1961 Crew Max - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 02-01-2016, 07:02 AM

Very nice.

**Advanced Design** · 02-01-2016, 08:49 AM

Nice work Chizzler.

Luther Grimace · 02-01-2016, 06:33 PM

Quote:

Originally Posted by CHIZZLER

That is great. I would love to see some pics of how it all went together and what was needed to fie it off.

I sent off my massive van harness in a big contractor trash bag and it came back in this small box.

He did a great job cleaning it up to minimal wiring.

All the engine required to crank were 3 connections. This was just a quick test before I took the engine out of the donor frame. I had a single ground, 12V constant power, and 12V switch power to the fuse block.

There are other inputs that are required like TCC, WTS & CEL lamps, etc but it being a quick test didn't require it. I didn't wire up the solenoid wire. I just jumped it out to the power terminal on the starter.

I would definitely recommend Ken at Standalone Solutions. He worked with me since my harness was from a van and I wanted to retain the 4L85E. He was fair priced and quick. I'm not one to endorse someone often but this harness work cost a chunk of change and I am pleased with his work.

**CHIZZLER** · 02-01-2016, 08:34 PM

Thanks luther for posting the pics. Ken does nice work. Looking forward to working with him but still early for me to send my harness in.

2mas · 02-01-2016, 08:44 PM

I used Ken for my harness re-build. Perfect!
Test fit here.
/Thomas

**CHIZZLER** · 02-02-2016, 02:05 AM

Thanks for posting another pic of ken's work 2mas.

**CHIZZLER** · 02-08-2016, 12:08 AM

Little update. Floor and tunnel are closed up. Next get back seat mocked up from duramax donor. Got a 14 bolt 6 lug rear axle with 3:42 open for $75. Going to look into narrowing it and packing it with a posi and 3:73 with disc brakes. CHIZZLER

**Advanced Design** · 02-08-2016, 10:00 PM

Wow, very nice work on the floor!

Eagletucky · 02-08-2016, 11:17 PM

Nice!!!!

**CHIZZLER** · 02-09-2016, 12:02 AM

Quote:

Originally Posted by Advanced Design

Wow, very nice work on the floor!

Thanks doug.

Quote:

Originally Posted by Eagletucky

Nice!!!!

Thank you. Diggin your Burban build.

65sub · 02-09-2016, 11:17 AM

Your floor looks real good Chizzler

**Dieselwrencher** · 02-10-2016, 09:42 PM

Great work on the floors!

**CHIZZLER** · 02-15-2016, 09:48 PM

Little more progress. Got hydro boost mocked up in factory location. Also installed PB hood hinges. 14 bolt is being narrowed. Thanks CHIZZLER

flashed · 02-15-2016, 09:54 PM

Looks great ,looking forward to more .

2mas · 02-16-2016, 06:24 PM

Great progress! Thanks for sharing the hydra boost assembly picture. I'll be working on my truck this weekend. Is that the master cylinder from the Duramax truck donor? I'm think I might go with the CPP with built in restrictors.
/Thomas

**CHIZZLER** · 02-17-2016, 12:17 AM

Master is from the astro van. Going to go with a smaller design. Either CPP or similar.

lower50's · 02-18-2016, 03:46 AM

CHIZZLER Great project and amazing job on getting that beast to fit. Glad your wife beat that s#!t down. Love the frame you built. Keep it up I'm in now.

65sub · 02-18-2016, 01:35 PM

Nice work Chizzler

**CHIZZLER** · 02-18-2016, 09:00 PM

Quote:

Originally Posted by lower50's

CHIZZLER Great project and amazing job on getting that beast to fit. Glad your wife beat that s#!t down. Love the frame you built. Keep it up I'm in now.

Thanks for checking in. Wife is doing good.

Quote:

Originally Posted by 65sub

Nice work Chizzler

Thank you.

LT1 Burb · 02-21-2016, 11:30 AM

Wow , that is freaking awesome, nice job.

**CHIZZLER** · 02-21-2016, 11:42 AM

Radiator shower up from PRC (performance rod and custom). I had them upsize the lower water neck to 2" and weld in -10AN fittings for trans. Spal s-blade fan. Also got new 14 bolt weld on trailing arm mounts from captain fab. Thanks CHIZZLER

**66ChevyMax** · 02-21-2016, 12:12 PM

That looks sweet!

**CHIZZLER** · 02-29-2016, 12:31 AM

Little update. Got the new intercooler and radiator fit. Overall went together well. Had to modify core support bracing around original radiator opening for the intercooler to sit back in it to fit behind grill. Had to cut very bottom lower bar of grill to clear. Nothing visible. Very hard to tell There is any thing behind the grill with a black intercooler. Also got the boost tube piping kit and the piping to rework the water inlet/outlet connections on the motor. Thanks CHIZZLER.

Preacherman5555 · 03-08-2016, 05:25 PM

Nice work!!!!!! these crew cabs are a lot of work, but i sure like'm

**CHIZZLER** · 03-20-2016, 10:38 PM

Today we got some work done. Made both side's of the boost tubes. Got the new wilwood master cylinder and proportioning valve in place. Also got the steering column hooked to the rack and pinion. Had to cut the column down about 5" and installed a new bearing at the end. Also got the lower water hose built. We then started playing around with idea's for the front inner fenders and came up with a mock up for know. Thanks CHIZZLER.

