fasttoys

Hi all, so if any of you have followed my build thread you know I put a few miles on my COE (over 36K now). Well, it's that time again, I will leave Wednesday of next week and make a blast to Oklahoma for my daughter's wedding. A blast, as in 12 hours. From there it's up the road to southern Colorado (which is where the truck came from) and then to the Denver area. So that takes me to around Tuesday of the following week. From that point on I'm open to suggestions. What I'm looking for is cruise-ins or car or truck get together. If you want to take a good look at the COE and don't mind seeing a few bugs still attached to the front, just post whats going on in your area and if it's close to on my way I'll do my best to stop on by.
Rob

It would be a good time to catch up with the hot rod power tour and run a couple of legs. It will be going up into OK and ending in Kansas I believe.

Bad Apache · 06-05-2016, 09:37 PM

Go north next time Rob!

47 Fasttoys · 06-09-2016, 09:46 AM

And we're off, got rolling at 6:00. disregard the times on the camera, I need to set it correctly. For the run out I took the interstate because it's faster? You can tell this by the first picture in Atlanta! Interestingly enough I started with just a tic over 37K on the truck. Normal run conditions for the day. Had to make a quick stop in Alabama. Overall an uneventful day, gas mileage is a little lower then expected at 16.5 MPG. Long day on the road, 16 hours, 828 miles. No A/C!
Rob

solidaxel · 06-09-2016, 10:01 AM

How is the seat Cushion !!

99 to Life · 06-09-2016, 10:02 AM

Powertour tahhhhh Powerlife

flashed · 06-09-2016, 10:19 AM

Im glad your trip is uneventful so far ,it would have been fun to see your truck on the Talladega track .We have been on it a few times in our 72 Malibu convertible ,have a safe trip .

47 Fasttoys · 06-09-2016, 03:31 PM

Hey Solid, the cushion for the bottom is fine, no but burn, no issues. That being said the seat back can be a little rough. For normal driving no big deal but on a long day like yesterday it gets you in the lower back. Yesterday I was using a Yoga mat from Walmart across the back cushion. My wife had this idea and it worked great. 16 hours on the road, no discomfort yesterday no issues at all this morning. My seat is from a 1990 Silverado 60/40.
Rob

**Dieselwrencher** · 06-09-2016, 08:42 PM

Safe travels! Ryanroo is in the Durango area and might know of some truck happenings in the area.

solidaxel · 06-10-2016, 10:09 AM

When is the big show in Pueblo Co?

47 Fasttoys · 06-11-2016, 07:33 PM

Proud parents of the Bride, the wedding party. Our beautiful girl.
Rob

nvrdone · 06-11-2016, 07:38 PM

indicates 78 mph @2000 rpm - sweet - and 16.5 mpg with that flat nose - I'd say that's great

**Advanced Design** · 06-11-2016, 08:48 PM

Very nice wedding pictures. Congratulations!

Enjoy the trip!

flashed · 06-11-2016, 09:13 PM

Very nice wedding pics ,you clean up pretty good .My wife loved the pic of the wedding party on the truck.

**Palf70Step** · 06-11-2016, 09:25 PM

Nice for sure!!

Purcell69 · 06-12-2016, 09:38 AM

Very nice indeed!

-Joe

mud.man.rj · 06-12-2016, 01:13 PM

Dare to be different, COE wedding cruiser, very cool idea, nice pic's too.

05-09-2016, 02:37 AM	#651
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: Loadmaster '47 COE Oh nice do you have a plan for this one? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

05-09-2016, 07:51 AM	#652
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Loadmaster '47 COE I can't even imagine what this thing is gonna look like. Lucky man you are. heck I'd build it and sell it cause that would bring some serious loot. I hope you don't go asking for that delete plate back!!! __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

05-16-2016, 10:14 AM	#653
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: Loadmaster '47 COE Went to a car show yesterday and look what I took home. My buddy also took a top 15 trophy for his '50 Olds we just completed the LS swap on. My fleet plus his Olds, all are fuel injected. Rob __________________ My '47 C.O.E build

05-16-2016, 12:17 PM	#654
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Loadmaster '47 COE killer, You'll be dragging quite a few of those home Im sure. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

05-16-2016, 03:02 PM	#655
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: Loadmaster '47 COE Sweet!! You deserve it, You did a great job. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

05-16-2016, 05:59 PM	#656
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,698	Re: Loadmaster '47 COE Great looking fleet, and congratulations to you both. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-16-2016, 08:50 PM	#657
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: Loadmaster '47 COE Good looking line up and congrat's on the top pick. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

