The GSFMech Build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 12-27-2007, 06:05 PM

Looks good, you gonna drive it to CTC next year?

**GSFMECH** · 12-28-2007, 12:41 AM

Hey Krue,

Boy I hope it's done by then. I may not make cruisin this year if my work schedule stays the same but the year after I'm bringing it for sure. If it's finished and I'm off work you can put money on it being there. I sure had fun at the last one.

Mike

krue · 12-28-2007, 07:32 AM

Can't wait to see it.

gringoloco · 12-28-2007, 12:57 PM

Nice work! Good to know about the GM parts and also good to see Wynne supplying another addict

**GSFMECH** · 12-29-2007, 06:12 AM

Hey Gringo, yeah Wynne has baled me out of a few tight spots hunting for parts. He has come to my rescue over and over.

HuggerCST · 12-29-2007, 03:22 PM

Thanks for the props guys, but I didn't do anything that Mike wouldn't do, or hasn't done for me. I'm just glad that I could help out with a worthy project. Great build thread Mike, I can't wait to see some paint fly on that thing!

**GSFMECH** · 04-13-2008, 02:12 AM

Time for a little update, I hope these pictures post OK I'm having a little camera problem. Anyway it's hard to tell in the first photo but the door gap at the top sucked. I had replaced the gutters and was beginning to think it was the gutter but I saw Bill (Palf70Step) do this mod on his truck so I thought I would try it. The next photo shows the spot welds drilled out.

**GSFMECH** · 04-13-2008, 02:15 AM

The next photo shows the spot welds after I pulled the door frame up to make the frame fit the gap properly and you can see how much it was pulled up before I rewelded it and the minor body work.

**GSFMECH** · 04-13-2008, 02:22 AM

Another pic of the bodywork and you can see how much I pulled it up a little better also a shot of it spot primered and the finished door frame. I know it's hard to tell in the photo but it really closed the gap up at the top and at the rear and it's more uniform all the way around, it was driving me crazy.

**GSFMECH** · 04-13-2008, 02:31 AM

I have the bed floor blocked and ready for paint as well as the front bed panel. The inside of the bedsides will need one more blocking but they are close. I blocked that floor 7 times with Dupont urethane filler primer, I think it's going to be nice. I sure hope so after all the work.

**GSFMECH** · 04-13-2008, 02:34 AM

My buddy Kevin finished up the tailgate and it's ready to paint. I slipped the bed back together here because of storage space when I'm at work, I've been doing all the work with it broken apart on a rack built for the bed (crappy photo but you get the idea).

franky69c10 · 04-13-2008, 04:11 AM

looks good

killer71 · 04-13-2008, 04:45 AM

Nice work....thanx for the update

**LEEVON** · 04-13-2008, 05:51 AM

Nice progress GSFMECH! We have similar taste...

HuggerCST · 04-13-2008, 05:58 PM

Nice work Mike!

powell72 · 04-13-2008, 06:06 PM

Good to see progress, bed floor looks great.

**GSFMECH** · 04-13-2008, 09:16 PM

Thanks guys, LEEVON that is a good looking truck. I'll be glad when mine looks good again.

**Palf70Step** · 04-14-2008, 03:13 AM

Mike, its looking great. Like Krue mentioned earlier, can't wait to see it at cruising, of course I hope to see mine there someday too.

milled · 04-14-2008, 03:27 AM

Quote:

Originally Posted by GSFMECH

All this time I was buying parts to do the body. I can't thank Wynne (HuggerCST) enough for all the parts. I got 2 doors, 2 fenders, a hood and a tailgate from him. I went through a couple of tailgates till I got this last one and it's real nice. I didn't want any repop sheet metal so good used was my only option. I did buy 2 repop inner fenders though. I found a real good core support at the Pate swap meet one year. I searched and collected for just about every piece of trim at swap meets and eBay and bought a lot back from a guy I sold my restored 71 to. He stripped the trim off to shave and customize my old truck and I had all new GM trim on it. I bought a new GM grill. I'm still looking for a couple of better pieces but all my trim, grill, bumpers etc. are all GM. I bought repop patch panels, cab corners, rockers, kick panels, inner rockers and the lower A-pillars.This is just a few of the parts, most are stashed in the attic.

Looks like my parts pile

Burn that mig up son!!!!!!!!!

**GSFMECH** · 04-14-2008, 01:22 PM

Thanks everyone. It sure feels good to make progress.

Hey Bill,
I'm hoping to have it ready for cruising the coast but it looks like I will have to work this year if my schedule stays the same so I won't make it. That's too bad I had fun hanging out with you guys last year.The rest of our bunch should make it though. Look out next year I will definitely have it there. Maybe you'll have yours done by then too. I'm hoping Wynne, Chris, Eric, Keith and a few more of us Louisiana guys have our trucks finished by then.

LuckyHenriksen · 04-15-2008, 01:57 AM

Hey sweet truck, i really like the medium blue. Any one know more about it or where I can get some

chevy72blu · 05-22-2008, 10:02 PM

GSFMech, check you PM's.

Could we see a pic of your throttle linkage?

**GSFMECH** · 05-28-2008, 04:54 AM

chevy72blu.

The first photo is an original small block cable bracket. The second photo shows it side by side with my modified bracket, one from the top and one from the bottom. I bent the part over where the throttle spring fits and cut it to fit against the carb to keep it from moving. The last photo shows it mounted to the carb. It was a quicky, you can probably find something better from Summit or jegs. Hope this helps you.

Mike

chevy72blu · 05-28-2008, 05:40 PM

Ah hah... I never thought about going OUT with the cable, I was trying to figure out how to take it BACK. Thanks man, I appreciate it!

