73-87 Trailing Arm kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PBFAB.COM · 10-24-2012, 12:49 PM

Thought I would post some more pics up of our trailing arm conversion for the square bodies. We have been getting more and more interest in the kit lately.

It's available with air bags or coil-overs. Kit starts at $1650.

PBFAB.COM · 10-24-2012, 12:50 PM

More pics...

PBFAB.COM · 10-24-2012, 12:51 PM

and more...

PBFAB.COM · 10-24-2012, 12:52 PM

Last two...

jimmydean · 10-24-2012, 01:53 PM

Quality engineered.

54Caddy · 10-24-2012, 09:27 PM

How much just for the c notch? contacted you about that but never got a response back.

PBFAB.COM · 10-24-2012, 09:49 PM

Quote:

Originally Posted by 54Caddy

How much just for the c notch? contacted you about that but never got a response back.

$265
Posted via Mobile Device

54Caddy · 10-25-2012, 12:23 AM

cool thanks man. as always i understand you are a busy crew of guys. Oh and hats off to you and your crew for that frame you built!

Project1970 · 10-25-2012, 01:42 AM

Would this also work for those of us whose '67-'72s were not blessed with trailing arms and coils from the factory?

PBFAB.COM · 10-25-2012, 01:54 AM

Quote:

Originally Posted by Project1970

Would this also work for those of us whose '67-'72s were not blessed with trailing arms and coils from the factory?

This one is specific to the 73-87..... However our 63-72 stage 2 rear deluxe kit will do the job.

We have all the bracketry and components to make it a simple conversion.

Nate
Posted via Mobile Device

sbc383rulz · 10-25-2012, 02:09 AM

how compatible is this with suburbans?

PBFAB.COM · 10-25-2012, 09:13 AM

Quote:

Originally Posted by sbc383rulz

how compatible is this with suburbans?

We haven't tried it out on a sub. I do know that the trailing arm x-member would need to be reworked..... Just how much, not sure.
Posted via Mobile Device

82swb · 11-18-2012, 01:33 PM

Are you going to be making a step notch version of this?
Posted via Mobile Device

PBFAB.COM · 11-19-2012, 03:04 PM

Quote:

Originally Posted by 82swb

Are you going to be making a step notch version of this?
Posted via Mobile Device

We have plans to make this kit with a mild step notch.... but if you want to lay frame it's a four-link in your future. The trailing arms will contact the frame before it lets it go all the way down. From the measurements I have taken, it looks like we can get it right around 2" off the ground before the trailing arms run out of clearance.

Nate

bluex · 12-05-2012, 05:31 AM

What all is included in the $1650 price? Bags and shocks to? Also is there a panhard bar and its just not pictured?

I also saw on porterbuilt that you were going to offer a basic kit for using factory arms. I have a set and a 72 rear axle I plan to use. What would the price of the basic kit be and can it be used with a set of factory rear springs. What all would be included in it for the price.

Thanks!

KQQL IT · 12-09-2012, 03:15 AM

It require a 2 piece drive line?
Posted via Mobile Device

McNutty · 01-01-2013, 04:41 PM

Id love to do this but not for getting low but to get the extra rim and tire clearnce it gives by removing the leaf springs.

PBFAB.COM · 01-02-2013, 10:44 AM

Quote:

Originally Posted by bluex

What all is included in the $1650 price? Bags and shocks to? Also is there a panhard bar and its just not pictured?

I also saw on porterbuilt that you were going to offer a basic kit for using factory arms. I have a set and a 72 rear axle I plan to use. What would the price of the basic kit be and can it be used with a set of factory rear springs. What all would be included in it for the price.

Thanks!

Give us a call to discuss pricing. We have a couple changes with the New Year.

Quote:

Originally Posted by KQQL IT

It require a 2 piece drive line?
Posted via Mobile Device

It will work with a one piece drive shaft.

Quote:

Originally Posted by McNutty

Id love to do this but not for getting low but to get the extra rim and tire clearnce it gives by removing the leaf springs.

This kit isn't designed to be ultra low. It will maintain the factory bed floor. As you mentioned, it gives tons of additional tire clearance.

10-24-2012, 12:49 PM	#1
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	73-87 Trailing Arm kit Thought I would post some more pics up of our trailing arm conversion for the square bodies. We have been getting more and more interest in the kit lately. It's available with air bags or coil-overs. Kit starts at $1650. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

10-24-2012, 12:50 PM	#2
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: 73-87 Trailing Arm kit More pics... Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

10-24-2012, 12:51 PM	#3
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: 73-87 Trailing Arm kit and more... Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

10-24-2012, 12:52 PM	#4
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: 73-87 Trailing Arm kit Last two... Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

10-24-2012, 01:53 PM	#5
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: 73-87 Trailing Arm kit Quality engineered. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

10-24-2012, 09:27 PM	#6
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: 73-87 Trailing Arm kit How much just for the c notch? contacted you about that but never got a response back. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

10-25-2012, 12:23 AM	#8
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: 73-87 Trailing Arm kit cool thanks man. as always i understand you are a busy crew of guys. Oh and hats off to you and your crew for that frame you built! __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

10-25-2012, 01:42 AM	#9
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	Re: 73-87 Trailing Arm kit Would this also work for those of us whose '67-'72s were not blessed with trailing arms and coils from the factory? __________________ Project1970 - LS1 Swap Complete!

10-25-2012, 02:09 AM	#11
sbc383rulz Registered User Join Date: May 2006 Location: Poulsbo washington Posts: 107	Re: 73-87 Trailing Arm kit how compatible is this with suburbans? __________________ 1969 C2500 350/np435 1983 malibu wagon vortec 350/700r4 Gillis

11-18-2012, 01:33 PM	#13
82swb Registered User Join Date: May 2012 Location: Gilbert, Arizona Posts: 256	Re: 73-87 Trailing Arm kit Are you going to be making a step notch version of this? Posted via Mobile Device

12-05-2012, 05:31 AM	#15
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Re: 73-87 Trailing Arm kit What all is included in the $1650 price? Bags and shocks to? Also is there a panhard bar and its just not pictured? I also saw on porterbuilt that you were going to offer a basic kit for using factory arms. I have a set and a 72 rear axle I plan to use. What would the price of the basic kit be and can it be used with a set of factory rear springs. What all would be included in it for the price. Thanks! __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

12-09-2012, 03:15 AM	#16
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,131	Re: 73-87 Trailing Arm kit It require a 2 piece drive line? Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

01-01-2013, 04:41 PM	#17
McNutty Registered User Join Date: Mar 2011 Location: US Posts: 82	Re: 73-87 Trailing Arm kit Id love to do this but not for getting low but to get the extra rim and tire clearnce it gives by removing the leaf springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.