05-16-2016, 10:00 PM	#658
Bad Apache Registered User Join Date: Feb 2015 Location: Mechanicsburg, PA Posts: 93	Re: Loadmaster '47 COE Car show at Rob's house! __________________ 1958 Apache 454ci 4 speed

06-05-2016, 05:43 PM	#659
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: Loadmaster '47 COE Hi all, so if any of you have followed my build thread you know I put a few miles on my COE (over 36K now). Well, it's that time again, I will leave Wednesday of next week and make a blast to Oklahoma for my daughter's wedding. A blast, as in 12 hours. From there it's up the road to southern Colorado (which is where the truck came from) and then to the Denver area. So that takes me to around Tuesday of the following week. From that point on I'm open to suggestions. What I'm looking for is cruise-ins or car or truck get together. If you want to take a good look at the COE and don't mind seeing a few bugs still attached to the front, just post whats going on in your area and if it's close to on my way I'll do my best to stop on by. Rob __________________ My '47 C.O.E build

06-05-2016, 09:37 PM	#661
Bad Apache Registered User Join Date: Feb 2015 Location: Mechanicsburg, PA Posts: 93	Re: Loadmaster '47 COE Go north next time Rob! __________________ 1958 Apache 454ci 4 speed

06-09-2016, 09:46 AM	#662
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: Loadmaster '47 COE And we're off, got rolling at 6:00. disregard the times on the camera, I need to set it correctly. For the run out I took the interstate because it's faster? You can tell this by the first picture in Atlanta! Interestingly enough I started with just a tic over 37K on the truck. Normal run conditions for the day. Had to make a quick stop in Alabama. Overall an uneventful day, gas mileage is a little lower then expected at 16.5 MPG. Long day on the road, 16 hours, 828 miles. No A/C! Rob __________________ My '47 C.O.E build

06-09-2016, 10:01 AM	#663
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Loadmaster '47 COE How is the seat Cushion !! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

06-09-2016, 10:02 AM	#664
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Loadmaster '47 COE Powertour tahhhhh Powerlife __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

06-09-2016, 10:19 AM	#665
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Loadmaster '47 COE Im glad your trip is uneventful so far ,it would have been fun to see your truck on the Talladega track .We have been on it a few times in our 72 Malibu convertible ,have a safe trip .

06-09-2016, 03:31 PM	#666
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: Loadmaster '47 COE Hey Solid, the cushion for the bottom is fine, no but burn, no issues. That being said the seat back can be a little rough. For normal driving no big deal but on a long day like yesterday it gets you in the lower back. Yesterday I was using a Yoga mat from Walmart across the back cushion. My wife had this idea and it worked great. 16 hours on the road, no discomfort yesterday no issues at all this morning. My seat is from a 1990 Silverado 60/40. Rob __________________ My '47 C.O.E build



Register or Log In To remove these advertisements.

06-09-2016, 08:42 PM	#667
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: Loadmaster '47 COE Safe travels! Ryanroo is in the Durango area and might know of some truck happenings in the area. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

06-10-2016, 10:09 AM	#668
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Loadmaster '47 COE When is the big show in Pueblo Co? __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

06-11-2016, 07:33 PM	#669
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: Loadmaster '47 COE Proud parents of the Bride, the wedding party. Our beautiful girl. Rob __________________ My '47 C.O.E build

06-11-2016, 07:38 PM	#670
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,427	Re: Loadmaster '47 COE indicates 78 mph @2000 rpm - sweet - and 16.5 mpg with that flat nose - I'd say that's great

06-11-2016, 08:48 PM	#671
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: Loadmaster '47 COE Very nice wedding pictures. Congratulations! Enjoy the trip! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

06-11-2016, 09:13 PM	#672
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Loadmaster '47 COE Very nice wedding pics ,you clean up pretty good .My wife loved the pic of the wedding party on the truck.

06-11-2016, 09:25 PM	#673
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,698	Re: Loadmaster '47 COE Nice for sure!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-12-2016, 09:38 AM	#674
Purcell69 Registered User Join Date: Jul 2013 Location: Central OK Posts: 521	Re: Loadmaster '47 COE Very nice indeed! -Joe __________________ My '57 "Ram-rolet" not a NAPCO build: http://67-72chevytrucks.com/vboard/s...d.php?t=589917

06-12-2016, 01:13 PM	#675
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Loadmaster '47 COE Dare to be different, COE wedding cruiser, very cool idea, nice pic's too. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

Register or Log In To remove these advertisements.