Would you mind taking a measurement from the center of the hole that mounts to the carb base to the center of the hole where the cable is held by the clip piece? I am just going to fab one up from scratch out of some flat bar.

**GSFMECH** · 05-30-2008, 05:04 PM

chevy72blu,

It's 2-3/4".

12-27-2007, 06:05 PM	#26
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: The GSFMech Build Looks good, you gonna drive it to CTC next year? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-28-2007, 12:41 AM	#27
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Hey Krue, Boy I hope it's done by then. I may not make cruisin this year if my work schedule stays the same but the year after I'm bringing it for sure. If it's finished and I'm off work you can put money on it being there. I sure had fun at the last one. Mike __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

12-28-2007, 07:32 AM	#28
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: The GSFMech Build Can't wait to see it. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-28-2007, 12:57 PM	#29
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: The GSFMech Build Nice work! Good to know about the GM parts and also good to see Wynne supplying another addict __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-29-2007, 06:12 AM	#30
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Hey Gringo, yeah Wynne has baled me out of a few tight spots hunting for parts. He has come to my rescue over and over. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

12-29-2007, 03:22 PM	#31
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: The GSFMech Build Thanks for the props guys, but I didn't do anything that Mike wouldn't do, or hasn't done for me. I'm just glad that I could help out with a worthy project. Great build thread Mike, I can't wait to see some paint fly on that thing! __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-13-2008, 02:12 AM	#32
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Time for a little update, I hope these pictures post OK I'm having a little camera problem. Anyway it's hard to tell in the first photo but the door gap at the top sucked. I had replaced the gutters and was beginning to think it was the gutter but I saw Bill (Palf70Step) do this mod on his truck so I thought I would try it. The next photo shows the spot welds drilled out. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2008, 02:15 AM	#33
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build The next photo shows the spot welds after I pulled the door frame up to make the frame fit the gap properly and you can see how much it was pulled up before I rewelded it and the minor body work. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 04-13-2008 at 02:38 AM. Reason: spelling

04-13-2008, 02:22 AM	#34
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Another pic of the bodywork and you can see how much I pulled it up a little better also a shot of it spot primered and the finished door frame. I know it's hard to tell in the photo but it really closed the gap up at the top and at the rear and it's more uniform all the way around, it was driving me crazy. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 04-13-2008 at 02:39 AM. Reason: spelling

04-13-2008, 02:31 AM	#35
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build I have the bed floor blocked and ready for paint as well as the front bed panel. The inside of the bedsides will need one more blocking but they are close. I blocked that floor 7 times with Dupont urethane filler primer, I think it's going to be nice. I sure hope so after all the work. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 04-13-2008 at 02:32 AM.

04-13-2008, 02:34 AM	#36
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build My buddy Kevin finished up the tailgate and it's ready to paint. I slipped the bed back together here because of storage space when I'm at work, I've been doing all the work with it broken apart on a rack built for the bed (crappy photo but you get the idea). Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2008, 04:11 AM	#37
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: The GSFMech Build looks good __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

04-13-2008, 04:45 AM	#38
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: The GSFMech Build Nice work....thanx for the update __________________ R.I.P. Killer 71 10/26/07

04-13-2008, 05:51 AM	#39
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: The GSFMech Build Nice progress GSFMECH! We have similar taste... __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

04-13-2008, 05:58 PM	#40
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: The GSFMech Build Nice work Mike! __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com



Register or Log In To remove these advertisements.

04-13-2008, 06:06 PM	#41
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: The GSFMech Build Good to see progress, bed floor looks great. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

04-13-2008, 09:16 PM	#42
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Thanks guys, LEEVON that is a good looking truck. I'll be glad when mine looks good again. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-14-2008, 03:13 AM	#43
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,640	Re: The GSFMech Build Mike, its looking great. Like Krue mentioned earlier, can't wait to see it at cruising, of course I hope to see mine there someday too. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-14-2008, 01:22 PM	#45
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build Thanks everyone. It sure feels good to make progress. Hey Bill, I'm hoping to have it ready for cruising the coast but it looks like I will have to work this year if my schedule stays the same so I won't make it. That's too bad I had fun hanging out with you guys last year.The rest of our bunch should make it though. Look out next year I will definitely have it there. Maybe you'll have yours done by then too. I'm hoping Wynne, Chris, Eric, Keith and a few more of us Louisiana guys have our trucks finished by then. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-15-2008, 01:57 AM	#46
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: The GSFMech Build Hey sweet truck, i really like the medium blue. Any one know more about it or where I can get some __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

05-22-2008, 10:02 PM	#47
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Re: The GSFMech Build GSFMech, check you PM's. Could we see a pic of your throttle linkage? __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

05-28-2008, 04:54 AM	#48
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build chevy72blu. The first photo is an original small block cable bracket. The second photo shows it side by side with my modified bracket, one from the top and one from the bottom. I bent the part over where the throttle spring fits and cut it to fit against the carb to keep it from moving. The last photo shows it mounted to the carb. It was a quicky, you can probably find something better from Summit or jegs. Hope this helps you. Mike Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

05-28-2008, 05:40 PM	#49
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Re: The GSFMech Build Ah hah... I never thought about going OUT with the cable, I was trying to figure out how to take it BACK. Thanks man, I appreciate it! Would you mind taking a measurement from the center of the hole that mounts to the carb base to the center of the hole where the cable is held by the clip piece? I am just going to fab one up from scratch out of some flat bar. __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e Last edited by chevy72blu; 05-28-2008 at 05:44 PM.

05-30-2008, 05:04 PM	#50
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: The GSFMech Build chevy72blu, It's 2-3/4". __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

Register or Log In To remove these advertisements.