|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-14-2011, 12:53 PM
|
#1 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
02 silverado,inner tierod ends
I have an 02 1500, 2wd that needs inner tierod ends. The truck has 165,000 on the clock, so my ? is ....Would it be more economical(in the long run), to just replace the rack & pinion assy,vs just replacing the inner tierod ends? crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
11-14-2011, 04:28 PM
|
#2 |
|
Has more rust than truck...
Join Date: Apr 2005
Location: Ivanhoe, MN
Posts: 2,421
|
Re: 02 silverado,inner tierod ends
If you have no leaks, noises or other concerns with your current rack, I would replace the tie rod ends and bellows and call it a day.
|
|
|
|
|
11-14-2011, 10:40 PM
|
#3 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: 02 silverado,inner tierod ends
Will that require a drill fixture, to remove the pins(like on most front drive apps)? crazyl
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
11-15-2011, 09:48 AM
|
#4 |
|
Has more rust than truck...
Join Date: Apr 2005
Location: Ivanhoe, MN
Posts: 2,421
|
Re: 02 silverado,inner tierod ends
You can use a "inner tie rod removal tool" most auto stores have it as a loan-a-tool. Or a pipe wrench and vise grip have been used.
http://67-72chevytrucks.com/vboard/s...d.php?t=469722 |
|
|
|
|
11-15-2011, 02:39 PM
|
#5 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: 02 silverado,inner tierod ends
Many thanks
 crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