02-01-2016, 07:02 AM	#251
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,644	Re: 1961 Crew Max Very nice. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-01-2016, 08:49 AM	#252
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: 1961 Crew Max Nice work Chizzler. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

02-01-2016, 08:34 PM	#254
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 1961 Crew Max Thanks luther for posting the pics. Ken does nice work. Looking forward to working with him but still early for me to send my harness in. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

02-01-2016, 08:44 PM	#255
2mas Registered User Join Date: Jun 2011 Location: Sweden Posts: 126	Re: 1961 Crew Max I used Ken for my harness re-build. Perfect! Test fit here. /Thomas Attached Images __________________ 1965 c10 BBW LWB - Duramax 2010 Camaro SS - Whipple (721hp) 2017 Volvo V60 diesel-hybrid (233hp) 2008 volvo XC70 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=677577

02-02-2016, 02:05 AM	#256
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 1961 Crew Max Thanks for posting another pic of ken's work 2mas. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

02-08-2016, 12:08 AM	#257
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 1961 Crew Max Little update. Floor and tunnel are closed up. Next get back seat mocked up from duramax donor. Got a 14 bolt 6 lug rear axle with 3:42 open for $75. Going to look into narrowing it and packing it with a posi and 3:73 with disc brakes. CHIZZLER Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

02-08-2016, 10:00 PM	#258
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: 1961 Crew Max Wow, very nice work on the floor! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

02-08-2016, 11:17 PM	#259
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: 1961 Crew Max Nice!!!! __________________ The Swiss Car Club......A drinking club with a car problem....

02-09-2016, 11:17 AM	#261
65sub Registered User Join Date: Jun 2014 Location: dresden , ontario Posts: 628	Re: 1961 Crew Max Your floor looks real good Chizzler __________________ Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167

02-10-2016, 09:42 PM	#262
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,137	Re: 1961 Crew Max Great work on the floors! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-15-2016, 09:48 PM	#263
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 1961 Crew Max Little more progress. Got hydro boost mocked up in factory location. Also installed PB hood hinges. 14 bolt is being narrowed. Thanks CHIZZLER Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

02-15-2016, 09:54 PM	#264
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: 1961 Crew Max Looks great ,looking forward to more .

02-16-2016, 06:24 PM	#265
2mas Registered User Join Date: Jun 2011 Location: Sweden Posts: 126	Re: 1961 Crew Max Great progress! Thanks for sharing the hydra boost assembly picture. I'll be working on my truck this weekend. Is that the master cylinder from the Duramax truck donor? I'm think I might go with the CPP with built in restrictors. /Thomas __________________ 1965 c10 BBW LWB - Duramax 2010 Camaro SS - Whipple (721hp) 2017 Volvo V60 diesel-hybrid (233hp) 2008 volvo XC70 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=677577

02-17-2016, 12:17 AM	#266
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 1961 Crew Max Master is from the astro van. Going to go with a smaller design. Either CPP or similar. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

02-18-2016, 03:46 AM	#267
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: 1961 Crew Max CHIZZLER Great project and amazing job on getting that beast to fit. Glad your wife beat that s#!t down. Love the frame you built. Keep it up I'm in now. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually



Register or Log In To remove these advertisements.

02-18-2016, 01:35 PM	#268
65sub Registered User Join Date: Jun 2014 Location: dresden , ontario Posts: 628	Re: 1961 Crew Max Nice work Chizzler __________________ Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167

02-21-2016, 11:30 AM	#270
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: 1961 Crew Max Wow , that is freaking awesome, nice job.

02-21-2016, 11:42 AM	#271
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 1961 Crew Max Radiator shower up from PRC (performance rod and custom). I had them upsize the lower water neck to 2" and weld in -10AN fittings for trans. Spal s-blade fan. Also got new 14 bolt weld on trailing arm mounts from captain fab. Thanks CHIZZLER Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

02-21-2016, 12:12 PM	#272
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: 1961 Crew Max That looks sweet! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

02-29-2016, 12:31 AM	#273
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 1961 Crew Max Little update. Got the new intercooler and radiator fit. Overall went together well. Had to modify core support bracing around original radiator opening for the intercooler to sit back in it to fit behind grill. Had to cut very bottom lower bar of grill to clear. Nothing visible. Very hard to tell There is any thing behind the grill with a black intercooler. Also got the boost tube piping kit and the piping to rework the water inlet/outlet connections on the motor. Thanks CHIZZLER. Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

03-08-2016, 05:25 PM	#274
Preacherman5555 Registered User Join Date: Jan 2010 Location: Godendale WA. Posts: 105	Re: 1961 Crew Max Nice work!!!!!! these crew cabs are a lot of work, but i sure like'm

03-20-2016, 10:38 PM	#275
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: 1961 Crew Max Today we got some work done. Made both side's of the boost tubes. Got the new wilwood master cylinder and proportioning valve in place. Also got the steering column hooked to the rack and pinion. Had to cut the column down about 5" and installed a new bearing at the end. Also got the lower water hose built. We then started playing around with idea's for the front inner fenders and came up with a mock up for know. Thanks CHIZZLER. Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

Register or Log In To remove these advertisements.